LEMBAR
HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH : PROSIDING
Judul Karya Ilmiah : Experimental Study on the Performance of a R-22 Freezer Retrofitted with R-290 Jumlah Penulis : 3
Status Pengusul : Penulis ke-2
Identitas Prosiding : a. Judul Prosiding : Materials Today: Proceedings 13 (2019)
The International Conference on Advanced Materials Science and Technology 2018
b. ISBN/ISSN : 2214-7853
c. Thn Terbit, Tempat Pelaks. : 2019, Semarang d. Penerbit/Organiser : Elsevier
e. Alamat Repository/Web : https://www.sciencedirect.com/science/article/
pii/S2214785319305668
Alamat Artikel : http://eprints.undip.ac.id/79498/1/
Experimental_Study_on_the_Performance_of_a_
R-22_Freezer_Retrofitted_with_R-290.pdf f. Terindeks di (jika ada)
Kategori Publikasi Makalah : Prosiding Forum Ilmiah Internasional (beri pada kategori yang tepat) Prosiding Forum Ilmiah Nasional Hasil Penilaian Peer Review :
Komponen Yang Dinilai
Nilai Maksimal Prosiding
Nilai Akhir Yang Diperoleh Internasional Nasional
a. Kelengkapan unsur isi prosiding (10%) 3 2,8
b. Ruang lingkup dan kedalaman pembahasan (30%)
9 7,8
c. Kecukupan dan kemutahiran data/informasi dan metodologi (30%)
9 8,5
d. Kelengkapan unsur dan kualitas terbitan /prosiding (30%)
9 8,6
Total = (100%) 30 27,7
Nilai Pengusul = 40% x 27,7 / 2 = 5,54
Catatan Penilaian Paper oleh Reviewer :
1. Kesesuaian dan kelengkapan unsur isi prosiding:
Artikel terdiri dari: Title, Abstract, Introduction, Materials and Method, Results and Discussion, Conclusion, Acknowledgment, References dan ditulis sesuai dengan Guide for Author. Substansi artikel merupakan salah satu bidang fokus Teknik Mesin
2. Ruang lingkup dan kedalaman pembahasan:
Artikel membahas tentang retrofitting R22 menjadi R290 untuk sebuah freezer. Hasil penelitian ini menunjukkan retrofitting R22 menjadi R290 akan memperbaiki performansi frezeer. Pembahasan belum melakukan komparasi dengan peneliti lain. Masih menyajikan data hasil eksperimen 3. Kecukupan dan kemutakhiran data/infrmasi dan metodologi:
Jumlah referensi dalam 10 tahun terakhir sebanyak 3 dari 11 artikel (27.3%). Tingkat kebaruan cukup baik. Metode penelitian dituliskan cukup lengkap. Penelitian dilakukan secara eksperimental dengan peralatan ukur yang akurat.
4. Kelengkapan unsur dan kualitas terbitan:
Jurnal diterbitkan oleh Elsevier. Seminar diselenggarakan oleh Consortium of Materials Science and 11th October 2018: Workshop Technology (KoSoTeM) and Materials Research Society of I ndonesio (MRS-Id), masuk dalam kategori jurnal terindeks Sgoogle Schoolar. Kualitas terbitan cukup baik dan konsisten serta dilengkapi dengan petunjuk penulisan yang jelas. Nilai similaritas artikel berdasarkan Turnitin sebesar 17%.
Semarang, 23 Maret 2020 Reviewer 1
Prof. Dr. Widayat, ST., MT.
NIP. 197209061998031001
Unit Kerja : Fakultas Teknik Universitas Diponegoro Bidang Ilmu : Teknik Kimia
: Google Scholar
LEMBAR
HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH : PROSIDING
Judul Karya Ilmiah : Experimental Study on the Performance of a R-22 Freezer Retrofitted with R-290
Jumlah Penulis : 3
Status Pengusul : Penulis ke-2
Identitas Prosiding : a. Judul Prosiding : Materials Today: Proceedings 13 (2019)
The International Conference on Advanced Materials Science and Technology 2018
b. ISBN/ISSN : 2214-7853
c. Thn Terbit, Tempat Pelaks. : 2019, Semarang d. Penerbit/Organiser : Elsevier
e. Alamat Repository/Web : https://www.sciencedirect.com/science/article/
pii/S2214785319305668
Alamat Artikel : http://eprints.undip.ac.id/79498/1/
Experimental_Study_on_the_Performance_of_a_R-22_Fre ezer_Retrofitted_with_R-290.pdf
f. Terindeks di (jika ada) : Google Scholar Kategori Publikasi Makalah : Prosiding Forum Ilmiah Internasional (beri pada kategori yang tepat)
Prosiding Forum Ilmiah Nasional Hasil Penilaian Peer Review :
Komponen Yang Dinilai
Nilai Maksimal Prosiding
Nilai Akhir Yang Diperoleh Internasional Nasional
a. Kelengkapan unsur isi prosiding (10%) 3 3,00
b. Ruang lingkup dan kedalaman pembahasan (30%)
9 6,00
c. Kecukupan dan kemutahiran data/informasi dan metodologi (30%)
9 7,50
d. Kelengkapan unsur dan kualitas terbitan /prosiding (30%)
9 8,25
Total = (100%) 30 24,75
Nilai Pengusul = 40% x 24,75 / 2 = 4,95 Catatan Penilaian artikel oleh Reviewer :
1. Kesesuaian dan kelengkapan unsur isi prosiding:
Artikel ditulis sesuai dengan kaidah penulisan suatu artikel ilmiah pada prosiding.
2. Ruang lingkup dan kedalaman pembahasan:
Ruang lingkup cukup jelas. Pembahasan terbatas.
3. Kecukupan dan kemutakhiran data/informasi dan metodologi:
Data cukup. Metodologi cukup jelas.
