b. balance from electives, being courses from the BE(Hons) list or other courses approved by the executive dean, with
(i) a minimum of #6 from courses on the BE(Hons) list, other than courses on the Mechanical Engi neering Part B0 list, and
(ii) a maximum of #4 from courses from part B0 of the Mechanical Engi- neering list, and
(iii) a maximum of #4 from level one courses not on the BE(Hons) list;
OR2. a. an extended major - #60, comprising
(i) #50 being all courses in part A compulsory;plus (ii) #10 from part B Electives under Extended Major; and
b. balance from electives, being courses from the BE(Hons) list or other courses approved by the Executive Dean.
Part A – Compulsory
Year 1, Semester 1
Course Code Units Course Title
ENGG1100 2 Engineering Design Year 1, Semester 1 or 2
Course Code Units Course Title
ENGG1300 2 Introduction to Electrical Systems ENGG1400 2 Engineering Mechanics: Statics & Dynamics ENGG1500 2 Engineering Thermodynamics
MATH1051 2 Calculus & Linear Algebra I [1]
Year 1, Semester 2
Course Code Units Course Title
ENGG1200 2 Engineering Modelling & Problem Solving
MATH1052 2 Multivariate Calculus & Ordinary Differential Equations Year 2 Semester 1
Course Code Units Course Title MATH2000
MATH2001
2 2
Calculus & Linear Algebra II
orAdvanced Calculus and Linear Algebra MECH2300 2 Structures & Materials
MECH2305 2 Introduction to Engineering Design and Manufacturing MECH2410 2 Fundamentals of Fluid Mechanics
Year 2 Semester 2
Course Code Units Course Title
MECH2100 2 Machine Element Design
MECH2210 2 Intermediate Mechanical & Space Dynamics MECH2700 2 Engineering Analysis I
Year 3 Semester 1
MECHANICALENGINEERING
Course Code Units Course Title
MATH2010 1 Analysis of Ordinary Differential Equations MECH3300 2 Finite Element Method & Fracture Mechanics MECH3400 2 Thermodynamics & Heat Transfer
MECH3600 2 Engineering Management & Communication STAT2201 1 Analysis of Engineering & Scientific Data Year 3 Semester 2
Course Code Units Course Title
MECH3100 2 Mechanical Systems Design MECH3200 2 Advanced Dynamics & Vibrations MECH3410 2 Fluid Mechanics
Year 3 or 4 #2 from -
Course Code Units Course Title
MECH3250 2 Engineering Acoustics MECH3750 2 Engineering Analysis II
ENGY4000 2 Energy Systems
METR3100 2 Sensors & Actuators Year 4
Course Code Units Course Title
METR4201 2 Introduction to Control Systems and at least #4 from -
Course Code Units Course Title
ENGG4011 6 Professional Engineering Project MECH4500 4 Engineering Thesis [2]
MECH4501 4 Engineering Thesis [2]
MECH4552 4 Major Design Project [2]
Part B Electives
Part B0 - Preparatory Mathematics & Science Electives CHEM1090 2 Introductory Chemistry [3]
MATH1050 2 Mathematical Foundations [1] [4]
PHYS1171 2 Physical Basis of Biological Systems [5]
Extended Major
Students enrolled in the extended major are required to obtain the major plus an additional #10 from introductory or advanced electives from Part B1 or B2, including a minimum of #8 from Part B2. Students participating in the CEED program and undertaking #6 ENGG4011 are only required to obtain an additional #8 towards the extended major, including a minimum of #6 from Part B2.
