• Tidak ada hasil yang ditemukan

Design_and_Development_of_SHIPS_ROV

N/A
N/A
Protected

Academic year: 2023

Membagikan "Design_and_Development_of_SHIPS_ROV"

Copied!
9
0
0

Teks penuh

(1)

Design and Development of SHIPS-ROV

By Basuki Rahmat

(2)

1

1

1

1

1

1 1

1 3

3 3

4

7

1111 15

(3)

1

1

1

2

2

(4)

2

2

2 2

2 6 7

9

9 13

(5)

2

4 6

6 10

14

(6)

5

5 12

(7)

52 %

SIMILARITY INDEX

1

2 3 4 5

6

Design and Development of SHIPS-ROV

ORIGINALITY REPORT

PRIMARY SOURCES

Budianto, I Sutrisno, M B Ramat, R Indarti, A W B Santosa. "Analysis static load to strength a Ship-

RUV structure using finite element method", IOP Conference Series: Materials Science and Engineering, 2021

Crossref

www.researchgate.net

Internet

icast.isas.or.id

Internet

p3m.ppns.ac.id

Internet

Budianto, Muhammad Basuki Rahmat, Imam Sutrisno, I’ie Suwondo, Iskandar. "Maneuverings

behavior on the Ship-RUV during operational trials condition", IOP Conference Series: Materials Science and Engineering, 2021

Crossref

dokumen.pub

Internet

303 words —  12%

237 words —  9%

173 words —  7%

157 words —  6%

154 words —  6%

90 words —  4%

(8)

9 10

11 12 13

14 15

ousar.lib.okayama-u.ac.jp

Internet

Leong Wai Lunn Alexander, Muhammad Muzakkir Ahmad Roslan, Khalid Isa, Herdawatie Abdul Kadir,

Radzi Ambar. "Design and Development of an Autonomous Underwater Vehicle (AUV) with Target Acquisition Mission Module", 2018 IEEE 8th International Conference on

Underwater System Technology: Theory and Applications (USYS), 2018

Crossref

en.wikipedia.org

Internet

eprints.polsri.ac.id

Internet

Stathis C. Stiros, Christos Vichas, Costas Skourtis.

"Landslide Monitoring Based On Geodetically

Derived Distance Changes", Journal of Surveying Engineering, 2004Crossref

www.ncbi.nlm.nih.gov

Internet

I Putu Sindhu Asmara, Adianto, M. Anis

Mustaghfirin, Beta Dena Qowima, Sumardiono,

Gaguk Suhardjito. "An Evaluation on Operability and Maneuverability of Small Coastal Fishing Vessel Using

Simulation and AIS Data", 2018 International Conference on Applied Science and Technology (iCAST), 2018

Crossref

42 words —  2%

34 words —  1%

18 words —  1%

13 words —  1%

13 words —  1%

8 words —  < 1%

8 words —  < 1%

7 words —  < 1%

(9)

EXCLUDE QUOTES OFF EXCLUDE BIBLIOGRAPHY ON

EXCLUDE SOURCES OFF EXCLUDE MATCHES OFF

Referensi

Dokumen terkait

The general purpose of shear testing is to determine the mechanical properties, which is the maximum shear strength of the material that can sustain before failure occurs. This is

First explanation will come to the machines, processes, cutting tools and operation sequences for lathe machine in order to know the element used to calculate

Test Rig for bending and torsion on vehicle structure has been widely used by automotive car manufacturers and researchers to measure the vehicle strength and stiffness on a

The Finite Element Method will be used to predict out of plane displacement and von mises stress of the bumper during the collision under the specified load. This is to find the

Then the wind load, F, acting in a direction ordinary to the character structural element or Cladding unit is: F= Cpe – Cpi A Pd wherein, Cpe = external strain coefficient, Cpi =

It is very much clear from the results produced by the ANSYS In static load conditions deflection and stresses of steel leaf spring and composite leaf spring are found with the great

Figure 4 4.3 Lateral Load Analysis NZS 4203:1976 1 allows the base shear coefficient for the seismic static lateral loading to be factored by 0.9 if a dynamic modal analysis is

DEVELOPMENT OF POWER QUALITY MEASURING DEVICE Page 110 of 162 FOR NET POWER METERING AND LOAD MONITORING Michael Andhika [35] Federal Energy Regulatory Commission.. Amendments to