RANCANG BANGUN SISTEM MONITORING LEVEL TANGKI BBM DENGAN SENSOR ULTRASONIK VIA SMARTPHONE ANDROID
BERBASIS MIKROKONTROLER ATmega8
ABSTRAK
Telah dirancang suatu alat sebagai monitoring volume pada tangki BBM dengan menggunakan mikrokontroler ATMega8. Alat ini terdiri dari sensor ultrasonik HC SR-04 yang berfungsi untuk mengukur jarak ataupun ketinggian, LCD M1632, dan dilengkapi dengan bluetooth sebagai jaringan penyambung antara tangki bbm dan smartphone android. Software pada alat ini menggunakan bahasa pemrograman CodeVision AVR. Alat ini digunakan untuk mengukur ketinggian zat cair pada tangki bbm sehingga diperoleh volume pada tangki bbm tersebut. Prinsip kerja sistem ini secara umum adalah dengan dimulai saat catudaya sistem diaktifkan. Kontroler akan melakukan tugasnya setelah reset awal dan inisialisasi. Kontroler akan membaca data sensor, pembacaan dimulai dengan mentrigger sensor untuk mulai membaca jarak. Setelah itu sensor akan memberikan data hasil deteksi. Data tersebut kemudian dikonversikan menjadi tinggi dan volume. Setelah memperoleh hasil olahan, data hasil tersebut kemudian ditampilkan pada LCD dan dikirim ke smartphone android melalui media bluetooth. Aplikasi monitoring akan mengambil data tersebut kemudian menampilkannya pada layar smartphone.
Kata Kunci: Mikrokontroler ATMega8, Sensor Ultrasonik HC SR-04, Bluetooth
DESIGN LEVEL MONITORING SYSTEM WITH SENSOR
ULTRASONIC FUEL TANK VIA SMARTPHONE ANDROID BY
USING MICROCONTROLLER ATmega8
ABSTRACT
It has been designed as a means of monitoring the volume of the fuel tank by using a microcontroller ATMega8. This device consists of an ultrasonic sensor HC SR-04, which serves to measure distances or heights, LCD M1632, and is equipped with Bluetooth as the connective tissue between the fuel tank and android smartphones. Software on the device using the programming language CodeVision AVR. This tool is used to measure the height of liquid in the fuel tank in order to obtain volume in the fuel tank. The working principle of this system in general is to begin when the power supply system is activated. The controller will perform his duties after the initial reset and initialization. The controller will read the sensor data, the reading begins with triggering the sensor to start reading distance. Once the sensors will provide data on the detection result. The data is then converted into high and volume. After obtaining the results processed, the data is then displayed on the LCD and sent to the android smartphone via bluetooth media. Application monitoring will take the data and then display it on the screen smartphone.
Keywords: ATMega8 Microcontroller, Sensor Ultrasonic HC SR-04, Bluetooth