Document details
References (34)
1 of 1
Optimization of CNC milling parameters through the Taguchi and RSM methods for surface roughness of UHMWPE acetabular cup
(Article), , , ,
Diponegoro University, Faculty of Engineering, Department of Mechanical Engineering, Jl. Prof. Soedarto, Semarang, 50275, Indonesia
University of Atma Jaya Yogyakarta, Faculty of Industrial Technology, Department of Industrial Engineering, Jl.
Babarsari 44, Yogyakarta, 55281, Indonesia
Abstract
CNC milling is a flexible technology for machining UHMWPE with low machinability. This study was undertaken for modeling of the experimental data with CNC milling parameters (spindle speed, feed rate, and step over) against the response of surface roughness of UHMWPE acetabular cup. Here the significant machining parameters on the surface roughness were first analysed by ANOVA, while the optimized parameters for yielding the minimum surface
roughness were determined with the Taguchi method and the Response Surface Methodology (RSM). In the milling of UHMWPE acetabular cup, the method was confirmed valid for optimizing the cutting parameters with the minimal surface roughness. Accordingly, the minimum surface roughness determined by the Taguchi method could
correspond to the optimum levels of spindle speed of 6500 rpm, the feed rate of 1500 mm/rev and step over about 0.1 mm. The Taguchi and RSM based models yielded the consistent results, hereby justifying their suitability. In
conclusion, the examination by statistical indicators confirmed the acceptability of these examples. © IAEME Publication.
SciVal Topic Prominence
Topic:
Prominence percentile: 98.760
Author keywords
Cutting parameters RSM Surface roughness Taguchi method UHMWPE acetabular cup
Kurtz, S.M.
(2015) Ultra-High Molecular Weight Polyethylene in Total Joint Replacement and Medical Devices.
.
Third Edit. Matthew Deans
◅ Back to results
Export
Download
Print
E-mail
Save to PDF⋆
Add to List More...▻
International Journal of Mechanical Engineering and Technology Volume 10, Issue 2, February 2019, Pages 1762-1775
Lestari, W.D.a Ismail, R.a Jamari, J.a Bayuseno, A.P.a Anggoro, P.W.b
a
b
View references (34)
Cutting Force | Carbide Tools | Inconel (Trademark)
ISSN: 09766340 Source Type: Journal Original language: English
Document Type: Article Publisher: IAEME Publication
▻ View in search results format All Export
Print
E-mail
Save to PDF Create bibliography1
Cited 3 times
PlumX Metrics
Usage, Captures, Mentions, Social Media and Citations beyond Scopus.
Metrics
1
Citation in Scopus38th percentile
0.19
Field-Weighted Citation ImpactCited by 1 document
, ,
(2020) ASME 2020 15th International Manufacturing Science and Engineering Conference, MSEC 2020
Inform me when this document is cited in Scopus:
Related documents
, ,
(2020) ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
❓
View all metrics ▻
Prediction and optimization of surface roughness and cutting force in turning of uhmwpe by using taguchi method, response surface methodology and neural networks
Susac, F. Stan, F. Fetecau, C.
View details of this citation
Set citation alert ▻
Study of the cutting parameters on surface roughness and material removal rate in hard turning of UHMWPE Aguilera-Ojeda, C.O. Saldaña- Robles, A. Vidal-Lesso, A.
Influence of Coating Material and Cutting Parameters on Surface Roughness and Material Removal Rate in Turning Process Using Taguchi Method
Brought to you by Universitas Diponegoro
Search Sources Lists SciVal ↗ Create account Sign in
Lucas, A.D.A., Ambrósio, J.D., Otaguro, H., Costa, L.C., Agnelli, J.A.M.
(2011) Wear, 270 (9-10), pp. 576-583. . doi: 10.1016/j.wear.2011.01.011
Harris, W.H.
(1995) Clinical Orthopaedics and Related Research, (311), pp. 46-53. .
Elfick, A.P.D., Green, S.M., Krikler, S., Unsworth, A.
(2003) Journal of Biomedical Materials Research - Part A, 65 (1), pp. 95-108. . doi: 10.1002/jbm.a.10455
Jagtap, T.U., Mandave, H.A.
Machining of plastics: A review
(2015) Int. J. Eng. Res. Gen. Sci.., 3 (2), pp. 577-581. .
Keresztes, R., Kalácska, G., Zsidai, L., Dobrocsi, Z.
Machinability of engineering polymers
(2011) Sustain. Constr. Des.., pp. 106-114. .
Kaddeche, M., Chaoui, K., Yallese, M.A.
(Open Access) (2012) Mechanics and Industry, 13 (5), pp. 307-316. .
doi: 10.1051/meca/2012029
Xiao, K.Q., Zhang, L.C.
(2002) International Journal of Mechanical Sciences, 44 (11), pp. 2317-2336. . doi: 10.1016/S0020-7403(02)00178-9
Asiltürk, I., Çunkaş, M.
(2011) Expert Systems with Applications, 38 (5), pp. 5826-5832. . doi: 10.1016/j.eswa.2010.11.041
2
Abrasive wear of HDPE/UHMWPE blends
Cited 58 times
View at Publisher
3
The problem is osteolysis
Cited 678 times https://journals.lww.com/clinorthop/pages/default.aspx
4
The nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR
Cited 55 times http://onlinelibrary.wiley.com/journal/10.1002/(ISSN)1552-4965
View at Publisher
5
Cited 10 times
6
Cited 11 times
7
Cutting parameters effects on the machining of two high density polyethylene pipes resins: Cutting parameters effects on HDPE machining
Cited 13 times
View at Publisher
8
The role of viscous deformation in the machining of polymers
Cited 68 times
View at Publisher
9
Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method
Cited 227 times
View at Publisher
, ,
(2018) Materials Today:
Proceedings
,
(2019) Journal of Physics:
Conference Series
Find more related documents in Scopus based on:
Moganapriya, C. Rajasekar, R.
Ponappa, K.