4. Kelengkapan unsur dan kualitas terbitan:
Materials Today: Proceedings 13 (2019) atau The International Conference on Advanced Materials Science and Technology 2018 termasuk prosiding internasional terindeks scopus. Sehingga nilai AK maksimum 30. Ybs sebagai penulis kedua dari 3 penulis, dimana penulis pertama = penulis korespondensi, sehingga nilai maksimum = 1/2 x 40% x 30 = 6.
Surakarta, 11 Maret 2020 Reviewer 2
Prof. Dr. techn. Suyitno, S.T., M.T.
NIP. 197403262000031001
Unit Kerja : Fakultas Teknik Universitas Sebelas Maret Bidang Ilmu : Teknik Mesin
Document details
References (11)
1 of 6
Experimental study on the performance of a R-22 freezer retrofitted with R- 290
(Conference Paper), ,
Mechanical Engineering Department, Faculty of Engineering, Diponegoro University Jl. Prof. Soedarto, SH, Tembalang, Semarang, 50275, Indonesia
Abstract
R-22 has a relatively high nature of global warming, the use of R-22 must be stopped. Refrigerant r290 / R290 is the type of refrigerant recommended by many experts to replace R-22 because the global warming properties of R-290 are much lower than R-22. In this research, cooling capacity, mass flow rate, the power consumed, and COP were evaluated. The freezer machine used has a capacity of 1 PK, redesigned by adding ducting to the condenser channel.
Overall results, R290 can be a better substitute for the R22 in real applications due to excellent ambient, thermo- physical properties, and energy-saving performance. © 2019 Elsevier Ltd. All rights reserved.
SciVal Topic Prominence
Topic:
Prominence percentile: 97.646
Author keywords
Cooling capacity COP Mass flowrate Power consumption R22 R290
Funding details
Funding text
The authors would like to thank Sadikin the laboratory of energy supervisor (Training Center) of Diponegoro University of Semarang, for providing testing facilities and assistance with technical support.
◅ Back to results Next ▻
RIS export
Download
Print
E-mail
Save to PDF⋆
Save to list More...▻
View at Publisher
Materials Today: Proceedings Volume 13, 2019, Pages 160-164
6th International Conference on Advanced Materials Science and Technology, ICAMST 2018;
Semarang; Indonesia; 9 October 2018 through 10 October 2018; Code 155285
Pujianto, M.E. Tamtomo Kiono, B.F. Tony Suryo, M.S.K.
Save all to author list
View references (11)
Refrigerants | Refrigeration | Discharge temperature
ISSN: 22147853
Source Type: Conference Proceeding Original language: English
DOI: 10.1016/j.matpr.2019.03.207 Document Type: Conference Paper
Volume Editors: binAhmad A.L.,Khairurrijal K.,Triyana K.,Nur H.,Wasisto H.S.,Diantoro M.
Publisher: Elsevier Ltd
▻ View in search results format All RIS export
Print
E-mail
Save to PDF Create bibliographyPlumX Metrics
Usage, Captures, Mentions, Social Media and Citations beyond Scopus.
Metrics
Cited by 0 documents
Inform me when this document is cited in Scopus:
Related documents
, (2017) Energy Procedia
, (2019) AIP Conference Proceedings
,
(2018) International Journal of Engineering, Transactions A:
Basics
Find more related documents in Scopus based on:
❓ View all metrics ▻
Set citation alert ▻ ▻ Set citation feed
Performance Investigation of Natural Refrigerant R290 as a Substitute to R22 in Refrigeration Systems
Choudhari, C.S. Sapali, S.N.
Experimental study of small wall room air conditioner for R-22 retrofitted with R290 95.5%
Berkah Fajar, T.K. Tanaka, I.R.
Testing of environment friendly refrigerant R290 for water cooler application
Choudhari, C.S. Sapali, S.N.
View all related documents based on references
▻
Authors Keywords ▻
Brought to you by Universitas Diponegoro
Search Sources Lists SciVal ↗ AH
Powell, R.L.
(2002) Journal of Fluorine Chemistry, 114 (2), pp. 237-250. . doi: 10.1016/S0022-1139(02)00030-1
Choudhari, C.S., Sapali, S.N.
(Open Access)
(2017) Energy Procedia, 109, pp. 346-352. . doi: 10.1016/j.egypro.2017.03.084
(1997) IIT Delhi, p. 110016.
Ecofrig
Devotta, S., Padalkar, A.S., Sane, N.K.
(2005) International Journal of Refrigeration, 28 (4), pp. 594-604. . doi: 10.1016/j.ijrefrig.2004.09.013
Yu, C.-C., Teng, T.-P.
(2014) Applied Thermal Engineering, 66 (1-2), pp. 507-518. . doi: 10.1016/j.applthermaleng.2014.02.050
Miyara, A.
(2008) International Journal of Refrigeration, 31 (4), pp. 621-632. . doi: 10.1016/j.ijrefrig.2007.12.003
Granryd, E.
(2001) International Journal of Refrigeration, 24 (1), pp. 15-24. . doi: 10.1016/S0140-7007(00)00065-7
Palm, B.
(2008) International Journal of Refrigeration, 31 (4), pp. 552-563. . doi: 10.1016/j.ijrefrig.2007.11.016
1
CFC phase-out: Have we met the challenge?
Cited 112 times View at Publisher
2
Performance Investigation of Natural Refrigerant R290 as a Substitute to R22 in Refrigeration Systems
Cited 22 times http://www.sciencedirect.com/science/journal/18766102
View at Publisher
3
4
Performance assessment of HC-290 as a drop-in substitute to HCFC-22 in a window air conditioner
Cited 71 times View at Publisher
5
Retrofit assessment of refrigerator using hydrocarbon refrigerants
Cited 41 times
http://www.elsevier.com/wps/find/journaldescription.cws_home/630/description#description
View at Publisher
6
Condensation of hydrocarbons - A review
Cited 30 times
View at Publisher
7
Hydrocarbons as refrigerants - an overview
Cited 129 times
View at Publisher
8
Hydrocarbons as refrigerants in small heat pump and refrigeration systems - A review
Cited 141 times View at Publisher
1 of 6 Dalkilic, A.S., Wongwises, S.
