Chapter 8. Conclusion
redundantly-actuated robot, requires more initial installation cost; however, this cost can be recovered within 3 years by saved electricity cost, which would increase with rising electricity cost.
Bibliography
Bibliography
[1] Shintaku, E., “Minimum energy trajectory for an underwater manipulator and its simple planning method by using a Genetic Algorithm,” Advanced Robotics, vol. 13, no.
2, pp. 115-138, 1999.
[2] Field, G., Stepanenko, Y., “Iterative dynamic programming: an approach to minimum energy trajectory planning for robotic manipulators,” in IEEE International Conference on Robotics and Automation, vol. 3, pp. 2755‐2760, 1996.
[3] Bobrow, J.E., Martin, B., Sohl, G., Wang, E.C., Park, F. C., Kim, J., “Optimal robot motions for physical criteria,” in Journal of Robotic systems, vol. 18, no. 12, pp. 785‐795, 2001.
[4] Saramago, S.F.P., Steffen, V. JR, “Optimization of the trajectory planning of robot manipulators taking into account the dynamics of the system,” Mechanism and Machine Theory, vol. 33, no. 7, pp. 883-894, 1998.
[5] Diken, H., “Energy efficient sinusoidal path planning of robot manipulators”, Mechanism and Machine Theory vol. 29, no. 6, pp. 785-792, 1994.
[6] Westkamper, E., Schraft, R.D., Schweizer, M., Herkommer, T.F., Meibner, A., “Task- oriented programming of large redundant robot motion”, Robotics and Computer- Integrated Manufacturing vol. 14, pp. 363-375, 1998.
[7] Jouaneh, M.K., Wang, Z., Dornfeld, D.A., “Trajectory planning for coordinated motion of a robot and a positioning table: part 1 – path specification”, IEEE Transactions on Robotics and Automation vol. 6, no. 6, pp. 735-745, 1990.
[8] Halevi, Y., Carpanzano, E., Montalbano, G., Koren, Y., “Minimum energy control of redundant actuation machine tools”, Annals of CIRP vol. 60, no. 1, pp. 433-436, 2011.
Bibliography
[9] Martin, B.J., Bobrow, J.E., “Minimum-effort motions for open-chain manipulators with task-dependent end-effector constraints” The International Journal of Robotics Research, vol. 18, no. 2, pp. 213-224, 1999.
[10] Freese, M., Singh, S. P. N., Fukushima, E. F., Hirose, S., “Bias-Tolerant Terrain Following Method for a Field Deployed Manipulator”, in IEEE International Conference on Robotics and Automation, pp. 175-180, 2006.
[11] Agrawal, S.K., Fattah, A., “Gravity-balancing of spatial robotic manipulators,”
Mechanism and Machine Theory, vol. 39, pp. 1331-1344, 2004.
[12] Wongratanaphisan, T., Chew, M., “Gravity Compensation of Spatial Two-DOF Serial Manipulators,” in Journal of Robotic System, vol. 19, no. 7, pp. 329-347, 2002.
[13] Koser, K., “A cam mechanism for gravity-balancing,” Mechanics Research Communications, vol. 36, no. 4, pp. 523-530, 2009.
[14] Ulrich, N., Kumar, V., “Passive Mechanical Gravity Compensation for Robot Manipulator,” in Proc. of the IEEE International conference on Robotics and Automation, pp. 1536-1541, 1991.
[15] Hwang, J.K., “Design of Payload Adaptive Gravity Compensator for Multi-DOF Manipulator” School of Mechanical Engineering, Korea University, M.S. Thesis, 2011.
[16] Kolarski, M., Vukobratovic, M., Borovac, B., “Dynamic analysis of balanced robot mechanisms”, Mechanism and Machine Theory vol. 29, no. 3, pp. 427-454, 1994.
[17] Dasgupta, B., Murthyunjaya, T.S., “Force Redundancy in Parallel Manipulators:
Theoretical and Practical Issues,” Mechanism and Machine Theory, vol. 33, no. 6, pp.
727-742, 1998.
[18] Kim, S., “Minimum Consumed Energy Optimized Trajectory Planning for
Bibliography
[19] Shin, H., Lee, S., Jeong, J.I., Kim, J. “Antagonistic Stiffness Optimization of Redundantly Actuated Parallel Manipulators in a Predefined Workspace”, IEEE/ASME Transactions on mechatronics, vol.18, no.3, 2013
[20] Muller, A., “Internal Preload Control of Redundantly Actuated Parallel Manipulator – Its Application to Backlash Avoiding Control,” IEEE Transactions on Robotics &
Automation, vol. 21, pp. 668-677, 2005.
