Installing Bizcomps 2000 and the SIC Manual on an NT Server
Note: Make sure that the SIC and BIZCOMPS program folders are installed directly off the root of the server drive.
1) Install both Bizcomps 2000 and the SIC Manual to the server normally.
2) Download the bizcompw.exe file from http://www.wiley.com/techsupport/uploads.htm and copy this file into the BIZCOMPS folder on the server. Agree to overwrite when prompted. 3) Navigate to the SIC folder ond open the sic.ini file in a text editor.
4) Replace the line, Path=, with the line, Path=f:\SIC, where f is the drive letter of the server from the point of view of the workstations. Save and close the sic.ini file.
5) Copy the sic.ini file from the SIC folder into the BIZCOMPS folder