(2010) International Communications in Heat and Mass Transfer, 37 (9), pp. 1340-1349. . doi: 10.1016/j.icheatmasstransfer.2010.07.006
J. Houcek, M. Thedford. Texas, 1984
Calm, B.Y.J.M., Hourahan, G.C.
(2011) Proceedings of 23rd International Congress of Refrigeration (ICR2011), pp. 21-26. . Prague, Czech Republic, August
Pujianto, M.E.; Mechanical Engineering Department, Faculty of Engineering, Diponegoro University Jl. Prof.
Soedarto, SH, Tembalang, Semarang, Indonesia; email:
© Copyright 2019 Elsevier B.V., All rights reserved.
9
A performance comparison of vapour-compression refrigeration system using various alternative refrigerants
Cited 106 times View at Publisher
10
11
Cited 96 times
vanhebleedi@gmail.com
◅ Back to results Next ▻ Top of page
About Scopus
What is Scopus Content coverage Scopus blog Scopus API Privacy matters
Language
⽇本語に切り替える 切换到简体中文 切換到繁體中文 Русский язык
Customer Service
Help Contact us
Copyright © . All rights reserved. Scopus® is a registered trademark of Elsevier B.V.
We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the .
Terms and conditions ↗ Privacy policy ↗
↗ Elsevier B.V
use of cookies
Source details
Materials Today: Proceedings
Scopus coverage years: 2005, from 2014 to 2019 E-ISSN: 2214-7853
Subject area:
Materials Science: General Materials ScienceView all documents
▻
Save to source list Journal HomepageCiteScore 2018
1.09
Add CiteScore to your site
SJR 2018
0.299
SNIP 2018
0.694
CiteScore CiteScore rank & trend CiteScore presets Scopus content coverage
Calculated using data from 30 April, 2019
CiteScore
*CiteScore includes all available document types
1.09
=Citation Count 2018 Documents 2015 -
2017*
=
Metrics displaying this icon are compiled according to , a collaboration between industry and academia.
2018
▻ 3,686 Citations
▻ 3,385 Documents
▻
View CiteScore methodology CiteScore FAQ
▻
Last updated on 08 January, 2020
CiteScoreTracker 2019
1.13
=Citation Count 2019 Documents 2016 - 2018
=
Updated monthly▻ 6,842 Citations to date 6,044 Documents to date ▻
↗
Snowball Metrics
CiteScore rank
Category Rank Percentile
Materials Science
#244/438 44th
General Materials Science
▻
View CiteScore trends
About Scopus
What is Scopus Content coverage Scopus blog Scopus API Privacy matters
Language
⽇本語に切り替える 切换到简体中文 切換到繁體中文 Русский язык
Customer Service
Help Contact us
Copyright © . All rights reserved. Scopus® is a registered trademark of Elsevier B.V.
We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the .
Terms and conditions ↗ Privacy policy ↗ Elsevier B.V ↗
use of cookies
Brought to you by Universitas Diponegoro
Search Sources Lists SciVal ↗ AH
1/13/2020 ICAMST 2018 - The International Conference on Advanced Materials Science and Technology 2018
kosatem.org/icamst2018/ 1/2
ICAMST 2018
(http://kosatem.org/icamst2018/)
The International Conference on Advanced Materials Science and Technology 2018
icamst2018@kosatem.org (mailto:icamst2018@kosatem.org) +6282135243883 (tel:+6282135243883)
(tel:#)
DOCUMENTATION
Main Ballroom Photos
(https://drive.google.com/open?
id=1MMtfdoNx9wDV-jt3StA6KqXJF1aRtyqt)
Click to Open
Parallel Session Photos
(https://drive.google.com/open?
id=1WuexgA4NSxBrnVSjDSH6LIMBRLYho74X)
Click to Open
Accepted Abstract
(https://docs.google.com/spreadsheets/d/13Lq60RDi K6yGtrkoxHr7ArzB7r0nHViyAQ6FyWXvLV8/edit?
usp=sharing)
Click to Open
ICAMST 2018
The International Conference on Advanced Materials Science and Technology 2018. Selected paper will be published: 1. Reputable International Journal (Buletin of Chemical Reaction Engineering and Catalysis); 2.
