Teks penuh
Aditya Trias Pradana1*, Amelia Susetyo1, Christina Avanti1
1
Department of Pharmaceutics, College of Pharmacy, University of Surabaya, Indonesia.
*Corresponding author: Aditya Trias Pradana, phone: +62312981110, fax: +62312981111 [email protected]
Keywords: fenofibrate, ball mills, milling rate, particle size reduction.
ABSTRACT
Dokumen terkait
Hasi1 pengujian menunjukkan ada dua kelompok sampel yang memiliki mean skor social esteem yang berbeda, yaitu kelompok yang menilai aktor bertubuh pendek dan
The collated LSPR UV-Vis spectra of 5,000 µg/L colloidal AgNPs upon addition of ions i.e. The addition of cations with similar concentration causes the absorbance to
The results showed that the incorporation of lactose and maltodextrin as lyoprotectants improved functional properties, due to the better physical characteristics of the
The optimal concentration of WS2 nanoparticles for the preparation of doped PEDOT: PSS thin films is determined, at which the film resistance decreases by almost 2 times, the
For example, the average SAG Speed value in February 2018 to March 2018 from 8.6 rpm to 9.9 rpm and the consumption of steel balls increased in the same month from 72 thousand months to
Guruvaiah Naidu, Venkata Vishnu, Janardhana Raju, “Optimization Of Process Parameters For Surface Roughness In Milling Of EN-31 Steel Material Using Taguchi Robust Design Methodology”,
This study investigates the impact of spray drying conditions on the physical characteristics of coconut sugar powder, including particle size, moisture content, and
OIL, STIRRING SPEED 300 RPM, REACTION TEMPERATURE 60⁰C, MOLAR RATIO OF OIL:METHYL ACETATE =1:6 AND REACTION TIME 1 HOUR FAME Fatty Acid Methyl Esters Composition % Methyl Laurate
