Optimization of Well Spacing Ratio of Injection Production Wells in Low Permeability Anisotropic Reservoir
Teks penuh
Dokumen terkait
Hasil analisis ragam pada berbagai variabel pengamatan agronomis menunjukkan bahwa perlakuan rasio tetua pada produksi benih varietas Bima 3 memberikan pengaruh
Hasil penelitian menunjukkan bahwa populasi tanaman tidak berpengaruh terhadap tinggi tanaman tetua Bima 3 dan STJ-01, tinggi letak tongkol tetua betina Bima 3
five spot inverted pattern, based on the sensitivity of water injection rate obtained optimum injection rate which give the greatest cumulative oil production of 600 bbl/day, with
Based on calculation of the mean residence time of NPITs in each swept area, it is Determination of contribution proportion of injection wells in oil production by interwell tracer
In this study, in order to satisfy the main objective of Riam Jerawi Reservoir, where the energy of 6 MW should be provided every month, a linear optimization model is applied for three
Based on the optimization results in Figure 8, the optimal injection molding settings were obtained at an injection pressure of 11.5 MPa and injection time of 1.9 seconds which resulted