Selection of optimum Cutting Parameters for Minimization of Specific Energy Consumption during Machining of Al 6061 Pawanr, S. Garg, G.K.
View all related documents based on references
▻
Authors Keywords ▻
Özel, T., Karpat, Y.
(2005) International Journal of Machine Tools and Manufacture, 45 (4-5), pp. 467-479. . doi: 10.1016/j.ijmachtools.2004.09.007
Wang, M.-Y., Chang, H.-Y.
(2004) International Journal of Machine Tools and Manufacture, 44 (1), pp. 51-57. . doi: 10.1016/j.ijmachtools.2003.08.011
Fetecau, C., Stan, F.
(2012) Measurement: Journal of the International Measurement Confederation, 45 (6), pp. 1367-1379.
.
doi: 10.1016/j.measurement.2012.03.030
Seeman, M., Ganesan, G., Karthikeyan, R., Velayudham, A.
(2010) International Journal of Advanced Manufacturing Technology, 48 (5-8), pp. 613-624. . doi: 10.1007/s00170-009-2297-z
Quigley, O., Monaghan, J., O'Reilly, P.
(1994) Journal of Materials Processing Tech., 43 (1), pp. 21-36. . doi: 10.1016/0924-0136(94)90159-7
Sahin, Y., Kok, M., Celik, H.
(2002) Journal of Materials Processing Technology, 128 (1-3), pp. 280-291. . doi: 10.1016/S0924-0136(02)00467-3
Unnikrishna Pillai, J., Sanghrajka, I., Shunmugavel, M., Muthuramalingam, T., Goldberg, M., Littlefair, G.
(2018) Measurement: Journal of the International Measurement Confederation, 124, pp. 291-298.
.
doi: 10.1016/j.measurement.2018.04.052 10
Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks
Cited 462 times
View at Publisher
11
Experimental study of surface roughness in slot end milling AL2014-T6
Cited 114 times
View at Publisher
12
Study of cutting force and surface roughness in the turning of polytetrafluoroethylene composites with a polycrystalline diamond tool
Cited 46 times
View at Publisher
13
Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach
Cited 129 times
View at Publisher
14
Factors affecting the machinability of an Al/SiC metal-matrix composite
Cited 80 times
View at Publisher
15
Tool wear and surface roughness of Al O particle-reinforced aluminium alloy
composites
2 3Cited 108 times
View at Publisher
16
Optimisation of multiple response characteristics on end milling of aluminium alloy using Taguchi-Grey relational approach
Cited 34 times
View at Publisher
Asiltürk, I., Neşeli, S.
(2012) Measurement: Journal of the International Measurement Confederation, 45 (4), pp. 785-794.
.
doi: 10.1016/j.measurement.2011.12.004
Mia, M.
(2018) Measurement: Journal of the International Measurement Confederation, 121, pp. 249-260.
.
doi: 10.1016/j.measurement.2018.02.017
Das, B., Roy, S., Rai, R.N., Saha, S.C.
(Open Access)
(2016) Engineering Science and Technology, an International Journal, 19 (2), pp. 857-865. . doi: 10.1016/j.jestch.2015.12.002
Kivak, T.
(2014) Measurement: Journal of the International Measurement Confederation, 50 (1), pp. 19-28.
.
doi: 10.1016/j.measurement.2013.12.017
Rajeswari, B., Amirthagadeswaran, K.S.
(2017) Measurement: Journal of the International Measurement Confederation, 105, pp. 78-86.
.
doi: 10.1016/j.measurement.2017.04.014
Bolar, G., Das, A., Joshi, S.N.
(2018) Measurement: Journal of the International Measurement Confederation, 121, pp. 190-204.
.
doi: 10.1016/j.measurement.2018.02.015
Yan, J., Li, L.
(2013) Journal of Cleaner Production, 52, pp. 462-471. . doi: 10.1016/j.jclepro.2013.02.030
17
Multi response optimisation of CNC turning parameters via Taguchi method-based response surface analysis
Cited 175 times
View at Publisher
18
Mathematical modeling and optimization of MQL assisted end milling characteristics based on RSM and Taguchi method
Cited 41 times
View at Publisher
19
Application of grey fuzzy logic for the optimization of CNC milling parameters for Al–
4.5%Cu–TiC MMCs with multi-performance characteristics
Cited 42 times www.journals.elsevier.com/engineering-science-and-technology-an-international-journal/
View at Publisher
20
Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts
Cited 174 times
View at Publisher
21
Experimental investigation of machinability characteristics and multi-response optimization of end milling in aluminium composites using RSM based grey relational analysis
Cited 43 times
View at Publisher
22
Measurement and analysis of cutting force and product surface quality during end- milling of thin-wall components
Cited 39 times
View at Publisher
23
Multi-objective optimization of milling parameters-the trade-offs between energy, production rate and cutting quality
Cited 224 times
View at Publisher
Chabbi, A., Yallese, M.A., Nouioua, M., Meddour, I., Mabrouki, T., Girardin, F.
(2017) International Journal of Advanced Manufacturing Technology, 91 (5-8), pp. 2267-2290.
.
doi: 10.1007/s00170-016-9858-8
Camposeco-Negrete, C.
(2013) Journal of Cleaner Production, 53, pp. 195-203. . doi: 10.1016/j.jclepro.2013.03.049
Yadav, R.N.
A hybrid approach of Taguchi-response surface methodology for modeling and optimization of duplex turning process
(2016) Measurement
Muthuramalingam, T., Mohan, B.
(2014) Measurement: Journal of the International Measurement Confederation, 58, pp. 495-502.
.
doi: 10.1016/j.measurement.2014.09.029
Lalwani, D.I., Mehta, N.K., Jain, P.K.
(2008) Journal of Materials Processing Technology, 206 (1-3), pp. 167-179. . doi: 10.1016/j.jmatprotec.2007.12.018
Phadke, M.S.
(1989) Quality Engineering Using Robust Design. .
Asiltürk, I., Akkuş, H.
(2011) Measurement: Journal of the International Measurement Confederation, 44 (9), pp. 1697-1704.