Technology Journal; 3. Proceeding indexed by Scopus
1/13/2020 ICAMST 2018 - The International Conference on Advanced Materials Science and Technology 2018
kosatem.org/icamst2018/ 2/2
LATEST BLOG
Conference Venue
(http://kosatem.org/icamst2018/
venue/)
The 6th ICAMST 2018 will be held in Novotel Hotel, Se
Read More
(http://kosatem.org/icamst2018/conference- venue/)
Organizing Committee
(http://kosatem.org/icamst2018/
committee/)
Scienti c Commitee : Kuwat Triyana, UGM, Indonesia Mic
Read More
(http://kosatem.org/icamst2018/organizing- committee/)
Abstract Submission (http://kosatem.org/
submission/)
Submission System Submissio and Full Paper
Read More
(http://kosatem.org/icamst20 submission/)
Information
Manuscript Preparation Clinics
(http://kosatem.org/icamst2018/manuscript- preparation-clinics/)
Contact Us
(http://kosatem.org/icamst2018/contact- us/)
Important Date
(http://kosatem.org/icamst2018/important- date/)
Conference Venue
(http://kosatem.org/icamst2018/conference- venue/)
Organizing Committee
(http://kosatem.org/icamst2018/organizing- committee/)
Secretariat
Membrane Research Group,
Integrated Laboratory 4th Floor, Room 4.7 Universitas Diponegoro
Jl. Prof. Soedarto No. 1, Tembalang, Semarang 50275
Brochure
(http://kosatem.org/icamst2018/wp- content/uploads/sites/5/2018/08/Pam et- ICAMST-2018.jpeg)
© 2018 ICAMST|Provided by KoSaTeM (KOnsorsium SAins dan TEknologi Material) ()
1/13/2020 Materials Today: Proceedings | The 6th International Conference on Advanced Materials Science and Technology 2018(6th ICAMST…
https://www.sciencedirect.com/journal/materials-today-proceedings/vol/13/part/P1 1/8
Articles in press Latest issue Article collections All issues Submit your article
The 6th International Conference on Advanced Materials Science and Technology 2018(6th ICAMST), Semarang, Indonesia, 9-10 October 2018
Edited by Abdul Latif binAhmad, Khairurrijal K, Kuwat Triyana, Hadi Nur, Hutomo Suryo Wasisto, Markus Diantoro Volume 13, Part 1,
Pages 1-316 (2019) Download full issue
Previous vol/issue Next vol/issue
Receive an update when the latest issues in this journal are published
Set up journal alertsResearch article Full text access
Composite Paint based on Barium-Strontium-Hexaferrite as an Absorber of Microwaves at X-band Frequency
Yohanes Edi Gunanto, Maya Puspitasari Izaak, Henni Sitompul, Wisnu Ari AdiPages 1-4
Download PDF Article preview
Research article Full text access
Diffusion Phenomenon of Dysprosium Element during Electro-deposition Process on the Bonded Nd Fe B Magnet
Didik Aryanto, Toto Sudiro, Zaini Kemas Thosin, Agus Sukarto Wismogroho, ... Masno GintingPages 5-12
Download PDF Article preview
Research article Open access
Electrical Properties of Tetrahedrite CuS based Thermoelectric Material
Dicky Aditya, Rizky Aditya Sawitri, Markus DiantoroPages 13-17
Download PDF Article preview
Research article Full text access
Observation of the Polystyrene Swelling Effect using Quartz Crystal Microbalance
↗Search in this journal
2 14
1/13/2020 Materials Today: Proceedings | The 6th International Conference on Advanced Materials Science and Technology 2018(6th ICAMST…
https://www.sciencedirect.com/journal/materials-today-proceedings/vol/13/part/P1 2/8
Tyas Nurul Zafirah, Dionysius Joseph Djoko Herry Santjojo, Masruroh Masruroh, Setyawan Purnomo Sakti Pages 18-23
Download PDF Article preview
Research article Full text access
Stability of Polystyrene Film Surface Wettability Modified Using Oxygen Plasma
Putri Surya Arinda, Dionysius Joseph Djoko Herry Santjojo, Masruroh Masruroh, Setyawan Purnomo Sakti Pages 24-29
Download PDF Article preview
Research article Full text access
The Influence of Chitosan on Crystal Size and Microstructure of Nano-Hydroxyapatite from Cuttlefish Bone-Chitosan Composites
Hartatiek, Nurur Rohmawati, Dewi Worowati, Nasikhudin, ... Umi Lestari Pages 30-35
Download PDF Article preview
Research article Full text access
Structure Analysis of Nanocomposite ZnO:Fe O based Mineral Yarosite as Fe O Source and its Application Probability
Hasniah Aliah, D Gustaman Syarif, Ryan Nur Iman, Asti Sawitri, ... Pikriansyah GumarangPages 36-40
Download PDF Article preview
Research article Full text access
A Paper Label Made from Carmoisine Dyes as a Radiochromic Indicator for Gamma Rays
Prasetya Widodo, Marlina Harahap, Arie Listyarini, Cuk ImawanPages 41-46
Download PDF Article preview
Research article Full text access
Optimization Parameters Tooling Design to Increase the Surface Quality of Orthotic Insole Shoes using the Taguchi Approach and Surface Response Methods
Baju Bawono, Paulus Wisnu Anggoro, Muhamad Tauviqirrahman, Jamari Jamari, ... Abet Adhy Antony Pages 47-52
Download PDF Article preview
Research article Full text access
Stearic Acid Coating Material Loading Effect to Quartz Crystal Microbalance Sensor
Setyawan Purnomo Sakti, Masruroha, Daniel Dwipaskawijaya Kamasi, Nike Fitayatul Khusnah Pages 53-58Download PDF Article preview
Research article Full text access
Synthesis and Characterization of Active Cathode Material of LiFeSi P O /C with Variation of Doping Si Ions
