PT INDONESIA COMNETS PLUS
TERM OF REFERENCE (TOR)
Pengadaan Material CPE Periode Januari_Maret
Tahun 2016
VERSI : PREPARE BY : FRW CHECKED BY : YTD APPROVED BY : YTD
1
1.
SPESIFIKASI TEKNIS
1.1
KONFIGURASI UMUM
Secara umum konfigurasi yang mendeskripsikan pemakaian Material CPE adalah sebagai berikut:
POP Terminating POP Terminating
User Originating
Switch CPE
User Terminating
Switch CPE
PT INDONESIA COMNETS PLUS
TERM OF REFERENCE (TOR)
Pengadaan Material CPE Periode Januari_Maret
Tahun 2016
VERSI : PREPARE BY : FRW CHECKED BY : YTD APPROVED BY : YTD
2
2.
BILL OF QUANTITY
Kebutuhan Material
Nama material
Description
Kebutuhan
Satuan
Material CPE Switch Manageable CPE Power AC, + 2 SFP LH Bidi 100 Unit
3.
SPESIFIKASI PERANGKAT
3.1
Tiap Material CPE dilengkapi 2 Buah SFP Bidi (Bidirectional) yang compatible dengan perangkat
distribusi ICON+, adapun perangkat Distribusi ICON+ :
-
Cisco 3600 Series
-
Cisco 3750 Series
-
Cisco 3400 Series
-
Cisco 3800 Series
-
Cisco 7600 Series
-
Cisco 7200 Series
-
Cisco ASR 920 Series
-
Huawei S5700 Series
-
Juniper ACX 4000 Series
-
Juniper MX 480 Series
3.2
Untuk Jenis/Jarak SFP :
LH = Memiliki range jarak 0-40km
ZX = Memiliki range jarak 0-120km
3.3
Untuk jumlahnya dapat dilihat pada lembar BOQ
3.4
Tiap
–
tiap material harus memiliki Serial Number dan Mac Address berbeda, baik untuk Perangkat
CPE maupun SFP nya
3.5
Memenuhi kualifikasi teknis perangkat sebagai berikut :
NO KUALIFIKASI TEKNIS MINIMUM REQ KETERANGAN
1 Up Link Port SFP Based (NNI) 1000 base-X 1 Gbps
Support ZX SFP
Support SFP CWDM CWDM Channel 1470 -
1610 nm
Support SFP Bi-Directional Single core
minimum 2 port
2 Down Link / Access Port (UNI) 10/100/1000 Base-T
minimum 2 ports
3 Standards VLAN (IEEE 802.1Q)
STP (IEEE 802.1d)
RSTP (IEEE 802.1w)
MSTP (IEEE 802.1s)
IEEE 802.3ad
IEEE 802.3ah
IEEE 802.1ag
IEEE 802.1p CoS classification
4 Performance Support 4K VLAN ID
Support MTU 9000 bytes
5 Multicast Supports IGMP v1/v2/v3 snooping
6 Power AC Power Supply range 100 V to 240 V,
50/60 Hz
7 Management Supports remote configuration and
maintenance by using Telnet.
Supports SNMP v1/v2/v3.
Supports SSH v2.
Supports Web management.
Support Authentication methods AAA, RADIUS, and TACACS+
PT INDONESIA COMNETS PLUS
TERM OF REFERENCE (TOR)
Pengadaan Material CPE Periode Januari_Maret
Tahun 2016
VERSI : PREPARE BY : FRW CHECKED BY : YTD APPROVED BY : YTD
3
NO KUALIFIKASI TEKNIS MINIMUM REQ KETERANGAN
QinQ
Selective QinQ
IEEE 802.1ag Connectivity Fault Management provides standard support for transport fault management. It allows for discovery and verification of path for Layer 2 services.
Ethernet Local Management Interface enables service providers to communicate service configuration and status information to the customer-edge device IEEE 802.3ah Ethernet in the First Mile provides standard support for monitoring, remote failure indication, loopback, and OAM discovery on the link between the customer equipment and service provider network.
ITU-T Y.1731 introduces the support for fault management functions, including alarm indication signal (AIS), remote defect indication (RDI) and locked signal (LCK) to detect and signal a failure in the service path
three Colour QoS
4.
REFERENSI PERANGKAT
Adapun referensi perangkat yang sudah dilakukan POC adalah.
Merk
Seri
Keterangan
ALU
7210
Baru, sudah POC
Juniper
EX series
Baru, sudah POC
RAD
ETX series
Baru, sudah POC
Huawei
S2700
Baru, sudah POC
ADVA
150-cc