.
doi: 10.1016/j.measurement.2011.07.003 24
Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods
Cited 33 times
http://www.springerlink.com/content/0268-3768
View at Publisher
25
Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA
Cited 184 times
View at Publisher
26
27
Application of Taguchi-grey multi responses optimization on process parameters in electro erosion
Cited 54 times
View at Publisher
28
Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel
Cited 288 times
View at Publisher
29
Cited 3651 times
30
Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method
Cited 272 times
View at Publisher
1 of 1
Shetty, R., Pai, R.B., Rao, S.S., Nayak, R.
(Open Access) (2009) Journal of the Brazilian Society of Mechanical Sciences and Engineering, 31 (1), pp. 12-20.
.
doi: 10.1590/S1678-58782009000100003
Mia, M., Khan, M.A., Rahman, S.S., Dhar, N.R.
(2017) International Journal of Advanced Manufacturing Technology, 90 (1-4), pp. 109-118. . doi: 10.1007/s00170-016-9372-z
Mia, M., Dhar, N.R.
(2017) International Journal of Advanced Manufacturing Technology, 88 (1-4), pp. 739-753. . doi: 10.1007/s00170-016-8810-2
Aggarwal, A., Singh, H., Kumar, P., Singh, M.
(2008) Journal of Materials Processing Technology, 200 (1-3), pp. 373-384. . doi: 10.1016/j.jmatprotec.2007.09.041
© Copyright 2019 Elsevier B.V., All rights reserved.
31
Taguchi's technique in machining of metal matrix composites
Cited 37 times
http://www.scielo.br/pdf/jbsmse/v31n1/v31n1a03.pdf
View at Publisher
32
Mono-objective and multi-objective optimization of performance parameters in high pressure coolant assisted turning of Ti-6Al-4V
Cited 46 times http://www.springerlink.com/content/0268-3768
View at Publisher
33
Optimization of surface roughness and cutting temperature in high-pressure coolant- assisted hard turning using Taguchi method
Cited 80 times http://www.springerlink.com/content/0268-3768
View at Publisher
34
Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique-A comparative analysis
Cited 192 times
View at Publisher
◅ Back to results Top of page
About Scopus
What is Scopus Content coverage Scopus blog Scopus API Privacy matters
Language
⽇本語に切り替える 切换到简体中文 切換到繁體中文 Русский язык
Customer Service
Help Contact us
Copyright © . All rights reserved. Scopus® is a registered trademark of Elsevier B.V.
We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the .
Terms and conditions ↗ Privacy policy ↗ Elsevier B.V ↗
use of cookies
4/7/2021 International Journal of Mechanical Engineering & Technology (IJMET), Journal Impact Factor (2016)=9.2286, Scopus Indexed Journ…
www.iaeme.com/Ijmet/index.asp 3/5
EDITORIAL BOARD
Chief Editor
Dr. Ajeet Kumar Rai SSET, SHIATS-DU, Allahabad Managing Editors
Dr. Mohammad Israr Principal, Balaji Engineering College, Gujarat Dr. M.Narayana Rao Shri Sapthagiri Institute Of Technology,Chennai Dr. G. Arthanareeswaran NIT Trichy, India
Associate Editors
Dr. V.Antony Joe Raja Sri Muthukumaran Institute of Technology, India Prof. B. Arthi Gandhimathi IAEME Publication, India
Dr. N. Tamil Selvan IAEME Publication, India Er. D. S. Chengalvarayam IAEME Publication, India Copy Editors
Mr. K.Prasanth IAEME Publication, India
Mr. T.Nagarajan IAEME Publication, India
Editorial Board
Dr. Barish Dantal Application Development Engineer, Momentive Performance Materials, USA.
Dr. Mohamed Saber National Research Center (NRC) El Dokki, Giza, Egypt.
Dr. H. N. Reddappa Bangalore Institute of Technology, Karnataka, India.
Dr. Fateh Mebarek-Oudina Skikda University, Algeria.
Dr. Audai Hussein Al-Abbas Al-Musaib Technical College, Babylon, Iraq.
Dr. Mohd Azman Bin Abdullah Universitiy Teknikal Malaysia Melaka, Malaysia.
Dr. T.R.Vijayaram VIT University,Chennai.
Dr. M. Chithirai Pon Selvan Amity University, Dubai.
Dr. Chao Wang Nanyang Technological University, Singapore.
Dr. Madhu D Govt. Engineering College, KRPET, India.
Dr. R. Dilli babu Anna University, India.
Dr. A.Elaya perumal Anna University, India.
Dr. Mohamed Kchaou University Of Sousse, Tunisia.
Dr. Anan Suebsomran King Mongkut’s University of Technology North Bangkok , Thailand.
Dr. A. G. Matani Govt. College of Engineering, Amravati ,India.
