DAFTAR PUSTAKA
[1] Othman, Nadras. “Characterisation and Properties of
Bentonite/Polyprophylene Composite”. Universiti Sains Malaysia. 2007
[2] Rosyadi, Iim Imron, Ahmad Mudzakir dan Budiman Anwar. “Preparasi dan
Karakterisasi Bentonit Termodifikasi Surfaktan Kationik Fatty Imidazolinium”. Jurnal Sains dan Teknologi Kimia, ISSN 2087-7412, Vol. 1, No. 2, Hal. 112-120. 2010.
[3] Chitraningrum, Nidya. “Sifat Mekanik dan Termal Pada Bahan Nanokomposit Epoxy-Clay Tapanuli”. Tugas Akhir, Program Sarjana Universitas Indonesia, Depok. 2008.
[4] Anandhan, S., dan S. Bandyopadhyay. “Polymer Nanocomposites : From Synthesis to Applications”. 2011.
[5] Boyle, Maureen A., Cary J. Martin, John D. Neuner. “Epoxy Resins”. 2006.
[6] Syuhada, Rachmat Wijaya, Jayatin, dan Saeful Rohman. “Modifikasi
Bentonit (Clay) Menjadi Organoclay Dengan Penambahan Surfaktan”. Jurnal Nanosains & Nanoteknologi, ISSN 1979-0880, Vol. 2, No. 1, Hal.
48-51. 2009.
[7] Ataiwi, Ali H. dan Alaa A. Abdul-Hamead. “Preparing Polyester-Bentonite Clay Nano Composite and Study Some of Its Mechanical Properties”. Emirates Journal for Engineering Research. Vol. 17 (1), Hal. 57-61. 2012.
[8] Bukit, Nurdin, Erna Frida dan Mukti Hamjah Harahap. “Preparation Natural Bentonite in Nano Particle Material as Filler Nanocomposite High Density Poliethylene (Hdpe)”. Chemistry and Materials Research. ISSN 2224-3224, Vol. 3, No. 13, Hal. 10-20. 2013.
[9] Oroh, Jonathan, Frans. P. Sappu dan Romels Lumintang. “Analisis Sifat Mekanik Material Komposit Dari Serat Sabut Kelapa. Universitas Sam Ratulangi Manado. 2013.
[10] Turnip, Rimbun. “Penggunaan Komposit Epoksi Berpenguat Serat Kevlar
[11] Jones,R. M. “Mechanics of Composite Materials”. Second Edition. Taylor & Francis : USA. 1999.
[12] Schwartz, M. M,. “Composite Materials Handbook”. McGraw Hill Book Company : New York. 1984
[13] Barleany, Dhena Ria, Rudi Hartono dan Santoso. “Pengaruh Komposisi Montmorillonite pada Pembuatan Polipropilen – Nanokomposit Terhadap Kekuatan Tarik dan Kekerasannya”. Pengembangan Teknologi Kimia untuk Pengolahan Sumber Daya Alam Indonesia. ISSN 1693 – 4393. Hal. D03-1 – D03-6. 2011.
[14] Juliani, Evi. “Aktivasi Bentonit Alam Sebagai Bahan Pengisi Pada Komposit Polietilen/High Density Polyethyline (HDPE) Untuk Bahan Teknik. Tesis. Program Pascasarjana FMIPA USU. 2013.
[15] Motawie, M.A., N.M. Ahmed., S.M.ElMessallamy., E.M. Sadek., N.G.Kandile. 2014. “Unsaturated Polyesters / Layered Silicate Nanocomposites : Synthesis and Characterization”. IOSR Journal of Applied Chemistry. Volume 7, Issue 10. PP 34-43. 2014.