Bambang Prihandoko, Mochamad Zainuri, Nindita Kirana, Slamet Priyono, Ilma NuroniahPages 59-64
Download PDF Article preview
Research article Full text access
Synthesis and Characterization of Al-Doped Li Ti O with Sol Gel Method for Anode Material Lithium Ion Battery
Ilma Nuroniah, Slamet Priyono, Achmad Subhan, Bambang Prihandoko, ... Ahmad SohibPages 65-70
2 3 2 3
x 1-x 4
4 5 12
1/13/2020 Materials Today: Proceedings | The 6th International Conference on Advanced Materials Science and Technology 2018(6th ICAMST…
https://www.sciencedirect.com/journal/materials-today-proceedings/vol/13/part/P1 3/8
Download PDF Article preview
Research article Full text access
Mechanical Strength of 10 kW Wind Turbine Blade Utilize Glass Fiber Reinforced Plastic
Wiji Mangestiyono, Bambang Setyoko, Dista Yoel Tadeus, YuniartoPages 71-75
Download PDF Article preview
Research article Full text access
Synthesis and Characterization HY Zeolite from Natural Aluminosilicate for n-Hexadecane Cracking
Indah Revita Saragi, Yuni Krisyuningsih Krisnandi, Riwandi SihombingPages 76-81
Download PDF Article preview
Research article Full text access
Influence of Thickness on Optical Properties of Bismuth Ferrite Layers Grown on Quartz Substrates by Chemical Solution Deposition
Mawar Santika, Yofentina Iriani, Risa Suryana Pages 82-86
Download PDF Article preview
Research article Full text access
Optical Absorbance of Porous Silicon on n-type Si (111) Surfaces Fabricated by Electrochemical Anodization Method
Mita Handayani, Nur'aini Dian Pratiwi, Risa SuryanaPages 87-91
Download PDF Article preview
Research article Full text access
Fabrication of Porous Silicon using Photolithography and Reactive Ion Etching (RIE)
Nuraini Dian Pratiwi, Mita Handayani, Risa Suryana, Osamu NakatsukaPages 92-96
Download PDF Article preview
Research article Full text access
Preparation of α-Fe O -Al O Catalysts and Catalytic Testing for Biodiesel Production
Widayat Widayat, Dionisius Andhika Putra, Izmi NursafitriPages 97-102
Download PDF Article preview
Research article Full text access
The Graphene Flake Edge Geometry Effect on Electronic Structure
Valerius Evan Ligasetiawan, Toto WinataPages 103-108
Download PDF Article preview
Research article Full text access
Finite-element Analysis for Structural Strength Assessment of Marine Sandwich Material on Ship Side-shell Structure
Tuswan Tuswan, Kharis Abdullah, Achmad Zubaydi, Agung BudipriyantoPages 109-114
Download PDF Article preview
2 3 2 3
Available online at www.sciencedirect.com
ScienceDirect
Materials Today: Proceedings 13 (2019) 92–96 www.materialstoday.com/proceedings
2214-7853© 2019 Elsevier Ltd. All rights reserved.
Peer-review under responsibility of the scientific committee of The 6th International Conference on Advanced Materials Science and Technology 2018, 6th ICAMST.
ICAMST 2018
Fabrication of Porous Silicon using Photolithography and Reactive Ion Etching (RIE)
Nur’aini Dian Pratiwi
a, Mita Handayani
a, Risa Suryana
a,*, Osamu Nakatsuka
baDepartment of Physics, Faculty of Mathematics andNatural Sciences, Sebelas Maret University,Jl. Ir. Sutami 36A Surakarta 57126 Indonesia
bDepartment of Materials Physics, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
Abstract
Phenomena of electrical and optical properties in porous silicon (PSi) remain interested. In this study, we focus on fabrication of PSi on N-type Si(100) surface using photolithography and reactive ion etching (RIE) methods with variations of etching times for10, 20, 30, and 40 min. SEM analysis demonstrated similar Psi in shape and size. Based on the profilometer and the four-point probe (FPP) measurement, the pore depth and the resistivity of Psi increase with the increasing etching time. The pores can be consideredas a defect on the silicon surface which inhibits electron diffusion so that the resistivity will increase.
© 2019 Elsevier Ltd. All rights reserved.
Peer-review under responsibility of the scientific committee of The 6th International Conference on Advanced Materials Science and Technology 2018, 6th ICAMST.
Keywords: porous; silicon; photolithography; etching; resistivity
1. Introduction
A dye-sensitized solar cell (DSSC), the third generation of the solar cell, has been the competitive technology for silicon (Si) solar cell. At least five significant parts which affect the DSSC efficiency i.e., the transparent conducting oxide (TCO) such as indium tin oxide (ITO) or fluorine-doped tin oxide (FTO) as a photoanode, the semiconductor oxide such as TiO
2or ZnO, the dye as photosensitizer, the catalyst as a counter electrode, and the electrolyte [1-3].
Light harvesting efficiency (LHE) is one of the main features of DSSC. Several techniques have been done to improve the LHE through the photon absorption such as modification of FTO surface using Argon plasma in a vacuum chamber [4], fabrication of TiO
2nanorods [5] and TiO
2nanofibers [6]. In many cases, high-performance
* Corresponding author.Tel.: +62-271-669017; fax: +62-271-669017.