Dr. Vivek Sachan SHIATS, Allahabad, India
Dr. Pallavi.H.Agarwal Babaria Institute of Technology, Gujarat, India Prof. Raj Kumar Yadav Adina Institute Of Science And Technology, Sagar, M.P Dr. İlhan ASİLTÜRK Selcuk University, Turkey
Dr. Sudarshan Rao K Shri Madhwa Vadiraja Institute of Technology and Management, Karnataka, India
Dr. Kondaveeti Srinivasa Rao CMR College of Engineering & Technology, Hyderabad, India
Dr. Ravi Burla Autodesk Inc., Novi, MI
Dr. Jingchao Zhang University of Nebraska-Lincoln,USA Dr. Nilaj N. Deshmukh Fr.C.Rodrigues Institute of Technology, India Dr. Nadia MOUHIB National School of Electricity and Mechanic MOROCCO Dr. M. L. Meena Malaviya National Institute of Technology, Jaipur, India Dr. Raffi Mohammed NRI Institute of Technology, Indian
Dr. Ajay Verma Padmashri Dr. V.B. Kolte College of Engineering, Maharashtra, India Dr. Sathish Rao U Manipal University,Karnataka-India
Dr. Irfan. G Akshaya Institute of Technology, Karnataka, India Dr. Sunada Chakravarthy Sunedison Inc, USA
4/7/2021 International Journal of Mechanical Engineering & Technology (IJMET), Journal Impact Factor (2016)=9.2286, Scopus Indexed Journ…
www.iaeme.com/Ijmet/index.asp 4/5
Prof. S. Sathish Kumar Vel Tech, Chennai, India
Dr. M. Ganesan Saranathan College of Engineering, Trichy, India
Dr. CH V K N S N MOORTHY Institute of Aeronautical Engineering(Autonomous), Telangana State, INDIA Er. Anshul Singhal Massachusetts Institute of Technology (MIT), USA
Dr. Ornella Chiavola ROMA TRE University, Rome, Italy Dr. H. Erdem Çamurlu Akdeniz University, TÜRKİYE
Dr. GIRISHA L PES Institute of Technology and Management, Karnataka, India Dr. M. Mubarak MEA Engineering College, Kerala, India
Dr. Ahmed Daabo University of Mosul, Mosul, Iraq Dr. Ambarish Maji MLR Institute of Technology, India
Dr. Hao Yi Chongqing University, China
Dr. Bambang Leo Handoko Bina Nusantara University of Indonesia
Prof. Jaafar Jaber Abdulhameed Almustansiririyah University, College of Engineering, Baghdad, Iraq Dr. S A Mojhan Krishna Associate Professor, Department of Mechanical Engineering,
Vidyavardhaka College of Engineering, Mysuru, Karnataka, India.
Dr. Prateek Nigam Bansal College of Engineering, Madhya Pradesh, India
Dr. Ehsaan Bagherian Inspection Technology & Quality Assurance National Institute (ITQAN), Saudi Arabia
Dr. Mohamed KCHAOU College of Engineering, University of Bisha, Saudi Arabia; National Engineering School of Sfax, University of Sfax, Tunisia
Dr. Shubham R Suryawanshi MET’s Institute of Engineering, Bhujbal Knowledge City, Nashik, India Dr. Diwan Mohit Balkrishna Shankersinh Vaghela Bapu Institute of Technology, Gujarat India Dr. Maryam Sadri Sharif University of Technology and Aerospace Research Institute, Tehran-
Iran.
Dr. A R Pradeep Kumar Dhanalakshmi College of Engineering, Tamilnadu, India Dr. Siamak Hosseinzadeh University of Pretoria, Pretoria, South Africa
Dr. Eriki Ananda kumar Associate Professor, Dept. of Mechanical Engineering, Faculty of Engineering, Science and Technology, Nilai University, Malaysia
Dr. Dhanasekaran S Annamalai University, Tamil Nadu, India
Dr. Basanta Kumar Bhuyan Professor, MNNIT Allahabad, FET-MRIIRS, Faridabad, India.
Prof. Pavlo Maruschak Vice-Rector for Scientific Research of Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine.
Dr. T. Kamatchi Associate Professor, Mechanical Department, Velammal College of Engineering and Technology, Tamilnadu, India.
Dr. P. Vivek Head of the Department, Department of Automobile Engineering, Annapoorana Engineering College, Salem, Tamilnadu, India
Dr. Deepa Kodali Department of Materials Science and Engineering, Tuskegee University, Tuskegee, Alabama
Reviewer Board
Dr. K.S.Zakiuddin Priyadarshini College of Engineering, India Dr. R.Edison Chandraseelan SMKFIT,India
Dr. Syed Anisuddin Caledonian College of Engineering, Sultanate of Oman
Er. Vinod Singh Yadav MNIT, India
Dr. S.Sreenatha Reddy Universal College of Engineering and Technology, India Dr. M. Victor Raj Sardar Raja College of Engineering, India
Dr. V.Baskaran Bannari Amman Institute of Technology, India
Dr. Ratri Parida IIT Kharagpur, India
Dr. G.Kalivarathan PSN Institute of Technology and Science,India Er. N.Vijayponraj PSN Institute of Technology and Science, India Dr. R.Uday Kumar Mahatma Gandhi Institute of Technology, India Prof. Manikandapirapu P.K Dayananda Sagar College of Engineering, India Dr. Srinivasa G.R Dayananda Sagar College of Engineering, India
Dr. Sudhakar K.G K L University, India
Dr. Chavan Dattatraya K. MMCOE, Karvenagar, Pune
Dr. Rahul Davis SHIATS-DU, Allahabad
Prof. Potnuru Govinda Rao GMR Institute of Technology,Rajam Dr. Velamala Rambabu G.M.R.Institute of Technology,Rajam
4/7/2021 International Journal of Mechanical Engineering & Technology (IJMET), Journal Impact Factor (2016)=9.2286, Scopus Indexed Journ…
www.iaeme.com/Ijmet/index.asp 5/5
Dr. V. Chitti Babu GMR Institute of Technology, Rajam, A.P