[21] Kim, J., Hwang, J.C., Kim, J.S., Iurascu, C., Park, F.C., Cho, Y.M., “Eclipse II: A new parallel mechanism enabling continuous 360-degree spinning plus three-axis translational motions”, IEEE Transaction on Robotics and Automation vol. 18, no. 3, pp.
367-373, 2002.
[22] Jeon, D., Kim, K., Jeong, J.I., Kim, J., “A calibration method of redundantly actuated parallel mechanism machines based on projection technique”, Annals of CIRP vol. 59, no.
1, pp. 413-416, 2010.
[23] Jeong, J.I., Kang, D., Cho, Y.M., Kim, J., “Kinematic calibration for redundantly actuated parallel mechanism”, ASME Journal of Mechanical Design, vol. 126, no. 2, pp.
307-318, 2004.
[24] Kim, J., Cho, Y.M., Park, F.C., Lee, J.M., “Design of a parallel mechanism platform for simulating six degrees-of-freedom general motion including continuous 360-degree spin”, Annals of CIRP, vol. 52, no. 1, pp. 347-350, 2003.
[25] In, W., Lee, S., Jeong, J.I., Kim, J., “Design of a planar-type high speed parallel mechanism positioning platform with the capability of 180 degree orientation”, Annals of CIRP, vol. 57, no. 1, pp. 421-424, 2008.
[26] ENERGY PRICES & TAXES, 4th Quarter 2013’, International Energy Agency, pp 333.
Bibliography
speed drives,” IEEE Transactions on Industrial Electronics, vol. 43, no. 1, pp. 226-231, 1996.
[28] Raj, C.T., Srivastava, S.P., Agarwal, P., “Energy efficient control of three-phase induction motor-a review,” International Journal of Computer and Electrical Engineering, vol. 1, no. 1, pp. 1793-8198, 2009.
[29] Sergaki, E.S., Stravrakakis, G.S., Pouliezos, A.D., “Optimal Robot Speed Trajectory by Minimization of the Actuator Motor Electromechanical Losses”, Journal of Intelligent and Robotic Systems, vol. 33, pp. 187-207, 2002.
[30] Drofenik, U., Kolar, J.W., “A general scheme for calculating switching-and conduction-losses of power semiconductors in numerical circuit simulations of power electronic systems,” Proc. IPEC, 2005.
[31] Hirose, S., Arikawa, K., “Coupled and decoupled actuation of robotic mechanisms”, Advanced Robotics, vol. 15, no. 2, pp. 125-138, 2001.
[32] Chou, L., Song, S.M., “Geometric work of manipulators and path planning based on minimum energy consumption”, ASME Journal of Mechanical Design, vol. 114, pp. 414- 421, 1992.
[33] Collins, S., Ruina, A., Tedrake, R., Wisse, M., “Efficient bipedal robots based on passive-dynamic walkers”, Science (New York, N.Y.), vol. 307, pp. 1082–1085, 2005.
[34] Hirose, S., “A Study of Design and Control of a Quadruped Walking Vehicle”, The International Journal of Robotics Research, vol. 3, no. 2, pp. 113–133, 1984.
[35] Lueke, G., Gardner, J., “Local joint control in cooperating manipulator systems-force distribution and global stability”, Robotica, vol. 11, pp. 111-118, 1993.
[36] Lueke, G., Gardner, J., “Experimental results for force distribution in cooperating
Bibliography
[37] Ryu, S.J., “Joint torque distribution of redundantly actuated parallel mechanism”, Ph.D. Dissertation, School of Mechanical and Aerospace Engineering, Seoul National University, Seoul, South Korea, 2001.
[38] Baines, P.J., Miller, J.K., “Feedback Linearized Joint Torque Control of a Geared, D.C. Motor Driven Industrial Robot”, The International Journal of Robotics Research, vol. 17, no. 2, pp. 169-192, 1998.
[39] Cheng, H., Yiu, Y., Li, Z., “Dynamics and Control of Redundantly Actuated Parallel Manipulators”, IEEE/ASME Transaction on Mechatronics, vol. 8, no. 4, pp. 483-491, 2003.
[40] Manderla, M., Schmitt, D., Konigorshki, U., “Modelling, simulation and control of a redundant parallel robotic manipulator based on invariant manifolds”, Mathematical and Computer Modelling of Dynamical Systems, vol. 16, no. 2, pp. 95-113, 2010.
[41] DELTA TAU, Data systems, Inc., “User Manual Turbo PMAC”, 2008.
Appendix
Appendix
Appendix