E-mail address: rsuryana@staff.uns.ac.id
1/13/2020 Materials Today: Proceedings | The 6th International Conference on Advanced Materials Science and Technology 2018(6th ICAMST…
https://www.sciencedirect.com/journal/materials-today-proceedings/vol/13/part/P1 4/8
Research article Full text access
Technical and Economic Analysis of the Usages Glued Laminated of Apus and Petung Bamboo as an Alternative Material Component of Timber Shipbuilding
Parlindungan Manik, Sarjito Joko Sisworo, Good Rindo, Kamal Pages 115-120
Download PDF Article preview
Research article Full text access
Comparison of Strength, Microstructure and Corrosion Resistance of Stainless Steels Type 410 and Type 410-3Mo in Tempered Condition
Efendi Mabruri, Sujianto, Moch. Syaiful Anwar, Toni Bambang Romijarso, ... Dewa Nyoman Adnyana Pages 121-126
Download PDF Article preview
Research article Full text access
Preliminary Study of Smelting of Indonesian Nickel Laterite Ore using an Electric Arc Furnace
Yayat Iman Supriyatna, Iqbal Huda Sihotang, SudibyoPages 127-131
Download PDF Article preview
Research article Full text access
Pipe Blockage Prediction of Shell and Tube Heat Exchanger under Linear and Cross Flow Operation
Wiji Mangestiyono, Sutrisno, Sutrisno, Juli MrihardjonoPages 132-136
Download PDF Article preview
Research article Full text access
Synthesis of Zeolite X Molecular Sieve from Geothermal Solid Waste
Widayat, Hadiyanto, Hantoro Satriadi, Bambang Cahyono, ... Pratika Febrianti Pages 137-142Download PDF Article preview
Research article Full text access
Surface Profile of Polystyrene Film on the QCM sensor Deposited by Ultrasonic Atomizer Spray Coating
Nike Fitayatul Khusnah, Masruroh Masruroh, Dionysius Joseph Djoko Herry Santjojo, Setyawan Purnomo SaktiPages 143-148
Download PDF Article preview
Research article Full text access
Characterization of Latent 3D Laser Photoexposure Patterns in Photoresist Created by Direct Laser Writing
Edy Yulianto, Subhashri Chatterjee, Vygantas MizeikisPages 149-153
Download PDF Article preview
Research article Full text access
The Synthesis of Fiber Membranes from High-Impact Polystyrene (HIPS) Waste using Needleless Electrospinning as Air Filtration Media
Akmal Zulfi, Dian Ahmad Hapidin, Casmika Saputra, Widya Sinta Mustika, ... Khairurrijal Khairurrijal Pages 154-159
Download PDF Article preview
1/13/2020 Materials Today: Proceedings | The 6th International Conference on Advanced Materials Science and Technology 2018(6th ICAMST…
https://www.sciencedirect.com/journal/materials-today-proceedings/vol/13/part/P1 5/8
Research article Full text access
Experimental Study on the Performance of a R-22 Freezer Retrofitted with R-290
Muhammad Edi Pujianto, Berkah Fajar Tamtomo Kiono, Mohamad Said Kartosono Tony Suryo Pages 160-164Download PDF Article preview
Research article Full text access
Facile Preparation of Carbon Nanofiber from Banana Peel Waste
Sherly Novia Sari, Asih MelatiPages 165-168
Download PDF Article preview
Research article Full text access
Integration of the Stimulation TENS and Hot Compress Devices Therapy to Relieve Pain
Joni Karmani, Munadi Munadi, Joga Dharma Setiawan, Susilo Adi Widyanto, Paryanto ParyantoPages 169-174
Download PDF Article preview
Research article Open access
The Effect of Time Deposition of PAN/TiO Electrospun on Photocurrent Performance of Dye-Sensitized Solar Cell
Ulwiyatus Sa'adah, Siti Wihdatul Himmah, Thathit Suprayogi, Markus Diantoro, ... Nasikhudin NasikhudinPages 175-180
Download PDF Article preview
Research article Full text access
The Effect of Reduced Graphene Oxide on the Activated Carbon Metal Oxide Supercapacitor
Harsojo, Maryati Doloksaribu, Bambang Prihandoko, Slamet Priyono, ... Titik LestariningsihPages 181-186
Download PDF Article preview
Research article Full text access
The Synthesis and Characterization of Composite Electrospun Fibers of Polyvinylpyrrolidone and Shell Extract of Melinjo (Gnetum gnemon L.)
Gian Prahasti, Dhewa Edikresnha, Yulianto Agung Rezeki, Muhammad Miftahul Munir, Khairurrijal Khairurrijal Pages 187-192
Download PDF Article preview
Research article Full text access
Effect of Immersion Cycle on Photoelectrochemical Properties of Cu O Thin Films on Stainless Steel Substrate Prepared by Chemical Bath Deposition Method
Nandang Mufti, M Tommy Hasan Abadi, Atsnaita Yasrina, Sunaryono, ... Yudyanto Pages 193-198
Download PDF Article preview
Research article Full text access
Synthesis and Characterization of Electrospinning PVA Nanofiber-Crosslinked by Glutaraldehyde
Mentik Hulupi, Haryadi HaryadiPages 199-204
Download PDF Article preview
Research article Full text access
2
2
1/13/2020 Materials Today: Proceedings | The 6th International Conference on Advanced Materials Science and Technology 2018(6th ICAMST…
https://www.sciencedirect.com/journal/materials-today-proceedings/vol/13/part/P1 6/8
The Influence of Immerse Times PbI in CH NH I Solutions on Microstructure and Perovskite Solar Cell Performance
Siti Maryam, Rifqiyatun Saidah, Nandang Mufti, Sunaryono Sunaryono, Abdulloh FuadPages 205-210
Download PDF Article preview
Research article Full text access
Fabrication of Aligned PAN/TiO Fiber using Electric Electrospinning (EES)
Titik Istirohah, Siti Wihdatul Himmah, Markus DiantoroPages 211-216
Download PDF Article preview
Research article Full text access
Incorporation of Nanoparticles as Antifouling Agents into PES UF Membrane
Heru Susanto, Ria Desiriani, Aryo Adi Prasetyo, Dyahtantri Hermita, ... I Nyoman Widiasa Pages 217-223Download PDF Article preview
Research article Full text access
The Effect of Solution Treatment on Microstructure and Mechanical Properties of Ti-6Mo-6Nb-8Sn Alloy
Galih Senopati, Cahya Sutowo, Ika Kartika, Bambang SuharnoPages 224-228
Download PDF Article preview