B1 - Introductory Electives
Course Code Units Course Title
CHEM1100 2 Chemistry 1
CSSE1001 2 Introduction to Software Engineering
ENGG1600 2 Introduction to Research Practices - The Big Issues PHYS1002 2 Electromagnetism and Modern Physics
B2 - Advanced Electives MECHANICAL ENGINEERING
166 167
Course Code Units Course Title
AERO4300 2 Aerospace Composites
CHEE4302 2 Electrochemistry & Corrosion ELEC2003 2 Electromechanics & Electronics ENGG4103 2 Engineering Asset Management
ENGG4900 2 Professional Practice and the Business Environment
ENGY4000 2 Energy Systems
FIRE3700 2 Introduction to Fire Safety Engineering MECH3250 2 Engineering Acoustics
MECH3305 2 Science & Engineering of Metals MECH3750 2 Engineering Analysis II
MECH4301 2 Materials Selection MECH4304 2 Net Shape Manufacturing MECH4450 2 Aerospace Propulsion
MECH4470 2 Hypersonics & Rarefied Gas Dynamics MECH4480 2 Computational Fluid Dynamics MECH4552 4 Major Design Project [2]
MECH4800 2 Space Engineering
MECH4950 2 Special Topics C MECH4951 1 Special Topics D METR3100 2 Sensors & Actuators METR4202 2 Advanced Control & Robotics
TIMS3309 2 Fundamentals of Technology and Innovation Management End notes
• [1] Students without at least a Sound Achievement in Senior Maths C are required to take MATH1050 as an elective before MATH1051
• [2] This course is offered over more than one semester. Enrol in the same course code in each semester.
• [3] CHEM1090 is not available for students with a Sound Achievement or higher in Senior Chemistry or equivalent.
• [4] MATH1050 is not available for students with a High Achievement or higher in Senior Maths C.
MATH1050 is not available to students who have passed MATH1051 and/or MATH1052.
• [5] PHYS1171 is not available for students with a Sound Achievement or higher in Senior Physics or equivalent.
MECHANICALENGINEERING
SYLLABUS OF UNIVERSITY SUBJECTS
INTEGRATED CHARACTER BUILDING A UIGE600001/UIGE610001
6 sks
Syllabus : Integrated Character Building A facilitates students to understand the basics of character formation and master the basics of cognitive power that is logic. Furthermore, to apply cognitive powers in generating good behaviors which are useful to themselves and society. The establishment of ethical behaviors based on ethics is also facilitated. Students are able to develop the basic strength of character and to know themselves as a human being, both as individuals and as part of a group so that they can develop themselves well enough. In a group, the students need to have skills that are needed to maintain an effective relationship in order to improve the quality of human life. Particularly as a citizen of Indonesia, students need to understand the nature of citizenship and basic philosophy of Pancasila in order to act and behave in accordance with the character of the Indonesian nation.
Core Competencies :
1. Students are able to analyze problems in depth individually, comprehensively, logicaly and criti- caly, and generate solutions using the logical and ethical principles and rules of logic and ethics 2. Students are capable of analyzing the problem individually, thoroughly and deeply about the
human being as an individual or as part of group
3. Students are individually able to understand, make critical reasoning and to build an open and critical mind to the problem of nationhood, statehood and citizenship in this dynamic world situation
4. Students are able to create and display a work that depicts the character in accordance with the principles of Pancasila
Learning Method : interactive lecture, Experiential Learning, Collaborative Learning, Problem Based Learning, Project-Based Assignment
Prerequisites : OBM (New Student Orientation) ACADEMIC WRITING
UIGE610002 3 sks
The objectives of the English component of the MPK program are :
1. To activate students, English so that they will be able to communicate effectively in English;
2. To enable students to develop the learning strategies and study skills needed to finish their study successfully and o continue learning on their own after taking the MPK program (to develop independent learners)
Main Competencies :
By the end of the course, students should be able to:
* listen to, understand and take notes of key information in academic lectures of between 5-10 minutes length;
* improve their listening skills through various listening materials and procedures;
* speak confidently, ask questions in and contribute to small group discussions;
* use different reading strategies needed to the effective readers;
* improve their reading skills through extensive reading material;
* develop skills in connecting ideas using appropriate transitions and conjunctions;
* work as part of a group to prepare and deliver a 25-minute presentation on an academic topic using appropriate organization, language and visual aids;
* write a summary of a short academic article;
* write an expository paragraph;
* write a short essay.
Learning Method :
Active learning, Contextual language learning, small group discussion.