Dr. Ravindra D. Jilte Vidyavardhini’s College of Engineering and Technology,MSQ Dr. Gurudutt Sahni DGM & HOD Leader Valves Ltd, Punjab, India
Dr. Prashant H.S Sir M Visvesvaraya Institute of Technology, Bangalore, India Er. Fares Mohammed Laid REKBI Research Center in Industrial Technologies CRTI, Algeria, India
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)
Indexing and Listing
IJM| IJARET| IJCIET| IJMET | IJECET| IJEET| IJCET| IJITMIS| IJGM| IJARM| IJMHRM| IJIPR| JCET| IJLIS| JECET| JEET| JCIET| JOM| JMET Google Scholar |Thomson Reuters' Research ID| Call For Paper| Online Paper Submission| List of Journals | Subscription| Processing Fee
Home| About IAEME| Contact Us| Payment Policy| Article Removal Fee
4/7/2021 International Journal of Mechanical Engineering & Technology (IJMET), Journal Impact Factor (2016)=9.2286, High Impact Factor Jo…
www.iaeme.com/Ijmet/issues.asp?VType=10&IType=2&JType=IJMET&PageNumber=4 1/3
Enter Search Keyword
Home|Site Map | Careers|Contact Us
22152 Articles From 91 Journals
Online Paper Submission
CALL FOR PAPER April - April 2021 ISSUE Select Language ▼
International Journal of Mechanical Engineering and Technology (IJMET) - Scope Database Indexed
ISSN Print : 0976 – 6340 ISSN Online: 0976 - 6359 Volume 10, Issue 2 (2019)
Copyright ©IAEME, 2019
Bibliometrics
DownLoad (3 Weeks) : 2474 DownLoad (6 Weeks) : 3546 DownLoad (6 Months) : 4327
DownLoad (1 Year) : 4628
S.No Article ID Title of the Paper Authors Pages Downloads How to
cite this article
151 IJMET_10_02_151
EFFECT OF DOUBLE LEG BOUND EXERCISE ON EXPLOSIVE CAPABILITY OF LEG MUSCLE POWER IN THE UNMUS VOLLEYBALL MEN'S TEAM Download
PDF Abstract Reference
HENDRA JONDRY HISKYA AND
CAROLUS WASA 1453 - 1460 23 View
152 IJMET_10_02_152
A NEW METHODOLOGY FOR PREDICTING QUANTITY OF AGGLOMERATION BETWEEN ELECTRODES IN PMEDM ENVIRONMENT Download
PDF Abstract Reference
MOHAMMED ABDULRIDHA ABBAS, MOHD AMRI BIN LAJIS AND GHASSAN SHAKER ABDUL RIDHA
1461 - 1479 34 View
153 IJMET_10_02_153
STUDY OF OPERATION OF POWER-GENERATING DEVICES OF GASEOUS FUELS COMBUSTION Download
PDF Abstract Reference
ANTON A. SINITSYN, NATALIA N.
BOYTSOVA, IRINA G.
AKHMETOVA, SULTAN O. MAKOEV, ARSALAN ASADPOORI, O.A.
STEPANOV, N.V. RYDALINA, E.O.
ANTONOVA AND B.G. AKSENOV
1480 - 1490 35 View
154 IJMET_10_02_154
KALMAN FILTER ASSISTED FINE-GRAINED LOCATION ESTIMATION ALGORITHM FOR INDOOR WIRELESS SENSOR NETWORKS Download
PDF Abstract Reference
M. SARANYA NAIR, M. EDWIN and
S. JOSEPH SEKHAR 1491 - 1500 15 View
155 IJMET_10_02_155
TECHNICAL SOLUTIONS FOR ECOLOGICALLY SAFE AND SUSTAINABLE DEVELOPMENT OF SHELF DEPOSITS Download
PDF Abstract Reference
BOGDAN VASILEV, DMITRIJ
MARDASHOV 1501 - 1506 20 View
156 IJMET_10_02_156
DETERMINATION OF SPEED OF MOVEMENT OF THE PARTICLE ON THE ROTATING CONE WITH SHOVELS Download
PDF Abstract Reference
KOTOV D.N, ISAEV YU.M, KRYUCHIN N.P, SEMASHKIN N.M
AND KRYUCHIN A.N 1507 - 1514 18 View
157 IJMET_10_02_157
LAND AS A FACTOR OF PRODUCTION IN AGRICULTURE AND FEATURES OF AGRICULTURAL PRACTICES Download
PDF Abstract Reference
A.N. SEMIN AND L. E. NAMYATOVA 1515 - 1521 18 View
158 IJMET_10_02_158
ELEMENTAL ANALYSIS AND COMBUSTION
CHARACTERISTICS EVALUATION OF NIGERIAN BIOMASS RESOURCES Download
PDF Abstract Reference
BALOGUN KUNLE, LASODE MUYIWA, ONOKWAI ANTHONY, EZUGWU CHINEDU, OLAYANJU TAJUDEEN AND OSUEKE CHRISTIANA
1522 - 1527 15 View
159 IJMET_10_02_159
ACCESS TO ELECTRICITY AND DRINKING WATER IN THE PRESENCE OF ETHNIC DIVERSITY: EVIDENCE FROM NIGERIA Download
PDF Abstract Reference
ADEWARA SUNDAY, OYENUBI ADEOLA, AGBA DOMNIC ZAAN, RASAK BAMIDELE, OLASEHINDE DAVID, ADAMA JOSEPH AND OLONI ELIZABETH
1528 - 1545 15 View
160 IJMET_10_02_160
TECHNOLOGICAL TRAINING NEEDS OF SMALL SCALE OIL- PALM PROCESSORS IN NIGERIA Download
PDF Abstract Reference
ADENIYI V.A, MATANMI B.M, AJIBOYE B.O, KOLAWOLE A.E,
AJALA A.O AND OWOLABI A.O 1546 - 1557 18 View
161 IJMET_10_02_161 RESEARCH ON THE EFFECTS OF CUTTING VELOCITY AND DEPTH OF CUT ON THE SURFACE ROUGHNESS OF TEETH FLANK WHEN CUTTING GLEASON CURVED BEVEL GEARS
HOANG XUAN THINH, PHAM VAN
DONG, DO DUC TRUNG, NGUYEN 1558 - 1567 21 View
4/7/2021 International Journal of Mechanical Engineering & Technology (IJMET), Journal Impact Factor (2016)=9.2286, High Impact Factor Jo…
www.iaeme.com/Ijmet/issues.asp?VType=10&IType=2&JType=IJMET&PageNumber=4 2/3
BY HARD ALLOY CUTTER HEAD Download PDF Abstract Reference
HONG SON, NGUYEN HUY KIEN
162 IJMET_10_02_162
IMPACT OF EXCHANGE RATE ON THE MANUFACTURING SECTOR IN NIGERIA Download
PDF Abstract Reference
ADEBANJO JOSEPH FALAYE, OLUWASEGUN ESEYIN, ADEGBOLA OTEKUNRIN, FESTUS ASAMU, PETER OGUNLADE, BEN- CALEB EGBIDE, BAMIDELE RASAK, NIYI-OYEBANJI MOYINOLUWA, DAMILOLA ELUYELA
1568 - 1583 13 View
163 IJMET_10_02_163
EXPERIMENTAL INVESTIGATION ON THE MECHANICAL PROPERTIES OF LM6 ALUMINUM ALLOY REINFORCED WITH BORON CARBIDE AND TITANIUM HYBRID COMPOSITES Download
PDF Abstract Reference
PRABHU RUBESH GEORGE, I.
