Page 92 of 96
Rahayu Budi Prahara
Optimization Electrical Current of the S pot TIG Welding on the Tensile S trength of Material Mild S teel S PCG 250 using Fuzzy Logic Method
REFERENCES
Abbass, M. and Kadhim, S. (2016) ‘Optimization and Predication of Spot TIG Welding Parameters of Stainless Steel Sheets ( AISI 304L )’, (November). doi:
10.15680/IJIRSET.2016.0511004.
Alenius, M. et al. (2006) ‘Exploring the mechanical properties of spot welded dissimilar joints for stainless and galvanized steels’, Welding Journal (Miami, Fla), 85(12).
ASM Metals Handbook (1993) ‘ASM Metals Handbook, Vol 06 Welding, Brazing, and Soldering’, ASM Metals Handbook, 6, pp. 81–2873. doi:
10.1016/0042-207X(89)90271-6.
Ata, R. and Kocyigit, Y. (2010) ‘An adaptive neuro-fuzzy inference system approach for prediction of tip speed ratio in wind turbines’, Expert Systems with Applications. Elsevier Ltd, 37(7), pp. 5454–5460. doi:
10.1016/j.eswa.2010.02.068.
Azizah, N., Adi, K. and Widodo, A. (2016) ‘Metode Adaptive Neuro Fuzzy Inference System (ANFIS) untuk Prediksi Tingkat Layanan Jalan’, Jurnal Sistem Informasi Bisnis, 3(3), pp. 127–131. doi: 10.21456/vol3iss3pp.
Balasubramanian, M., Jayabalan, V. and Balasubramanian, V. (2007) ‘Process optimisation of PCTIG welding of titanium alloy using the modified Taguchi method’, International Journal of Manufacturing Research, 2(4), pp. 403–413.
doi: 10.1504/IJMR.2007.015085.
Boriwal, L., Sarviya, R. M. and Mahapatra, M. M. (2017) ‘Fuzzy logic based modeling for Resistance Spot Welding Process’, Materials Today: Proceedings, 4(8), pp. 8176–8184. doi: 10.1016/j.matpr.2017.07.159.
Brien, A. O. (1969) Welding Handbook, Welding Handbook. doi: 10.1007/978-1- 349-00324-2.
Daihen (2002) ACCUTIG 300P.
Eisazadeh, H., Haines, D. J. and Torabizadeh, M. (2014) ‘Effects of gravity on mechanical properties of GTA welded joints’, Journal of Materials Processing Technology. Elsevier B.V., 214(5), pp. 1136–1142. doi:
10.1016/j.jmatprotec.2014.01.002.
Page 93 of 96
Rahayu Budi Prahara
Optimization Electrical Current of the S pot TIG Welding on the Tensile S trength of Material Mild S teel S PCG 250 using Fuzzy Logic Method
Faozi, S. (2015) ‘Pengaruh Arus Listrik dan Holding Time terhadap Sifat Fisik- Mekanik Sambungan Spot Tig Welding Material Tak Sejenis antara Baja dan Paduan Aluminium’. UNS (Sebelas Maret University).
Handra, N. (2014) ‘Pengaruh waktu tekan dan hasil gumpalan terhadap kekuatan geser pada las titik’, 4(1), pp. 37–42.
Herwanto, H. W., Widiyaningtyas, T. and Indriana, P. (2019) ‘Penerapan
Algoritme Linear Regression untuk Prediksi Hasil Panen Tanaman Padi’, Jurnal Nasional Teknik Elektro dan Teknologi Informasi (JNTETI), 8(4), p. 364. doi:
10.22146/jnteti.v8i4.537.
Hussein, H. K., Shareef, I. R. and Zayer, I. A. (2019) ‘Prediction of spot welding parameters using fuzzy logic controlling’, Eastern-European Journal of
Enterprise Technologies, 5(2–101), pp. 57–64. doi: 10.15587/1729- 4061.2019.172642.
Jenney, C. L. and O’Brien, A. (1991) Welding handbook-II part I, American Welding Society.
Jeyaprakash, N., Haile, A. and Arunprasath, M. (2015) ‘The parameters and equipments used in TIG welding: A review’, The International Journal of Engineering and Science (IJES), 4(2), pp. 11–20.
Lee, S. R. et al. (2001) ‘A quality assurance technique for resistance spot welding using a neuro-fuzzy algorithm’, Journal of Manufacturing Systems, 20(5), pp.
320–328. doi: 10.1016/S0278-6125(01)80051-0.
Narang, H. et al. (2012) ‘Prediction of the weld pool geometry of TIG arc welding by using fuzzy logic controller’, International Journal of Engineering, Science and Technology, 3(9), pp. 77–85. doi: 10.4314/ijest.v3i9.6.