Prerequisite :
* Students Learning Orientation/Orientasi Belajar Mahasiswa (OBM)
* UI English Proficiency Test
ENGLISH UIGE600003 MECHANICAL ENGINEERING
168 169
3 sks
Learning Objectives : After attending this subject, students are expected to capable of use English to support the study in university and improve language learning independently.
Syllabus : Study Skills : (Becoming an active learner, Vocabulary Building: word formation and using the dictionary Listening strategies Extensive reading) Grammar: (Revision of Basic grammar Types of sentences Adjective clauses, Adverb clauses Noun clauses, Reduced clauses) Reading: (Reading skills: skimming, scanning, main idea, supporting ideas, Note-taking Reading popular science arti- cle, Reading an academic text) Listening: (Listening to short conversations, Listening to a lecture and notetaking, Listening to a news broadcast, Listening to a short story) Speaking: (Participating in discussions and meetings, Giving a presentation) Writing: (Writing a summary of a short article Describing graphs and tables, Writing an academic paragraph, Writing a basic academic essay (5 paragraphs))
INTEGRATED CHARACTER BUILDING B UIGE600002/UIGE610004
6 sks
Syllabus : Integrated Character Building B facilitates students to practice identifying, analyzing, and resolving problems of nature and the environment by making use of integrative and quantitative information. This lecture aims to prepare the future generation who care about nature issues through the balanced development of hard skills and soft skills and have the skills of ICT (Information and Communication Technology).
Core Competencies:
1. Students have an ethic, moral, personality and good character in completing the task at hand;
2. Students role as citizens who take pride and love of the homeland and support the continuity of life;
3. Students are able to work together and have a high sensitivity and awareness to the community and the environment;
4. Students are able to think logically, critically and creatively;
5. Students are able to use mathematics to solve problems quantitatively;
6. Students are able to use information and communication technology (ICT) for development;
7. Students are able to analyze the system of nature integratively and comprehensively;
8. Students are able to act as wise managers of nature to build and maintain the preservation of nature for a better and sustainable life.
Learning Method : Blended e-Learning, Collaborative Learning (CL), Problem Based Learning (PBL) and Group Discussion (GD)
Prerequisites : OBM (New Student Orientation) Textbook : Digital Form can be downloaded from Scele
ISLAMIC STUDY
UIGE600010/UIGE610005 2 sks
General instructional objectives : The cultivation of students who have concern for social, na- tional and countrys issues based on Islamic values which is applied in the development of science through intellectual skills.
Learning Objectives : Course participants are expected to do the following when faced with a problem or issue which they must solve :
1. Analyze the problem based on the Islamic values they adopted 2. Analyze the problem by implementing active learning stages
3. Discuss and express their thoughts and ideas by using proper and correct Indonesian language in discussion and academic writing
Syllabus : Islam history: the meaning of Islam, the characteristic of Islam, the sources of Islamic teachings, Muhammad SAW as prophet and history figure, introduction of Islam in Indonesia, the teaching essence of Islam: the basic principle of Islam teachings, the unity of Allah, worship prac- tice in live, eschatology and work ethics, human’s basic rights and obligation, social structure in Islam: sakinah mawaddah and ramhah family, the social implication of family life, Mosque and the development of Islam, zakat and the economic empowerment of the people, Islam society, Science:
reason and revelation in Islam, Islam’s motivation in development of science, science characteristics, source of knowledge, IDI (each Faculty and Department/Study Program)
MECHANICALENGINEERING
CATHOLIC STUDY
UIGE600011/UIGE610006 2 sks
General instructional objectives :
1. To help deliver students as intellectual capital in implementing lifelong learning process to become scientists with mature personality who uphold humanity and life.
2. Be scholars who believe in God according to the teachings of Jesus Christ by continuing to be responsible of his faith in life in church and society.
Syllabus : Almighty God and the God teachings; Man, Morals, science technology and art; harmony between religions; Society, Culture, Politics, Law: the substance of theses studies will be addressed by integrating the four dimensions of the teachings of the Catholic faith: the personal dimension, the dimension of Jesus Christ, the dimension of the Church, and Community dimension. Dimensions are implemented in the following themes: People, Religion, Jesus Christ, the Church, and Faith in the society
CHRISTIAN STUDY UIGE600012/UIGE610007 2 sks
General instructional objectives : Cultivating students with comprehensive Christian knowledge and teaching in the midst of the struggle and the fight of the nation while also discussing the student’s participation in line with the study to help improve and build our country.