[16] Ramimoghadam, Donya, Mohd Zobir Bin Hussein and Yun Hin Taufiq-Yap. “ The Effect of Sodium Dodecyl Sulfate (SDS) and Cetyltrimethylammonium Bromide (CTAB) on the Properties of ZnO Synthesized by Hydrothermal Method”. International Journal of Molecular Sciences. ISSN 1422-0067. 13. Hal. 13275-13293. 2012
[17] Nakahara, Hiromichi, Osamu Shibata dan Yoshikiyo Moroi. “Examination of Surface Adsorption of Cetyltrimethylammonium Bromide and Sodium Dodecyl Sulfate”. The Journal of Physical Chemistry B. 115. Hal. 9077-9086. 2011
[18] Seema, Mohammadi H., Apporva M A, R. Ravishankar. “Effect of Surfactants On The Electrodeposited Nickel Composite Coatings. International Journal of Technical Research and Applications. e-ISSN 2320-8163. Vol. 3, Issue 4. PP. 398-406. 2015
Self-Hollow Silica Nanoparticles”. Microporous and Mesoporous Materials. 142. Hal 601-608. 2011.
[20] Indahwahyuni, Fithri. “Pembuatan dan Karakterisasi Nanokomposit Karet Alam/Organobentonit Menggunakan Cetiltrimetilammonium Bromida, Polietilen Glikol dan Sodium Dodesil Sulfat Sebagai Pemodifikasi
Permukaan”. Tesis. FMIPA USU. 2013.
[21] Balebat, Tandang. “Pengaruh Penggunaan Bentonit Termodifikasi Fatty Imidazolinium Pada Struktur Mikro dan Karakter Mekanis Nanokomposit Polietilena-Organobentonit”. Skripsi. FMIPA Universitas Pendidikan Indonesia. 2011.
[22] Selvin, Thomas P., Joseph Kuruvilla, Thomas Sabu. “Mechanical
Properties of Titanium Dioxide-Filled Polystyrene Microcomposites”. Materials Letters 58. Hal 281-289. 2004.
[23] Faisal, Tengku, Z. H,. “Pengaruh Modifikasi Kimia Terhadap Sifat-sifat Komposit Polietilena Densitas Rendah (LDPE) Terisi Tempurung Kelapa”. Tesis Magister, Sekolah Pascasarjana USU. Medan. 2008.
[24] Callister, W.D,. “Material Science and Engineering”. Seventh Edition. John Wiley & Sons, Inc: Singapore. 2007
[25] Lokantara, P., Suardana, N.P.G,. “Studi Perlakuan Serat Serta Penyerapan Air Terhadap Kekuatan Tarik Komposit Tapis Kelapa/Polyester”. Jurnal Ilmiah Teknik Mesin Cakra. Vol. 3. No. 1. Hal. 49-56. 2009.
[26] Hirmawan, Buyung, Lizda J.M, Doty D.R. “Sifat Mekanik Komposit Serat
Bambu Akibat Pengaruh Musim Hujan Dengan/Tanpa Pelapisan”. FTI ITS.
2011.
[27] Sitorus, A., “Penyediaan Film Mikrokomposit PVC Menggunakan Pemlastis Stearin dengan Pengisi Pati dan Penguat Serat Alam”. Tesis Magister, Program Pascasarjana USU, Medan. 2009.
[29] Azeez, Asif Abdul, Kyong Yop Rhee, Soo Jin Park, dan David Hui. “Epoxy Clay Nanocomposites – processing, properties and applications : A review”.Composites : Part B. 2012.
[31] Aková E.I., "Development of Natural Fiber Reinforced Polymer Composites". Trenčianska univerzita A.Dubčeka v Trenčíne, Pri Parku 19, 911 06 Trenčín, Slovakia.
[32] MSDS, 2013. Material Safety Data Sheet. West System.
[33] MSDS, 2013. Material Safety Data Sheet Bentonite MSDS.
[34] MSDS, 2013. Material Safety Data Sheet Titanium Dioxide MSDS.
[35] MSDS, 2002. Material Safety Data Sheet General Purpose Epoxy Hardener.
[36] MSDS, 2013. Material Safety Data Sheet Cetyltrimethylammonium Bromide MSDS.