KANTHARAJ, S.
MOHANASUNDARAM, G. BABU RAO, HIRAN GABRIEL D J
1584 - 1593 24 View
164 IJMET_10_02_164
FUZZY LOGIC FOR SIMPLY PRIORITIZING INFORMATION IN ACADEMIC INFORMATION SYSTEM Download
PDF Abstract Reference
DITDIT NUGERAHA UTAMA AND
UJANG TARYANA 1594 - 1602 15 View
165 IJMET_10_02_165
THE RESEARCH TASK OF BANKS AND AUTHORIZED GOVERNMENT INSTITUTION INTERESTS IN
MANUFACTURING COMPANIES’ INVESTMENT PROJECTS CONGRUENCE Download
PDF Abstract Reference
VLADISLAVA POLETAEVA, DENIS PEREPELITSA, TAT'YANA ARHANGEL'SKAYA, IL'YAS ZARIPOV AND SZABOLCS PÁSZTOR
1603 - 1609 14 View
166 IJMET_10_02_166
COMPUTER HUMAN INTERACTION RESEARCH FOR CHILDREN WITH AUTISM SPECTRUM DISORDER (ASD): A SYSTEMATIC LITERATURE REVIEW Download
PDF Abstract Reference
FREDY JINGGA, MEYLIANA, ACHMAD NIZAR HIDAYANTO,
HARJANTO PRABOWO 1610 - 1619 13 View
167 IJMET_10_02_167
ANALYSIS OF HUMAN AND ERGONOMIC FACTOR INFLUENCE FOR PREVENTING MAJOR ACCIDENT IN OFFSHORE OIL AND GAS INDUSTRY Download
PDF Abstract Reference
RAMA GILANG PERDANA, TAUFIK
RONI SAHRONI 1620 - 1628 16 View
168 IJMET_10_02_168
DESIGN IMPROVEMENT OF THERAPY CLINIC FOR AUTISM SPECTRUM DISORDER USING ERGONOMIC ASPECTS Download
PDF Abstract Reference
ARDHANA HARIWIDAGDO AND
TAUFIK RONI SAHRONI 1629 - 1639 11 View
169 IJMET_10_02_169
STUDY ON AL2O3 DUPLEX COATINGS DEPOSITED BY NEW MICRO-ARC OXIDATION (MAO) PROCESS USING NATURAL ADDITIVES OF RICE HUSHES ASH (RHA) AND PORCELANITE ROCKS OF PRE-ANODIZED 6061 AL ALLOYS Download
PDF Abstract Reference
SAMIR HAMID AWAD 1640 - 1654 12 View
170 IJMET_10_02_170
DISPLAYING OF TRACTOR PERFORMANCE Download PDF Abstract Reference
ALI ABDULQADER MOHAMMED
ALI 1655 - 1661 26 View
171 IJMET_10_02_171
EXPERIMENTAL STUDY OF VARIATION IN PERFORMANCE PARAMETERS OF VCR SYSTEM WITH & WITHOUT SUBCOOLING OF REFRIGERANT BY THERMOELECTRIC PELTIER COOLING MODULE Download
PDF Abstract Reference
ABHIJEET GHUTE and
VENKATESH M. KULKARNI 1662 - 1670 13 View
172 IJMET_10_02_172
COMPARISON OF THE MECHANICAL CHARACTERISTICS OF ALUMINIUM SIC COMPOSITES CAST IN SAND AND METAL MOULDS Download
PDF Abstract Reference
PHILIP O. BABALOLA, ANTHONY O. INEGBENEBOR, CHRISTIAN A.
BOLU, SHELLA I. JOHN 1671 - 1681 14 View
173 IJMET_10_02_173
DEVELOPMENT OF ONCOM (ONLINE COMMUNITY) PLATFORM: A CONCEPTUAL MODEL Download
PDF Abstract Reference
DEVYANO LUHUKAY, YOHANNES KURNIAWAN, KEVIN TRISNIO, AGUNG PRASETYO, CINDY PRICENSIA, EKA PUTRA AND SURYANTO FAMADI
1682 - 1687 14 View
174 IJMET_10_02_174
COMMON FIXED POINT RESULTS FOR GENERALIZED CONTRACTIVE MAPS IN G-SYMMETRIC SPACES Download
PDF Abstract Reference
KANAYO STELLA EKE AND
JIMEVWO GODWIN OGHONYON 1688 - 1698 12 View
175 IJMET_10_02_175
MOBILE LEARNING IN SUB-SAHARAN AFRICA: PANACEA FOR DRIVING INCLUSIVE DEVELOPMENT Download
PDF Abstract Reference
STEPHEN OLUWATOBI, AFOLASADE OLUWATOBI, DAMILARE OSHOKOYA, ISAIAH OLURINOLA, PHILIP ALEGE
1699 - 1709 12 View
176 IJMET_10_02_176
EMOTIONAL INTELLIGENCE AND STRESS COPING STRATEGIES AMONG EMPLOYESS IN INSURANCE SECTOR Download
PDF Abstract Reference
V.P. NITHIN DAS, D. DEEPA, P.S.