Learning Objectives : Course participants are expected to do the following when faced with a problem or issue which they must solve:
1. Analyze the problem based on the Christian values
2. Analyze the problem by implementing active learning stages
3. Discuss the problem by using proper and correct Indonesian language
Syllabus : History (Historical terms): Status of the Bible, the existence of God and Morality, Christ the Savior, the Holy Spirit as existence reformer and outlook on the world: Faith and Knowledge of Science, Church and service, Ecclesiology, Spiritual and enforcement of Christian Human Rights and the world of ethics: Christian Ethics, Christian and worship, Christianity and politics, Christian love and social reality: Christian Organizations, Students and Service, Christian and expectations.
HINDU STUDY
UIGE600013/UIGE610008 2 sks
Syllabus : Hindu religion, Hindu history), Source and scope of Hinduism (the Veda as the source of Hindu religion teachings, the scope of the teachings in Hindu religion), The concept of the God (Brahman) according to the Veda, the Path to Brahman (Catur Marga Yoga, Mantra and Japa), Human Nature (The purpose of human life, Human’s duties, obligations, and responsibilities both individually or collectively), Ethics and morality (Principles teaching, self-control), in-depth understanding of the scripture (deep understanding of the Bhagawadgita, deep understanding of the Sarasamuschaya), The Role of Hinduism in science, technology, and art (Hinduism benefits in science and technology in accordance with each department, benefit / the role of Hinduism in the arts), Cohesion and community’s prosperity /independence (Benefits of unity in the religious plurality, independent community (kerthajagathita) as a common goal, Tri Pitakarana), Culture as an expression of Hindu religious practice, Contribution to the Hindu religion teachings in the political life of nation and country, laws and the enforcement of justice, Awareness of and obeying the Rita / Dharma.
BUDDHIST STUDY
UIGE600014/UIGE610009 2 sks
Syllabus : Almighty God and the God Study (Faith and piety, Divine Philosophy/Theology), Human (Human Nature, Human Dignity, Human Responsibility), Moral (Implementation of Faith and Piety in everyday life), Science, Technology and Art (Faith, Science and Charity as a unity, the Obligation to study and practice what you are taught, Responsibility for nature and environment), harmony between religion (religion is a blessing for all mankind, the essence of the religious plurality and togetherness), community (the role of religious society in creating a prosperous independent society, the responsibility of religious society in the realization of human rights and democracy), Culture MECHANICAL ENGINEERING
170 171
(the responsibility of religious society in the realization of critical thinking (academic), work hard and fair), Politics (Religion contribution in the political life of nation and country), Law (Raise awareness to obey and follow God’s law, the role of religion in the formulation and enforcement of law, the function of religion in the legal profession)
KONG HU CU STUDY UIGE600015 2 sks
ARTUIGE600020-30 1 sks
The option of subjects that can be choosen :
Appreciation of Film (UIGE600020), Batik (UIGE600021), Photography (UIGE600022), Calligraphy (UIGE600023), Javanese Karawitan (UIGE600024), Balinese Dance and Karawitan (UIGE600025), Comic (UIGE600026), Painting (UIGE600027), Music and Vocal (UIGE600028), Theater (UIGE600029), Wayang (UIGE600030)
SPORT
UIGE600040-48 1 sks
The option of subjects that can be choosen :
Basketball (UIGE600040), Volley Ball (UIGE600041), Badminton (UIGE600042), Futsal (UIGE600043), Hockey (UIGE600044), Football (UIGE600045), Softball (UIGE600046), Tennis (UIGE600047), Table Tennis (UIGE600048)
SYLLABUS OF BASIC ENGINEERING SUBJECTS
CALCULUS 1
ENGE600001/ENGE610001 3 sks
Syllabus : This subject gives the opportunity for students to understand the basic concept of cal- culus and to be able to solve applied calculus problems. Students are also given the opportunity to understand basic concepts the functions of one variable, derivatives and integral functions of one variable, and its application.