[37] Rittirong, Kajonpop, Suvit Uasopon, Paveena Prachayawasin, Nukul Euaphantasate, Kamon Aiempanakit, dan Sarute Ummartyotin. “CTAB as a Soft Template for Modified Clay as Filler in Active Packaging”. Data in Brief 3. Hal. 47-50. 2015
[38] Agil, Safarudin, Yeremias M. Pell, Wenseslaus Bunganaen. “Pengaruh Fraksi Volume Terhadap Sifat Mekanik Komposit Widuri-Polyester”. Fakultas Teknik Universitas Nusa Cendana. 2013
[39] Suwanto, Bodja. “Pengaruh Temperatur Post-Curing Terhadap Kekuatan Tarik Komposit Epoksi Resin yang Diperkuat Woven Serat Pisang”. e -Jurnal Wahana. 2009.
[40] Jalal, R., “Pembuatan Komposit Polipropilena Dengan Penguat Serat Polipropilena Terorientasi dan Bahan Pengikat Anhidrida Maleat”. Tesis Magister, Sekolah Pascasarjana USU. Medan. 2005
[42] Pavia, Donald L., Gary M. Lampman, George S. Kriz . “Introduction to Spectroscopy”. Western Washington University. Bellingham, Washington. 2001
[43] Wang, Ke, Ling Chen, Jingshen Wu, Mei Ling Toh, Chaobin He, Albert F. Yee., “Epoxy Nanocomposites with Highly Exfoliated Clay : Mechanical Properties and Fracture Mechanisms”. Macromolecules. Vol. 38. No. 3. Hal 788-800. 2005.
[44] Zhang, Aying, Dongxing Zhang. “Effects of Void on Physical Properties of Hygrothermal Conditioned CFRP”. Advanced Materials Research. Vols. 652-654. 2013.
[45] Masyithah, Zuhrina. “Optimasi Sintesis Surfaktan Alkanolamida Dari Asam Laurat Dengan Metode Dietanolamida dan N-Metil Glukamina Secara Enzimatik”. Disertasi. FMIPA USU. 2010.
[46] Ahmadi, Seyed Javad., Huang Yodong, dan Wei Li. “Synthesis of EPDM/Organoclay Nanocomposites : Effect of The Clay Exfoliation on Structure and Physical Properties.” Iranian Polymer Journal Vol. 13. No. 5. Hal 415-422. 2004
[47] Burlatsky, Sergei F., Vadim V. Atrazhev, Dmitry V. Dmitriev, Vadim. I. Sultanov, Elena N. Timokhina, Elena A. Ugolkova, Sonia Tulyani, Antonio Vincitore. “ Surface Tension Model for Surfactant Solutions at The Critical Micelle Concentration”. Moscow, Russia. 2013.
[48] Ray, Suprakas Sinha, Masami Okamoto. “Polymer / Layered Silicate Nanocomposites : A Review From Preparation to Processing”. Prog. Polym. Sci. Vol. 28. Hal 1539-1641. 2003.
[49] Kishore, A., D. B. Venkatesh, M. Ashok Kumar, A. Ramesh, K. Nikil Murthy, N. Karthikeyan. “Hydrophilic Modified Clay Nanocomposites : Effect of Clay on Thermal and Vibrational Properties”. International Letters of Chemistry, Physics and Astronomy. ISSN :2299-3843. Vol. 27. Hal 73-86
Bentonite Clay Nanocomposites”. Materials Research. Vol. 15(4). Hal 506 -509. 2012.
[51] Jdayil, Basim-Abu, Kaml Al-Malah, and Ranya Sawalha. “Study on Bentonie- Unsaturated Polyester Composite Materials”. Journal of Reinforced Plastics and Composites. Vol. 21. No. 17. 2002.
[52] Rull, N., RP Ollier, G Francucci, ES Rodriguez and VA Alvarez. “Effect of the addition of nanoclays on the water absorption and mechanical properties of glass fiber/up resin composites”. Journal of Composite Materials 0(0). 2014.
[53] Liu, X., Wu, Q., Berglund, L.A., Fan, J., and Qi, Z. “Polyamide 6-Clay Nanocomposites/Polypropylene-Grafted-Maleic Anhydride Alloys”. Polymer Vol. 42, Hal. 8235–8239. 2001.
