ABSTRAK
Penelitian ini bertujuan untuk mengetahui pengaruh waktu kontak dan kecepatan pengadukan untuk mencapai nilai maksimum terhadap penyerapan zat warna metilen biru menggunakan karbon aktif dari kulit durian dengan aktivasi KOH 2%. Analisa FTIR menunjukkan proses aktivasi mempengaruhi intensitas serapan di daerah panjang gelombang dan mengakibatkan terbentuknya pita C=C aromatik pada karbon aktif kulit durian. Analisa dilakukan dengan menggunakan alat Spektrofotometer UV-Vis untuk mengetahui nilai absorbansi dan konsentrasi akhir larutan metilen biru pada tiap variasi waktu kontak dan kecepatan pengadukan. Hasil penelitian dengan aktivator KOH2% menunjukkan kapasitas adsorpsi maksimum berada pada kecepatan pengadukan 150 rpm dan waktu kontak 90 menit yaitu sebesar 3,92 mg/g, sedangkan luas permukaan maksimum adalah pada kecepatan pengadukan 130 rpm dan waktu kontak 120 menit yaitu sebesar 1785,263 m2/g. Dari hasil perhitungan teoritis, nilai koefisien korelasi (R2) orde dua lebih mendekati angka satu (1) dibandingkan dengan orde satu. Persamaan orde satu memiliki nilai R2 = 0,808 dan persamaan orde dua memiliki nilai R2 =0,993, sehingga kinetika orde dua lebih merepresentasikan data adsorpsi penelitian ini. Orde dua mengindikasikan adsorpsi melibatkan reaksi kimia.
Kata kunci: karbon aktif, kulit durian, kapasitas adsopsi, luas permukaan, FTIR, Spektrofotometer UV-Vis
ABSTRACT
This study aims to determine the effect of contact time and stirring speed to achieve the maximum value of the absorption dye methylene blue using durian shell activated carbon with KOH 2% as activator. FTIR analysis showed the activation process affects the absorption intensity in the wavelength region and resulted in the formation of C = C aromatic ribbon on activated carbon durian skin. Analysis performed using an UV-Vis spectrophotometer to determine the absorbance values and the final concentration of methylene blue solution at each variation of contact time and stirring speed. The results of the research with activators KOH 2% showed maximum adsorption capacity is at stirring speed of 150 rpm and contact time 90 minutes is equal to 3.92 mg/g, whereas the maximum surface area is at stirring speed 130 rpm and contact time 120 minutes that is equal to 1785,263 m2/g. From the results of theoretical calculations, the correlation coefficient (R2) of order two is closer to one (1) compared to the first order. The equation of first order has a value of R2 = 0.808 and equations second order has a value of R2 = 0.993, so that second order kinetics adsorption more represents to data of this study. Order two indicated that the adsorption involves chemical reactions.
Keywords: activated carbon, durian shell, adsopsi capacity, surface area, FTIR, UV-Vis Spectrophotometer