VENKATESWARAN 1710 - 1716 20 View
177 IJMET_10_02_177 ANALYSIS OF ZVS INTERLEAVED LLC RESONANT CONVERTER FOR CURRENT BALANCING IN DC DISTRIBUTION SYSTEM Download
PDF Abstract Reference
CHANDRA SEKHAR GARLAPATI
AND RAVI KISHORE D 1717 - 1725 14 View
4/7/2021 International Journal of Mechanical Engineering & Technology (IJMET), Journal Impact Factor (2016)=9.2286, High Impact Factor Jo…
www.iaeme.com/Ijmet/issues.asp?VType=10&IType=2&JType=IJMET&PageNumber=4 3/3
178 IJMET_10_02_178
THE EFFECTIVENESS OF THE PERFORMANCE OF COMMUNITY BASED 3R WASTE MANAGEMENT POLICY IN KEDIRI CITY Download
PDF Abstract Reference
YENIK PUJOWATI, ANDY FETTA WIJAYA, BAMBANG SANTOSO AND SOESILO ZAUHAR
1726 - 1732 26 View
179 IJMET_10_02_179
INFLUENCE ANALYSIS OF EDUCATION QUALITY ON CAMPUS INNOVATIONS IN PRIVATE UNIVERSITIES Download
PDF Abstract Reference
SOENARTO, HENING WIDI OETOMO, SUHERMIN, M ADHI PRASNOWO, MUH BARID NIZARUDIN WAJDI
1733 - 1738 14 View
180 IJMET_10_02_180
EXAMINING THE RELATIONSHIP BETWEEN JOB SATISFACTION, ORGANISATIONAL COMMITMENT &
TURNOVER INTENTION AMONG EMPLOYEES OF CONSTRUCTION INDUSTRY Download
PDF Abstract Reference
V ASHISH KOUNDINYA AND C R
SUNDARARAJAN 1739 - 1751 12 View
181 IJMET_10_02_181
IMPACT OF ROAD SURFACE ROUGHNESS AND ENGINE TORQUE ON THE LOAD OF AUTOMOTIVE TRANSMISSION SYSTEM Download
PDF Abstract Reference
NGUYEN KHAC TUAN 1752 - 1761 34 View
182 IJMET_10_02_182
OPTIMIZATION OF CNC MILLING PARAMETERS THROUGH THE TAGUCHI AND RSM METHODS FOR SURFACE ROUGHNESS OF UHMWPE ACETABULAR CUP Download
PDF Abstract Reference
W.D. LESTARI, P.W. ANGGORO, R.
ISMAIL, J. JAMARI, A.P. BAYUSENO 1762 - 1775 24 View
183 IJMET_10_02_183
PERCEPTION OF SUSTAINABLE TOURISM DEVELOPMENT:
INSIGHTS FROM STAKEHOLDERS IN PHU QUOC ISLAND, VIETNAM Download
PDF Abstract Reference
VU MINH HIEU and CHIJIOKE
NWACHUKWU 1776 - 1788 28 View
184 IJMET_10_02_184
SURFACE MODIFICATION OF TITANIUM NITRIDE ON TOOL STEEL BY ELECTRICAL DISCHARGE MACHINING IN UREA SOLUTION Download
PDF Abstract Reference
VORAVIT NAKWATANANUKOOL
and APIWAT MUTTAMARA 1789 - 1797 26 View
Pages 1 | 2 | 3 | 4 |
IJM| IJARET| IJCIET| IJMET | IJECET| IJEET| IJCET| IJITMIS| IJGM| IJARM| IJMHRM| IJIPR| JCET| IJLIS| JECET| JEET| JCIET| JOM| JMET Google Scholar |Thomson Reuters' Research ID| Call For Paper| Online Paper Submission| List of Journals | Subscription| Processing Fee
Home| About IAEME| Contact Us| Payment Policy| Article Removal Fee
http://www.iaeme.com/IJMET/index.asp 1762 [email protected] International Journal of Mechanical Engineering and Technology (IJMET)
Volume 10, Issue 02, February 2019, pp. 1762–1775, Article ID: IJMET_10_02_182
Available online at http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=10&IType=2 ISSN Print: 0976-6340 and ISSN Online: 0976-6359
© IAEME Publication Scopus Indexed
OPTIMIZATION OF CNC MILLING
PARAMETERS THROUGH THE TAGUCHI AND RSM METHODS FOR SURFACE ROUGHNESS
OF UHMWPE ACETABULAR CUP
W. D. Lestari
,R. Ismail, J. Jamari, A. P. Bayuseno Diponegoro University, Faculty of Engineering, Department of Mechanical Engineering, Semarang, Indonesia
Jl. Prof. Soedarto, Tembalang, Semarang 50275, Indonesia
P. W. Anggoro
University of Atma Jaya Yogyakarta, Faculty of Industrial Technology, Department of Industrial Engineering, Yogyakarta, Indonesia
Jl. Babarsari 44, 55281, Yogyakarta, Indonesia
ABSTRACT
CNC milling is a flexible technology for machining UHMWPE with low machinability. This study was undertaken for modeling of the experimental data with CNC milling parameters (spindle speed, feed rate, and step over) against the response of surface roughness of UHMWPE acetabular cup. Here the significant machining parameters on the surface roughness were first analysed by ANOVA, while the optimized parameters for yielding the minimum surface roughness were determined with the Taguchi method and the Response Surface Methodology (RSM). In the milling of UHMWPE acetabular cup, the method was confirmed valid for optimizing the cutting parameters with the minimal surface roughness. Accordingly, the minimum surface roughness determined by the Taguchi method could correspond to the optimum levels of spindle speed of 6500 rpm, the feed rate of 1500 mm/rev and step over about 0.1 mm. The Taguchi and RSM based models yielded the consistent results, hereby justifying their suitability. In conclusion, the examination by statistical indicators confirmed the acceptability of these examples.
Key words: UHMWPE acetabular cup; Surface roughness; Taguchi method; RSM;
Cutting parameters.
