Nuclear Engineering as well as in Systems Management.
Ahmad has over 50 years’ hand-on experience in the nuclear power sector. He has worked, at national & international levels, in the areas of Policy & Planning, Management, Safety, Design, EPC contracting &
Construction, Commissioning, Operations & Maintenance, Supply Chain, Public Awareness, Training, Business Development and International Co- operation.
Ahmad has held senior positions with the Nuclear Power Corporation of India Ltd (NPCIL), Electronics Corporation of India Ltd (ECIL), & World Association of Nuclear Operators, (WANO) Tokyo. He has also worked for the International Atomic Energy Agency (IAEA), Atomic Energy of Canada Ltd (AECL) & the Indian Atomic Industrial Forum (IAIF). Additionally, Mr.
Ahmad has provided Consultancy to several National & International Consultants & Infrastructure Businesses.
Rayavarapu Prasada Rao
Department of Materials Science and Engineering, National University of Singapore
Dr. Rayavarapu obtained his Master Degree in Physics from Andhra University, India in 2000. He becomes a research fellow at Departement of Materials science and Engineering, the National University of Singapore since 2013. He is an expert on
development and materials synthesis of energy storage device. Some of his key research are structural studies of glassy electrolytes like xNa2O-(1- x)P2O5, xLi2O-yP2O5-zLiCl, xLi2S-(1-x)P2S5 using X-ray and molecular dynamics simulations; development of membranes for Li-air batteries and fabrication of all-solid-state battery using Li6PS5Br electrolyte.
Sanghyun Lee
High Energy Accelerator Research Organization, KEK, Ibaraki, Japan
Dr. Sanghyun Lee received his Master degree and Ph.D. in Department of Physics from Sungkyunkwan University in Korea on August 2013.
Currently, He joins the Pos-Doctoral program at KENS, IMSS, KEK in Japan.
His research interests lie in applying crystal and magnetic symmetry to study the complex problem of condensed matter physics and explaining the mechanism using crystallography. Recently, he studied the
magnetoelectric coupling of multiferroic BiFeO3, invar e ect of itinerant ferromagnetic SrRuO3, Neel-type magnetic ordering of Li2MnO3 with Mn honeycomb lattice, and spin-direction-dependent magnetic phase
transition of transition-metal monoxide. His current research focus is in the phase transition mechanism when magnetic order breaks crystal symmetry
Copyright © 2019 MRS-INA C&C. All rights reserved.
Theme: ColorMag by ThemeGrill. Powered by WordPress.
Table of contents
View all abstracts
Accepted papers received: 17 September 2018Published online: 19 November 2018Prelims
Papers
Metal, Ceramics, Composites and High-Temperature Materials
This site uses cookies. By continuing to use this site you agree to our use of cookies. To find out
more, see our Privacy and Cookies policy.
Volume 432
November 2018
Previous issue Next issue
The 1st Materials Research Society Indonesia Conference and Congress8–12 October 2017, Yogyakarta, Indonesia
011001 OPEN ACCESS
The 1st Materials Research Society Indonesia Conference and Congress
PDF View abstract
011002 OPEN ACCESS
Peer review statement
PDF View abstract
012001 OPEN ACCESS
Development of lotus-type porous material for heat pipe application using centrifugal slip casting process
S Supriadi, M Rasis, T Heriyanto, B Ariantara and N S D Putra PDF
View abstract
012002 OPEN ACCESS
Transformation of orthodontics bracket geometry in metal injection molding process
S Supriadi, D Abdussalam, T Heriyanto, B Irawan and B Suharno PDF
View abstract
012003 OPEN ACCESS
Ex-situ Li doped into HKUST-1 and their application in hydrogen storage
D Ni'maturrohmah, W W Lestari and H Suwarno +
PDF View abstract
012004 OPEN ACCESS
Application of nanocatalyst iron oxide (Fe O ) to reduce exhaust emissions (CO and HC)
P Puspitasari, C Yazirin, L A Bachtiar, J W Dika and SM S N S Zaharis 2 3