Research article Full text access
The Effect of Ni on Mechanical Properties and Austempered Microstructure Developments in Cold Rolled Low Carbon Fe- Ni Lateritic Steels
Muhammad Yunan Hasbi, Fatayalkadri Citrawati, Myrna Ariati Pages 229-234
Download PDF Article preview
Research article Full text access
High-temperature Oxidation Resistance of Martensitic Stainless Steel 13Cr3Mo3Ni-cast after Heat Treated
Mochammad Syaiful Anwar, Septian Adi Chandra, Rahma Nisa Hakim, Siska Prifiharni, ... Efendi MabruriPages 235-240
Download PDF Article preview
Research article Full text access
Temperature-Induced on the Phase Formation and Its Microstructure of LiNiPO /C Cathode Materials for Lithium-Ion Batteries
Anggun Amalia Fibriyanti, Wiwin Astutik, Abdulloh Fuad, Bambang Prihandoko, ... Markus Diantoro Pages 241-245
Download PDF Article preview
Research article Full text access
Natural Dye of Musa acuminata bracts as Light Absorbing Sensitizer for Dye-Sensitized Solar Cell
Sutikno Madnasri, Rieza Dwi Ayu Wulandari, Syaikhul Hadi, Ian Yulianti, ... Dhidik PrastiyantoPages 246-251
Download PDF Article preview
Research article Full text access
Applying Pulse Height Analysis (PHA) Technique on an Optical Particle Counter (OPC) using Commercial ADC Module
Dian Ahmad Hapidin, Widya Sinta Mustika, Casmika Saputra, Dian Syah Maulana, ... Muhammad Miftahul Munir2 3 3
2
4
1/13/2020 Materials Today: Proceedings | The 6th International Conference on Advanced Materials Science and Technology 2018(6th ICAMST…
https://www.sciencedirect.com/journal/materials-today-proceedings/vol/13/part/P1 7/8
Pages 252-257
Download PDF Article preview
Research article Full text access
Study on Morphology and Crystal Structure of Pd Doped Nd FeO
Eko Hadi Sujiono, Vicran Zharvan, Muhammad Yusriadi Dahlan, Andi Chaerunnisa Mugni Said, ... Samnur Pages 258-263
Download PDF Article preview
Research article Full text access
Nd(Fe) Ba Cu O Oxide Material Crystal Structure and Morphological Analysis
Eko Hadi Sujiono, Awalia Husnul Khatimah, Aisyah Nur Hasanah, Nurul Fitriyah Mahendi, ... Andi Irhamsyah Pages 264-269
Download PDF Article preview
Research article Full text access
Study of Craters Morphology and Projectile Deformation from Ballistic Tests using Firearms on the Body Plate of Vehicle
Happy Riyono, Agus Suprihanto, Sulistyo, RusnaldyPages 270-275
Download PDF Article preview
Research article Full text access
Preparation and Characterization of High Flux Polypropylene Microfiltration Membrane via Non-Solvent Induced Phase Separation
Heru Susanto, I.F. Abdullah Malik, Sonya Hakim Raharjo, Muhammad Nur Pages 276-280
Download PDF Article preview
Research article Full text access
Integration of Redox Polymerization into Phase Inversion Processes for the Non-Fouling Membrane Preparation
Heru Susanto, Dwi Titik Apriyanti, Bernard Timothy, Elfira Rizka Alfarani, Titik IstirokhatunPages 281-286
Download PDF Article preview
Research article Full text access
The Morphology Aspect of CaCO Scale Impact of Solenoid Magnetic Field in the Various Flow Rate Solution in the Piping System
Sutomo Sutomo, Stefanus Muryanto, Wiji Mangestiono, Jamari Jamari, Athanasius Priharyoto Bayuseno Pages 287-292
Download PDF Article preview
Research article Full text access
Stress Analysis of the Friction Contact on filled Styrene Butadiene Rubber by a Blade Indentation: A Numerical Investigation
Budi Setiyana, Jamari Jamari, Sugiyanto, Dirk Jan Schipper Pages 293-298
Download PDF Article preview
Research article Full text access
The Kinetic Aspect of CaCO Scale Formation in the Solenoid Magnetic Field in the Various Temperatures of Solution in Piping System
1.2 3
0.3 1.7 3 7-δ
3
3
Available online at www.sciencedirect.com
ScienceDirect
Materials Today: Proceedings 13 (2019) 293–298 www.materialstoday.com/proceedings
2214-7853 © 2019 Elsevier Ltd. All rights reserved.
Peer-review under responsibility of the scientific committee of The 6th International Conference on Advanced Materials Science and Technology 2018, 6th ICAMST.
ICAMST 2018
Stress Analysis of the Friction Contact on filled Styrene Butadiene Rubber by a Blade Indentation: A Numerical Investigation
Budi Setiyana
a,b,*, Jamari Jamari
a, Sugiyanto
a, Dirk Jan Schipper
baLaboratory for Engineering Design and Tribology, Department of Mechanical Engineering, University of Diponegoro, Jl. Prof. Soedharto, Tembalang, Semarang 59275, Indonesia
bLaboratory for Surface Technology and Tribology, Faculty of Engineering Technology, University of Twente, Drienerloolaan 5, Postbus 217, 7500 AE Enschede, Dutch (Netherlands)
Abstract
The occurrence of rubber abrasion is started with a crack that occurs when maximum stress exceeds the breaking stress.
Investigation of the rubber friction using a blade indenter is presented numerically in this paper. The rubber analyzed was Filled Styrene Butadiene Rubber that is commonly used for tires. The analysis was performed to obtain the stress pattern and maximum stress location of the deformed rubber. Simulation results showed that the magnitude and location of the maximum stress were strongly influenced by the depth of indentation and contact surface roughness.
© 2019 Elsevier Ltd. All rights reserved.
Peer-review under responsibility of the scientific committee of The 6th International Conference on Advanced Materials Science and Technology 2018, 6th ICAMST.
Keywords: abrasion; blade indenter; friction; rubber; stress
1. Introduction
Elastomers or rubbers are used extensively because of their wide availability and low cost. Rubber is a very unique material. The unique properties of rubber are such that, it can undergo large deformations under load, sustaining large strains in engineering applications.
* Corresponding author. Tel.: +62-24-7460059; fax: +62-24-7460059.
