69
DAFTAR PUSTAKA
1.
Anasanne N, Ahhirao Y, Chitnis D, et al. The effect of joint surface contours and
glass fiber reinforcement on the transverse strength of repaired acrylic resin : An
in vitro study. Dental Research Journal 2013; 10(2):241-219
2.
Annusavice Kenneth J.
Philliphs buku ajar ilmu bahan kedokteran gigi. Trans.
Johan Arif Budiman, Susi Purwoko, Lilian Juwono, ads. Edisi 10. Jakarta : EGC,
2003:49-52, 59,177-235
3.
Vojdani M, Khaledi AAR.
Transverse strength of reinforced denture base resin
with
metil wire and e-glass fibers. Journal of Dentistry Tehran University of
Medical Science 2006; 3(4):167-172
4.
Hanna AE, Shah FK, Gebreel AA.
Effect of joint surface contours on the
transverse and impact strength of denture base resin repaired by various method.
An in vitro study. Journal of American Science 2010;6(9):115-125
5.
Sharma A, Priyanka B, Vasudeva K, et al.
Influence of repair material, surface
design and chemical treatment on the transverse strength of repaired denture
base – an in – vitro study. Indian Journal of Dental Sciences 2012;4(4):23-26
6.
Tandon R, Gupta S, Agarwal SK.
Denture base material: from past to future.
Indian Journal of Dental Sciences 2010;2(2):33-39
7.
Sharma K, Dhaksaini MR, Gujjari AK. Evaluation of transverse bond strength of
heat cured acrylic denture base resin repaired using heat polymerizing, auto
polymerizing and fiber reinforced composite resin
–
an in vitro study.
International Journal of Clinical Cases and Investigation 2012;4(2):33-43
8.
Alla RK, Sajjan S, Alluri VR, et al.
influence of fiber reinforcement on the
properties of denture base resin. Journal of Biomaterials and Nanobiotechnology
2013;4:91-97
9.
Narva KK, Lasilla LV, Valittu PK.
The static strength and modulus of fiber
reinforced denture base polymer. Elsevier 2005;21:421-428
70
10.
Vojvodic D, Komar D, Schauperl Z, et al.
Influence of different glass fiber
reinforcement on denture base polymer strength (fiber reinforcement of dental
polymer). Medicinski Glasmik 2009;6(2):227-234
11.
Siregar RR.
Pengaruh penambahan serat kaca potongan kecil dengan ukuran
berbeda terhadap kekuatan impak dan transversal resin akrilik polimerisasi
panas. Skripsi. Medan: universita Sumatera Utara, 2011
12.
Nakash SA, Kadhum I.
the influence of different chemical surface treatment on
transverse strength of repaired heat cure acrylic resins. Journal of Al Rafdain
University College 2013;31:93-115
13.
El-Sheikh AM, Al-Zahrani SB.
Causes of denture fracture : a survey. Saudi
dental Journal 2006;18(3):149-154
14.
Hashem M, Alsaleem SO, Assery MK, et al.
a comparative study of the
mechanical properties of the light-cure and conventional denture base resin.
OHDM 2014;13(2):311-315
15.
Kostoulas I, Kavoura VT, Frangou MJ, et al.
fracture force, deflection, and
toughness of acrylic denture repairs involving glass fiber reinforcement. Journal
of Prosthodontics 2008;17:257-261
16.
Majeed AEA. Effect of addition retebtion bead and repair material on transverse
strength of repaired acrylic denture resin. Iraqi Sci. J. Nursing 2010;23(2):60-65
17.
Mareti D.
Pengaruh penambahan serat kaca terhadap kekuatan transversal dan
modulus elastisitas bahan basis gigitiruan resin akrilik polimerisasi panas.
Skripsi. Medan: Universitas Sumatera Utara, 2014
18.
Stipho HD, Assery M.
Transverse strength of various resin joints repaired with
visible light cured reline material. The Saudi Dental Journal 1999;11(1):14-18
19.
Naveen BH, Patil SB, Kumaraswamy K. A study on transverse strength of
dofferent denture base resin repaired by various material and methods: an in
vitro study. Journal of Dental Science and Research;1(1);66-73
20.
Nallaswamy D.
Textbook of PROSTHODONTICS. New delhi : Jaypee Brothers
Medical publisher, 2003:291
71
21.
Nirwana I.
Kekuatan trasnversa resin akrilik hybrid setelah penambahan glass
fiber dengan metoda berbeda
. FKG Universitas Airlangga: 16-19
22.
Nilakhurinin.
Basis
gigitiruan
akrilik.
http://nilakhurinin.wordpress.com/2013/04/19/dentistry-life-note-basis-gigitiruan-resin-akrilik. 1 september 2014
23.
Gurbuz O, Unalan F, Dikbas I.
Comparison of the transverse strength of sic
acrylic denture resins. OHDMBSC 2010;11(1):21-24
24.
Carr AB, Brown DT.
Mc Cracken’s Removable Partial Prosthodontics
. 12
th.
Canada: Mosby Elsevier, 2011:305
25.
Mahajan H, Chandu GS, Mishra SK.
An in vitro study of the effect of design of
repair surface on the transverse strength of repaired acrylic using
autoplymerizing resin. Nigerian Journal of Clinical Practice 2014;17(1):38-42
26.
Wallenberger FT, Watson JC, Li H. Glass fibers. ASM Handbook 2001;21:27-33
27.
Bashi TK, Al-Nema L.
Evaluation of some mechanical properties of reinforced
acrylic resin denture base material (an in vitro study). Al-Rafidain Dent J
2009;9(1):57-65
28.
Hyer MW.
Stress analysis of Fiber reinforced composite materials. Singapore:
Mc GrawHill Companies, 1998:18-21
29.
Lee SI, Kim CW, Lim YJ, et al.
Strength of glass fiber reinforced PMMA resin
and surface roughness change after abrasion test. J Korean Acad Prosthodont
2007;45(3):310-318
30.
Tacir IH, Kama JD, Zortuk M, et al. Flexural properties of glass fibre reinforced
acrylic resin polymers. Australian Dental Journal 2006;51(1):52-56
31.
Lee SI, Kim CW, Kim YS.
Effect of chopped glass fiber on the strength of
heat-cured pmma resin. J Korean Acad Prosthodont 2001;39(6):589-597
32.
Gunawan DD.
Pengaruh Bentuk Sambungan Permukaan Reparasi Dengan dan
Tanpa Surface Treatment Terhadap Kekuatan Transversal Basis Resin Akrilik
Polimerisasi Panas. Skripsi. Medan:Universitas Sumatera Utara, 2014
72
33.
Naji SAR. A Clinical Study Of Complete Denture Fractures at Four Hospitals in