PDF View abstract
012005 OPEN ACCESS
Nanocatalyst manganese oxide (MnO) for exhaust emissions (CO and HC) reduction
P Puspitasari, M I N Sasongko, G A Kurniawan, Andoko and D I Tsamroh PDF
View abstract
012006 OPEN ACCESS
A study of the compression molding method for manufacturing a UHMWPE liner
F S Wicaksono, R Ismail and J Jamari PDF View abstract
012007 OPEN ACCESS
A comparison between mechanical properties of UHMWPE from ram extrusion process and UHMWPE from compression molding process for a hip joint liner
M Wahyudi, Y E Putra, S Arrohman, J Jamari and R Ismail PDF
View abstract
012008 OPEN ACCESS
Effect Of cobalt addition on Fe-20Cr-5Al-1Y O ODS alloy fabricated by arc plasma sintering (APS) process
B Suharno, D E Jodi, N R Pratama and A Dimyati 2 3
PDF View abstract
012009 OPEN ACCESS
Development of Fe-20Cr-5Al-1Y O ODS alloy with addition of Ni by means of Arc plasma sintering (APS) method
A Dimyati, N R Pratama, D E Jodi and B Suharno 2 3
PDF View abstract
012010 OPEN ACCESS
Effective dose analysis of extremely low frequency (ELF) magnetic field exposure to growth of S. termophilus, L. lactis, L. acidophilus bacteria
Sudarti, T Prihandono, Yushardi, Z R Ridlo and A Kristinawati PDF
View abstract
012011 OPEN ACCESS
Quality characterization of HVOF thermal spray coating with NiCr matrix composite for protection application of coal fired boiler tubes
M Waldi, E A Basuki and B Prawara PDF View abstract
012012 OPEN ACCESS
The synthesis of NiCrAlHf powders with mechanical alloying method for thermal sprayed coating
R D Desiati, E Sugiarti, S Ramandhany and S J Winarno PDF
View abstract
012013 OPEN ACCESS
Chloride solution leaching of platinum from Indonesia gold ore artisanal mining
S Harjanto, A Lazuardiyani, M Y Salam, M Taris and F W Pratama PDF
View abstract
012014 OPEN ACCESS
Polypropylene/clay nanocomposites prepared in an internal mixer: optimization of processing conditions to improve flexural modulus
Zaiby, A S Yogi, L J Ariadne and U Onny PDF
View abstract
012015 OPEN ACCESS
Failure analysis of S50C carbon steel applied for fine boring transmission system
L Anggraini
PDF View abstract
012016 OPEN ACCESS
Analysis of the remaining life of API 5L grade B gas pipeline in the flare gas recovery unit
M Y M Sholihin, H S Kusyanto and B Soegijono PDF
View abstract
Nuclear Science and Technology Application
012017 OPEN ACCESS
The effect of silicon as a reactive element for NiCrAl coating performance on hastelloy substrate
S Ramandhany, E Sugiarti, R D Desiati, E Martides, E Junianto, B Prawara and A Sukarto PDF
View abstract
012018 OPEN ACCESS
Synthesis and thermomechanical characterization of peg/zircon composites
N F Muwwaqor, N A Fauziyah, Musyarofah and S Pratapa PDF
View abstract
012019 OPEN ACCESS
Study of temperature effect on carbide layer formation behaviour of dual elements thermal reactive deposition on SUJ2 steel substrate
M Ariati, W Narottama P and A Cipto PDF View abstract
012020 OPEN ACCESS
Effect of synthesis parameters on crystal structure and magnetic properties of cobalt zinc ferrite (Co Zn Fe O ) nanoparticles
A T Puspitasari, H Kiswanto, E Suharyadi, T Kato and S Iwata 0.5 0.5 2 4
PDF View abstract
012021 OPEN ACCESS
Development of 410S-Y O oxide dispersion strengthened steel prepared by a powder metallurgy technique
T Sudiro, R C Ekaputra, K A Z Thosin, A Trenggono, A Afandi and B Hermanto 2 3
PDF View abstract
012022 OPEN ACCESS
The performance of the AAA and Acurox XB algorithms in the case of lung cancer
R Zulfani, M Fadli and S A Pawiro PDF View abstract
012023 OPEN ACCESS
Point dose verification in breast cancer radiotherapy: comparison between 3D conformal and IMRT technique
F Manulang, F Y Dimitri, Nelly, Y Wahyono, R Susworo and S A Pawiro
Nano-materials. Nano-tech, Thin Film and Functional
PDF View abstract
012024 OPEN ACCESS
Organ at risk dose verification in nasopharyngeal cancer VMAT planning with collimator comparison between single arc and double arc