Nasution, H. (2007) ‘Energy Analisis of Air Conditioning System using PID and Fuzzy Logic Controllers’, BMC Public Health, 5(1), pp. 1–8. Available at:
https://ejournal.poltektegal.ac.id/index.php/siklus/article/view/298%0Ahttp://repo sitorio.unan.edu.ni/2986/1/5624.pdf%0Ahttp://dx.doi.org/10.1016/j.jana.2015.10.
005%0Ahttp://www.biomedcentral.com/1471-
2458/12/58%0Ahttp://ovidsp.ovid.com/ovidweb.cgi?T=JS&P.
Pal, S. et al. (2009) ‘Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method’, International
Page 94 of 96
Rahayu Budi Prahara
Optimization Electrical Current of the S pot TIG Welding on the Tensile S trength of Material Mild S teel S PCG 250 using Fuzzy Logic Method
Journal of Advanced Manufacturing Technology, 44(11–12), pp. 1250–1260. doi:
10.1007/s00170-009-1931-0.
Parmar, H. and Nair, V. (2019) ‘Review on Investigate the TIG Welding of Aluminum by Controlling Parameter’, International Research Journal of Engineering and Technology (IRJET), (March), pp. 349–354.
Patel, N. S. (2014) ‘A Review on Parametric Optimization of Tig Welding Naitik S Patel , 2 Prof . Rahul B Patel’, pp. 27–31.
Raut, M. and Achwal, V. (2014) ‘Optimization of spot welding process parameters for maximum tensile shear strength’, International Journal of Mechanical Engineering and Robotics Research, 3(4), pp. 506–517.
Reddy, G. C. M. (2020) ‘Design and Development of a Fuzzy Logic Controller for Prediction of TIG welded Al-65032 Specimens’, The International journal of analytical and experimental modal analysis, XII(0886), pp. 445–448.
Sanuri Ebru Prasetyo, Triyono, N. M. (2016) ‘PENGARUH KUAT ARUS LISTRIK DAN LAJU ALIR GAS PELINDUNG TERHADAP STRUKTUR MIKRO DAN KEKUATAN TARIK-GESER SAMBUNGAN LAS TIG LOGAM TAK SEJENIS ALUMUNIUM PADUAN 5052-BAJA GALVANIS DENGAN FILER Al-Si 404. Jurusan Teknik Mesin – Universitas Sebelas Maret’, Mekanika, 15, p. 1.
Sari, S., Tarno and Safitri, D. (2017) ‘Pemilihan input model regression adaptive neuro fuzzy inference system (ranfis) untuk kajian data ihsg 1’, Jurnal Gaussian, 6(3), pp. 449–458.
Sharma, S., Taiwade, R. V. and Vashishtha, H. (2017) ‘Effect of Continuous and Pulsed Current Gas Tungsten Arc Welding on Dissimilar Weldments Between Hastelloy C-276/AISI 321 Austenitic Stainless Steel’, Journal of Materials Engineering and Performance. Springer US, 26(3), pp. 1146–1157. doi:
10.1007/s11665-017-2570-5.
Shimadzu (no date) ‘Autograph AGS-X Series’.
Standard Test Methods for Tension Testing of Metallic Materials (2004) ‘Astm E8-04’, i, pp. 1–24. Available at: www.astm.org.
Steel, P. K. (2018) ‘Krakatau Steel, Product Spec Mix - Convert’, pp. 5–31.
Tseng, K. H. and Chuang, K. J. (2012) ‘Application of iron-based powders in
Page 95 of 96
Rahayu Budi Prahara
Optimization Electrical Current of the S pot TIG Welding on the Tensile S trength of Material Mild S teel S PCG 250 using Fuzzy Logic Method
tungsten inert gas welding for 17Cr-10Ni-2Mo alloys’, Powder Technology.
Elsevier B.V., 228, pp. 36–46. doi: 10.1016/j.powtec.2012.04.047.
Vishnuvaradhan, S. et al. (2013) ‘Intelligent modeling using adaptive neuro fuzzy inference system (ANFIS) for predicting weld bead shape parameters during A- TIG welding of reduced activation ferritic- martensitic (RAFM) steel’,
Transactions of the Indian Institute of Metals, 66(1), pp. 57–63. doi:
10.1007/s12666-012-0178-x.
Wang, C. (2015) ‘A Study of Membership Functions on Mamdani-Type Fuzzy Inference System for Industrial Decision-Making’, Theses and Dissertations.
Wang, H. et al. (2017) ‘Effect of duty cycle on microstructure and mechanical properties of pulsed GTAW lap joint of Invar’, Journal of Materials Processing Technology. Elsevier B.V., 243, pp. 481–488. doi:
10.1016/j.jmatprotec.2017.01.008.
