PYROLYSIS OIL PRODUCTION FROM
MUNICIPAL POLYETHYLENE (PE) PLASTIC WASTE Page 69 of 81
Alvina Faraditya REFERENCES
Adams, T. N. et al. (2004) CONVERTING TURKEY OFFAL INTO BIO-DERIVED HYDROCARBON OIL WITH THE CWT THERMAL PROCESS. Available at:
https://ergosphere.files.wordpress.com/2007/04/cwt_genconflasvegas3_3_04.pdf (Accessed: 20 June 2019).
Arifin, E. (2018) Indonesia’s plastic waste problem | The ASEAN Post. Available at:
https://theaseanpost.com/article/indonesias-plastic-waste-problem-0 (Accessed: 31 October 2018).
Dharma, U. S. and Irawan, D. (2015) ‘Analisa Karakteristik Minyak Plastik Hasil Dua Kali Proses Pirolisis’, Turbo : Jurnal Program Studi Teknik Mesin, 4(1), pp. 7–11. doi:
10.24127/trb.v4i1.645.
Efendi, Y. et al. (2016) Makalah Pengolahan Nabati: Pengemasan HDPE. Available at: https://sovianafa.blogspot.com/2016/06/kemasan-hdpe.html (Accessed: 3 November 2018).
Ermawati, R. (2011) ‘KONVERSI LIMBAH PLASTIK SEBAGAI SUMBER ENERGI ALTERNATIF’, Journal of Industrial Research (Jurnal Riset Industri), 5(3), pp. 257–263. Available at: http://ejournal.kemenperin.go.id/jri/article/view/3319 (Accessed: 31 October 2018).
Geyer, R., Jambeck, J. R. and Law, K. L. (2017) ‘Production, use, and fate of all plastics ever made’, Science Advances, 3(7), p. e1700782. doi: 10.1126/sciadv.1700782.
Hahladakis, J. N. et al. (2018) ‘An overview of chemical additives present in plastics:
Migration, release, fate and environmental impact during their use, disposal and recycling’, Journal of Hazardous Materials, 344, pp. 179–199. doi:
10.1016/j.jhazmat.2017.10.014.
Kaiser, W. (2011) Kunststoffchemie für Ingenieure von der Synthese bis zur Anwendung. Hanser.
PYROLYSIS OIL PRODUCTION FROM
MUNICIPAL POLYETHYLENE (PE) PLASTIC WASTE Page 70 of 81
Alvina Faraditya Kissounko, D. A., Taynton, P. and Kaffer, C. (2017) ‘New material: vitrimers promise to impact composites’, 00. doi: 10.1016/j.repl.2017.06.084.
Krisnayana, R. (2011) CATALYTIC CRACKING. Available at:
http://rinakrisnayana.blogspot.com/2011/04/catalytic-cracking.html (Accessed: 4 November 2018).
Lemley, B. and Law, T. (2003) ‘Anything Into Oil’. Available at:
http://discovermagazine.com/2003/may/featoil/ (Accessed: 20 June 2019).
Malpass, D. B. and Wiley InterScience (Online service) (2010) Introduction to industrial polyethylene : properties, catalysts, processes. Scrivener Pub. Available at:
https://books.google.co.id/books?id=-7cWD7MrtfEC&pg=PA1&redir_esc=y (Accessed: 4 November 2018).
McCarthy, N. (2018) The Countries Polluting The Oceans The Most | Statista.
Available at: https://www.statista.com/chart/12211/the-countries-polluting-the- oceans-the-most/ (Accessed: 13 November 2018).
Mertes, A. (2018) Types of Plastic and Their Recycle Codes | Quality Logo Products®.
Available at: https://www.qualitylogoproducts.com/promo-university/different-types- of-plastic.htm (Accessed: 31 October 2018).
Muklis (2011) Chemical Engineer: Thermal Cracking Process. Available at:
http://muklis-chemicalengineer.blogspot.com/2011/01/thermal-cracking-process.html (Accessed: 4 November 2018).
Naimah, S. and Aidha, N. N. (2017) ‘KARAKTERISTIK GAS HASIL PROSES PIROLISIS LIMBAH PLASTIK POLIETILENA (PE) DENGAN MENGGUNAKAN KATALIS RESIDUE CATALYTIC CRACKING (RCC)’, Jurnal Kimia dan Kemasan, 39(1), pp. 31–38. doi: 10.24817/jkk.v39i1.2750.
Nic, M., Jirat, J. and Kosata, B. (2006) IUPAC Compendium of Chemical Terminology.
Edited by M. Nič et al. Research Triagle Park, NC: IUPAC. doi: 10.1351/goldbook.
Pramudya, R. A. N. and Rahma, S. N. (2015) ‘Pengolahan Sampah Plastik Menjadi
PYROLYSIS OIL PRODUCTION FROM
MUNICIPAL POLYETHYLENE (PE) PLASTIC WASTE Page 71 of 81
Alvina Faraditya Sumber Bahan Bakar Cair Menggunakan Proses Pirolisis’, p. 53. Available at:
https://www.academia.edu/17168772/Pirolisis_Plastik (Accessed: 16 January 2019).
Prasetiowati, Y. and Koestiari, D. (2014) KAPASITAS ADSORPSI BENTONIT TEKNIS SEBAGAI ADSORBEN ION Cd 2+ CAPACITY OF ADSORPTION TECHNICAL BENTONITE AS ADSORBENT Cd 2+ IONS, UNESA Journal of Chemistry. Available at: http://jurnalmahasiswa.unesa.ac.id/index.php/unesa-journal-of- chemistry/article/viewFile/9798/9559 (Accessed: 16 January 2019).
Santoso, J. (2010) UJI SIFAT MINYAK PIROLISIS DAN UJI PERFORMASI KOMPOR BERBAHAN BAKAR MINYAK PIROLISIS DARI SAMPAH PLASTIK. Universitas Sebelas Maret. Available at: https://eprints.uns.ac.id/6591/1/139301108201008381.pdf (Accessed: 5 November 2018).
Sulistyono (no date) PENGGUNAAN PRODUK PLASTIK DARI PETROKIMIA DENGAN BAHAN DASAR MINYAK DAN GAS BUMI MANFAAT DAN BAHAYANYA BAGI KESEHATAN DAN LINGKUNGAN. Available at: https://mail- attachment.googleusercontent.com/attachment/u/0/?ui=2&ik=6cf7f25efc&attid=0.1&
permmsgid=msg-
f:1634325137384311163&th=16ae4a0dad48897b&view=att&disp=inline&realattid=f ile1&saddbat=ANGjdJ-
nZzNi3XLgdswjqp90R5836GlZzEjvZrlSTPr6fTQpPCFIQJ4d1nic9Xs (Accessed: 23 May 2019).
Surono, U. B. (2013) Berbagai Metode………Bahan Bakar Minyak BERBAGAI METODE KONVERSI SAMPAH PLASTIK MENJADI BAHAN BAKAR MINYAK.
Yogyakarta. Available at: http://www.jurnalteknik.janabadra.ac.id/wp- content/uploads/2014/03/05-Artikel-Untoro-Revisi.pdf (Accessed: 3 November 2018).