F Y Dimitri, F Manulang, Nelly, Y Wahyono, R Susworo and S A Pawiro PDF
View abstract
012025 OPEN ACCESS
Moderator material efficiency of neutron energy slowing down on D-T reaction neutron generator for SAMOP
S Santosa and A H Anggraini PDF View abstract
012026 OPEN ACCESS
Ion beam preliminary testing of DECY-13 cyclotron at the central region using dc extraction voltage
S Silakhuddin, R S Darmawan, S Suharni, F S Permana, K Wibowo, S Saminto and T Atmono PDF
View abstract
012027 OPEN ACCESS
Safety assessment of near surface disposal for radioactive waste in Serpong nuclear area using PRESTO software
Sucipta and D Suganda PDF View abstract
012028 OPEN ACCESS
Integration of superior varieties of sidenuk rice production with beef cattle business
Suharyono, S N W Hardani, T Wahyono and C E Kusumaningrum PDF
View abstract
012029 OPEN ACCESS
Fabrication of gas diffusion layer from carbon ramie fiber by hot press method
D A Gumilar, N Indayaningsih, A Subhan, N Prastomo and S Hastuty PDF
View abstract
012030 OPEN ACCESS
Polymers, Bio-materials and Other Soft Matters
Performance of post-hidrothermally treated xerogel TiO dye-sensitized solar cell (DSSC) and its nanostructure characteristic
B Priyono, A H Yuwono, A Z Syahrial, M H Mustofa and R S Bawono 2
PDF View abstract
012031 OPEN ACCESS
Antioxidant activity and dose enhancement factor of CeO nanoparticles synthesized by precipitation method
I Nurhasanah, W Safitri, Z Arifin, A Subagio and T Windarti 2
PDF View abstract
012032 OPEN ACCESS
Fabrication and characteristics of ADC-12 reinforced nano-SiC and nano-Al O composites through stir casting route
A Zulfia, E C Putro, M Wahyudi, D Dhaneswara and B W Utomo
2 3
PDF View abstract
012033 OPEN ACCESS
Annealing temperature effect on structural, vibrational and optical properties of Co Ni Fe O nanoparticles
J Utomo, A K Agustina and E Suharyadi 0.8 0.2 2 4
PDF View abstract
012034 OPEN ACCESS
Hydrogen storage properties of mechanical milled MgH2-nano Ni for solid hydrogen storage material
Z Jalil, A Rahwanto, Malahayati, Mursal, E Handoko and H Akhyar PDF
View abstract
012035 OPEN ACCESS
The cycles of mankind: begin from and ended back to nature
R Harjanto
PDF View abstract
012036 OPEN ACCESS
The effect of molecular weight on the surface wettability of polystyrene treated with nitrogen plasma
Masruroh, T N Zahirah, Aulanni'am, S P Sakti and D J D H Santjojo
PDF View abstract
012037 OPEN ACCESS
Fabrication of magnesium ecap based maxillary miniplate-typed implant through the method of micro forming
S Supriadi, H Kristianto, Y Whulanza, A S Saragih, R Dhelika, B S Latief and Taufiq PDF
View abstract
012038 OPEN ACCESS
Thermal properties of thermoplastic natural rubber reinforced by microfibrillar cellulose
I N Indrajati, I R Dewi and D W Nurhajati PDF
View abstract
012039 OPEN ACCESS
Effect of compatibilizers on the mechanical and morphological properties of polycarbonate/poly (acrylonitrile-butadiene-styrene) blends
I R Dewi, I N Indrajati and D W Nurhajati PDF
View abstract
012040 OPEN ACCESS
Thermal stability of shoe upper leather: Comparison of chestnut and quebracho as vegetable tanning agent
G Griyanitasari, I F Pahlawan and E Kasmudjiastuti PDF
View abstract
012041 OPEN ACCESS
Thermal degradation and swelling behaviour of acrylonitrile butadiene styrene rubber reinforced by carbon black
H E Mayasari, I Setyorini and A Yuniari PDF
View abstract
012042 OPEN ACCESS
Characterization of starch degradation during simple heating for bioethanol production from the avocado seed
C D Pratywi, S Marantika, P Dwijananti and Masturi PDF
View abstract
012043 OPEN ACCESS
The effect of CaCO filler component on mechanical properties of polypropylene
C Budiyantoro, H Sosiati, B P Kamiel and M L S Fikri 3
PDF View abstract
012044 OPEN ACCESS
Characteristics of hydroxyapatite from buffalo bone waste synthesized by precipitation method