Cite this Article: W.D. Lestari, P.W. Anggoro, R. Ismail, J. Jamari, A.P. Bayuseno, Optimization of CNC Milling Parameters through the Taguchi and RSM Methods for Surface Roughness of UHMWPE Acetabular Cup, International Journal of
Mechanical Engineering and Technology 10(2), 2019, pp. 1762–1775.
http://www.iaeme.com/IJMET/issues.asp?JType=IJMET&VType=10&IType=2
http://iaeme.com/Home/journal/IJMET 351 [email protected] International Journal of Mechanical Engineering and Technology (IJMET)
Volume 10, Issue 02, February 2019, pp. 351-360, Article ID: IJM ET_ 10_02_036 Available online at http://iaeme.com/Home/issue/IJMET?Volume=10&Issue=2 ISSN Print: 0976-6340 and ISSN Online: 0976-6359
© IAEME Publication Scopus Indexed
EXPERIMENTAL INVESTIGATION ON
PERFORMANCE CHARACTERISTICS OF FOUR STROKE SINGLE CYLINDER PETROL ENGINE
USING A PRE-HEATING SET-UP FOR METHANOL BLENDS
M. VykuntaRao
*and K. Simhadri
Department of Mechanical Engineering, GMR Institute of Technology, GMR Nagar, Rajam- 532127, Andhra Pradesh State, India
* Corresponding author ABSTRACT
With ever increasing concern on energy security, future oil supplies, high
performance of automobiles, the global community has been seeking for non- petroleum alternative fuels. it leads to research in modifying the mechanical design and analysing its performance characteristics with vary in fuel used, applied load on
engine, torque, lubrication etc. preheating is a method to increase the thermal efficiency of engine, decrease the humidity in inlet air supplied, reduce the undesired effects of cold start and in turn helps for complete combustion. The present research work was to analysis the performance characteristics of a four stroke DTS-I, single cylinder, air cooled, spark injection petrol fuelled with methanol blends in different concentrations. The results are compared with the modified engine in which the inlet air gets preheated. The engine test results showed improvement in all performance characteristics in modified engine. It results an increase in brake thermal efficiency by 4-6%, indicated thermal efficiency by 3-5% and improvement in Brake specific fuel consumption by 5.4% with comparison with normal engine.
Keywords : Methanol, Brake thermal Efficiency, Pre-heating, Brake Specific Fuel Consumption.
Cite this Article: VykuntaRao and K. Simhadri, Experimental Investigation on M.
Performance Characteristics of Four Stroke Single Cylinder Petrol Engine using a Pre- Heating Set-Up for Methanol Blends, International Journal of Mechanical Engineering and Technology, 10(2), 2019, pp. 351-360.
http://iaeme.com/Home/issue/IJMET?Volume=10&Issue=2
http://iaeme.com/Home/journal/IJMET 451 [email protected] International Journal of Mechanical Engineering and Technology (IJMET)
Volume 10, Issue 02, February 2019, pp. 451 460, Article ID: IJMET_10_02_047 – Available online at http://iaeme.com/Home/issue/IJMET?Volume=10&Issue=2 ISSN Print: 0976-6340 and ISSN Online: 0976-6359
©
IAEMEPublication
Scopus Indexed
MODEL OF MUTUAL INVESTMENT
IN SMART CITY WITH COSTS FOR OBTAINING DATA BY SECOND INVESTOR
B. Akhmetov Associate professor
Yessenov University, Kazakhstan, Aktau V. Lakhno
Prof
Yessenov University, Kazakhstan, Aktau V. Malyukov
Prof
Department of Computer systems and networks,
National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine S. Sarsimbayeva
Associate professor
K. Zhubanov Aktobe Regional State University Kazakhstan, Aktobe ,
M. Zhumadilova Associate professor
Yessenov University, Kazakhstan, Aktau Dr. F. Malikova
Associate professor
Almaty University of Power Engineering and Telecommunications, Kazakhstan ABSTRACT
There is proposed a detailed model for a decision support system for investment in SMART CITY technologies. The model is distinguished by the assumption that the first investor does not have complete information, both about the financial strategies of the second investor and about the states of his financial resources aimed at SMART CITY
investing. In this case, the first investor has the opportunity to obtain additional
information by the expense of a part of his financial resources. The last one makes it
http://iaeme.com/Home/journal/IJMET 314 [email protected] International Journal of Mechanical Engineering and Technology (IJMET)
Volume 10, Issue 02, February 2019, pp. 314 326, Article ID: IJMET_10_02_032 – Available online at http://iaeme.com/Home/issue/IJMET?Volume=10&Issue=2 ISSN Print: 0976-6340 and ISSN Online: 0976-6359
©
IAEMEPublication
Scopus Indexed
INTERROGATING THE RELEVANCE OF
THOMAS MALTHUS THEORY ON POPULATION AND THE CHALLENGES OF NIGERIA’S
BOURGEONING POPULATI ON
Joseph Ibrahim Adama*
Department of Economics, Landmark University, Omu Aran, Kwara State, Nigeria Jacob Audu
Department of Political Science and International Studies, Ahmadu Bello University, Zaria, Nigeria
Dominic Zann Agba
Department of Economics, Landmark University, Omu Aran, Kwara State, Nigeria Sunday Olabisi Adewara
Department of Economics, Landmark University, Omu Aran, Kwara State, Nigeri a.
*corresponding author ABSTRACT
Issues of population explosion has evoked several images characterized by
emotional, value-laden and often paranoiac connotation that cannot be obviously
ignored considering its threatening challenges. It is against the foregoing that this paper attempt to interrogate the relevance of Thomas Malthus theory on population and the challenges of the bourgeoning population explosion in Nigeria. The core objective of this paper is to investigate the relevance of the theory on Nigeria’s population. Other objectives are to ascertain the effects of the population explosion on the Nigerian urban
areas; food security, crimes and security and poverty. In terms of methodology, the
paper relies on an explanatory design and some empirical data generated through secondary sources and official documents were examined. The data were analysed using a descriptive method of analysis. The paper identified the relevance of Malthus theory on the bourgeoning population explosion on the following key areas: Food Security;
Poverty Rate; Urbanization; crimes and Security Threat. After examination of official documents and secondary data, the paper concludes that population explosion has continued to undermine the achievement of development’s goals in Nigeria. A population growing faster than the output of modern goods and services not only