CALCULUS 2
ENGE600002/ENGE610002 3 sks
Syllabus : This subject gives the opportunity for students to understand the basic concept of cal- culus and to be able to solve applied calculus problems. Students are also given the opportunity to understand the basic concept the function of two variables, or variables, total derivative and integral of the function of two or more variables and application. In addition, students can under- stand the basic concepts of sequence and series.
CALCULUS
ENGE600003/ENGE610003 4 sks
Syllabus : This subject gives the opportunity for students to understand the basic concept of cal- culus and to be able to solve applied calculus problems. Students are also given the opportunity to understand the basic concept the function of two variables, the total derivative of the function of two or more variables and its application. Students are also expected to understand the basic concept of sequence and series and the basic concept of vector and analytical geometry.
MECHANICALENGINEERING
LINEAR ALGEBRA
ENGE600004/ENGE610004 4 sks
Syllabus : This subject gives the opportunity for students to master the basic techniques of Linear Algebra and gain knowledge on how to implement said techniques in solving System of linear equa- tionss, determining the bases and dimension of vector space, as well as calculating eigen values and eigen vectors. This subject also gives students the opportunity to work with other objects, especially vectors and matrices.
PHYSICS (MECHANICS AND THERMAL) ENGE600005/ENGE610005
3 sks
Syllabus : Physics (Mechanics and Thermal) subject includes the topics of mechanics and thermo- dynamics. Calculus is use as a mathematic helping tool in the learning process. Students are given the opportunity to learn how to unite their understanding of the basic concept of the analytical capability, their numeracy in learning mechanics and thermodynamics. During the course of this subject, students are not only aim to increase the students’ knowledge of the basic physics concepts but also to increase their capability in using information technology and computer and to train their skills, such as: independent and group work and their communication skill.
Students will also be train on how to explain and analyse the nature phenomenon and the result of human engineering exist in their everyday lives by using the basic physics concept and applied them in their daily lives. Students are also taught to develop their synthesis ability and evaluating both quantitative and qualitative natural phenomenon and the result of human engineering in their surrounding environment by using basic physics concept. This subject will give students the opportunity to develop their ability to develop their presentation ability analyse the nature phe- nomenon and the result of human engineering from the mathematics and natural science point of view integrative and comprehensively.
PHYSICS (MECHANICS AND THERMAL) LABORATORY ENGE600006/ENGE610006
1 sks
Syllabus : Practical of Mechanics: Measurement, Moment of inertia, Gravity acceleration, Fluid density, Scratch coefficient, Collision, Swing torque, Viscosity of water, Young’s modulus, Viscosity of Newtonian fluid, Fluids surface tension, Oscillation, Practical of Heat: Coefficient of linear expan- sion, Heat conductivity, Thermocouple calibration, Calorimeter, Joule Constant, Laplace Constant, Heat Collector, Determining of air Cp/Cv, Expansion of fluids and water anomaly.
Notes: For Architecture and Interior Architecture Program, practical is not mandatory.
PHYSICS (ELECTRICITY, MWO) ENGE600007/ENGE610007 3 sks
Syllabus : Physics (Electricity, MWO) subject includes the topics of electricity, magnet, wave, and optics. Calculus is use as a mathematic helping tool in the learning process. Students are given the opportunity to learn how to unite their understanding of the basic concept of the analytical capability, their numeracy in learning mechanics and thermodynamics. During the course of this subject, students are not only aim to increase the students’ knowledge of the basic physics con- cepts but also to increase their capability in using information technology and computer and to train their soft skills, such as: independent and group work and their communication skill. Students will also be train on how to explain and analyze the nature phenomenon and the result of human engineering exist in their everyday lives by using the basic physics concept and applied them in their daily lives. Students are also taught to develop their synthesis ability and evaluating both quantitative and qualitative natural phenomenon and the result of human engineering in their surrounding environment by using basic physics concept.
MECHANICAL ENGINEERING