E-mail address: b_setiyana@undip.ac.id
1/13/2020 Materials Today: Proceedings | The 6th International Conference on Advanced Materials Science and Technology 2018(6th ICAMST…
https://www.sciencedirect.com/journal/materials-today-proceedings/vol/13/part/P1 8/8
Sutomo Sutomo, Stefanus Muryanto, Wiji Mangestiono, Jamari Jamari, Athanasius Priharyoto Bayuseno Pages 299-304
Download PDF Article preview
Research article Full text access
Simulation Load Parameter on Bipolar Artificial Hip Joint Using Finite Element Method (FEM)
Reza Azizul Nasa Al Hakim, Ahmad Edwan, Jamari Jamari, Rifky Ismail, ... Sakuri DahlanPages 305-310
Download PDF Article preview
Research article Full text access
Performance Stability and Optical Properties of Musa Acuminata bracts-based Dye-Sensitized Solar Cell
Sutikno Madnasri, Syaikhul Hadi, Rieza Dwi Ayu Wulandari, Ian Yulianti, ... Dhidik PrastiyantoPages 311-316
Download PDF Article preview
ISSN: 2214-7853
Copyright © 2020 Elsevier Ltd. All rights reserved
About ScienceDirect Remote access Shopping cart Advertise Contact and support Terms and conditions Privacy policy We use cookies to help provide and enhance our service and tailor content and ads. By continuing you agree to the use of cookies.
Copyright © 2020 Elsevier B.V. or its licensors or contributors. ScienceDirect ® is a registered trademark of Elsevier B.V.
ScienceDirect ® is a registered trademark of Elsevier B.V.
1/13/2020 Organizing Committee - ICAMST 2018
kosatem.org/icamst2018/organizing-committee/ 1/3
ICAMST 2018
(http://kosatem.org/icamst2018/)
The International Conference on Advanced Materials Science and Technology 2018
icamst2018@kosatem.org (mailto:icamst2018@kosatem.org)
+6282135243883 (tel:+6282135243883) (tel:#)
Organizing Committee
Home (http://kosatem.org/icamst2018) / Organizing Committee
March 23, 2018
(http://kosatem.org/icamst2018/organizing-0 committee/#respond)
Organizing Committee
Scienti c Commitee : Kuwat Triyana, UGM, Indonesia Michikazu Hara, Tokyo Institute of Technology
Abdul Latif Ahmad, Universiti Sains Malaysia
*)Seiichi Miyazaki, Nagoya University, Japan Ariando, NUS, Singapore
*)Mohamad Deraman, UKM, Malaysia Risa Suryana, UNS, Indonesia Mikrajuddin Abdullah, ITB, Indonesia
Amun Amri, UNRI, Indonesia Darminto, ITS, Indonesia
*)Didier Fasquelle, ULCO, France Hadi Nur, UTM, Malaysia
Chairman : Heru Susanto, Undip, Indonesia
Co-Chairmen : Khairurrijal, ITB, Indonesia Eko Hadi Sujiono, UNM, Indonesia
Sutikno, UNNES, Indonesia Markus Diantoro, UM, Indonesia
« Abstract Submission (http://kosatem.org/icamst2018/abstract-submission/) Conference Venue (http://kosatem.org/icamst2018/conference-venue/) »
Leave a Reply
Category :
ICAMST 2018 (http://kosatem.org/icamst2018/category/icamst-2
0 organized by 9 t �JO th October 2018
Novotel Hotel, Semarang, Indonesia JJthOc t obe r 2018: Workshop
Consortium of Materials Science and
Technology (KoSoTeM) and Materials Research
Society of I ndonesio (MRS-Id) 0 plenary speakers
G\) important dates
Abstract submission : August 20, 2018 Abstract acceptance notification: August 22, 2018 Full paper submission : October 2, 2018 Event Rundown Distribution : October 3, 2018 Conference : October 9-10, 2.018
(i) topics
Nano Scie nc e an d T echnology
Nonomoterials Nanostructures Nano-Complex Materials
Devices
Electronics, pholonics
Mi1era ls and Complex Materials
Geopolymer Natural Polymer Conducting Polymer Metal-Organics Materials Hybrid and Complex Moleriols Minerals Science and Technology
Michikazu Hara
Tokyo Institute of Technology, Jo pan
Abdul Latif Ahma d•)
Universi Ii Sa ins Malaysia, Malays i a
•) lo be confirmed
Sutikno
Universitas Negeri Semarang
Functio n al M ater ia l s
Dielectric Materials Magnetic Materials Pholonic Materials Materials For Energy
Multiforroics
Exotk Ma1erlals lntermetallic Compounds Low Dimensional Systems Graphene Related Materials
Sy nthesis and Characterization Techn ique s Theoretical and A nalysis In M aterlals ' Low Tem perature Physics Materiols Instrumentation
Novel Synthesis Methods Characterization Methods
G registration
T heoretical Material Science Computational Material Science
Ouontum Dots Topological Order
• • / Early Bid Rate Normal Rate Befo r e August 30.2018 Aug 3 1 . 2018 • Ocl 5. 2018
International Non Student Non Student
With Paper USO 300 USO 350
Without Paper USO 75 USO 50 USO 75 Extra One Paper USO 150 USO 150 USO 150
Local/domestic Non Student Student Non Student With Paper IDR 3,000.000 IDR2.000 .. 000 IDR 3,500,000
Without Paper IDR 750,000 IDR 500,000 IDR 750,000
Extra One Paper IDR 1,500,000 IDR 1.500.000 IDR 1,500,000
Publishers (selected papers)
� Scientific Journal indexed by: ISi Thomson-Reuters, Scopus, SJR
Rf Conference Proceeding Indexed by Scapus
more information and re istrati on:
Student US0250 U5050 USO 150
Student
IDR 2,500,000 IDRS00,000 IDR 1.500,000
Low Temperature Materials
Superconductor and Superconductivity Superfluidity
Vortex System
in collaboration with 9
MR <:; - � 6) ��. '.'. i�- ,,. , ., 7' : A 1 :,,1' ;, ;�l� .. r � ·-
• v . ... =.ii< \RI�
/4
'=