I Pawarangan and Y Yusuf PDF View abstract
012045 OPEN ACCESS
Porous-structure engineering of hydroxyapatite-based scaffold synthesized from Pomacea canaliculata shell by using polyethylene oxide as polymeric porogen
V J Mawuntu and Y Yusuf PDF View abstract
012046 OPEN ACCESS
Synthesis and characterization of hydroxyapatite based on green mussel shells (perna viridis) with the variation of stirring time using the precipitation method
M Sari and Y Yusuf
PDF View abstract
012047 OPEN ACCESS
The effect of clay and mixing conditions to fire resistant and mechanical property of unsaturated polyester – glass fiber composites by a vacuum bagging method
D A Priyani, S Prabowo, A L Juwono and O Ujianto PDF
View abstract
012048 OPEN ACCESS
Effect of multi walled carbon nanotube (MWCNT) and mixing conditions on unsaturated polyester (UP) physical properties
V Prawitasari, O Ujianto and A L Juwono PDF
View abstract
012049 OPEN ACCESS
Haematological and inflammatory responses of intramedullary tibial iron based implant in sheep
S F Siallagan, R E Nurjannah, H Raudlowi, H Maheshwari, M Silalahi, A Boediono, S Estuningsih and D Noviana PDF
View abstract
012050 OPEN ACCESS
Theoritical Modelling and Simulation of Materials
Energy Materials and Devices
Effect of fibre sequence on the mechanical properties of woven fan palm/glass fabric reinforced polymer hybrid composites
H Hestiawan, Jamasri and Kusmono PDF View abstract
012051 OPEN ACCESS
Energy adsorption of carbon-based material doping boron with Ti and Ni metal ion decoration for hydrogen storage application using density functional theory
V V R Repi, S R Wicaksono and F Hidayanti PDF
View abstract
012052 OPEN ACCESS
Position accuracy evaluation of multileaf collimator (MLC) static in linear accelerator
Y Rahmat, S A Pawiro, Y A Baihaqi, M Fadli and A Nainggolan PDF
View abstract
012053 OPEN ACCESS
Modification of ZIF-8 using direct mixing method at a room temperature
A Mustaqim, B Yuliarto and Nugraha PDF View abstract
012054 OPEN ACCESS
Computer aided diagnosis (CAD) for thorax radiography children patient with segmentation deformable models method
R Seftina, Prawito and D S Soejoko PDF View abstract
012055 OPEN ACCESS
Preparation of LiFePO added PPy as cathode materials for li-ion battery
I Gunawan, J Ginting, P Yustinus and Sudaryanto 4
PDF View abstract
012056 OPEN ACCESS
Effect of samarium in Al-Zn-Cu as a micro-alloying element for low voltage sacrificial anode
D Ferdian, Y Pratesa and F Y Ramadhan PDF
View abstract
Nuclear Science and Technology Application
012057 OPEN ACCESS
Development of battery performance data acquisition system for monitoring battery performance inside solar cell system
A E Mulyono, T Mustika, H P Sulaikan and E Kartini PDF
View abstract
012058 OPEN ACCESS
Synthesis of Na Ti O –based anode for sodium-ion battery using solid state reaction method
P Slamet, W B Widayatno, A Subhan and B Prihandoko 2 3 7
PDF View abstract
012059 OPEN ACCESS
The improving conductivity of LiFePO4 by optimizing the calendaring process
Deswita, Sudaryanto, H Djodi and E Kartini PDF
View abstract
012060 OPEN ACCESS
Carotenoid pigment as sensitizers for applications of dye-sensitized solar cell (DSSC)
A Supriyanto, F Nurosyid and A H Ahliha PDF
View abstract
012061 OPEN ACCESS
Comparative study on the ionic conductivities and redox properties of LiPF6 and LiTFSI electrolytes and the characteristics of their rechargeable lithium ion batteries
A R Septiana, W Honggowiranto, Sudaryanto, E Kartini and R Hidayat PDF
View abstract
012062 OPEN ACCESS
Synthesis of Li Ti O -Sn by ultrasonic method as anode materials for lithium ion battery
Y Purwamargapratala, S Sudaryanto, E Kartini and M Manawan 4 5 12
PDF View abstract
012063 OPEN ACCESS
Indonesian consortium of lithium ion battery for solar street lamp
E Kartini, A Purwanto, S Sudaryanto, W Honggowiranto and R N S Rofika PDF
View abstract