• Tidak ada hasil yang ditemukan

acknowledgement

N/A
N/A
Protected

Academic year: 2024

Membagikan "acknowledgement"

Copied!
5
0
0

Teks penuh

(1)
(2)

ACKNOWLEDGEMENT

In the name of Allah, who is the Gracious, Most Merciful and Him alone are worthy of all praise; Alhamdulillah, with His bless, I am able to complete this project with my full effort and within the time constrain given to me. First and foremost, I would like to address my deepest appreciation and sincerest thanks to my dedicated supervisor, Puan Zolidah Kasiran, for her precious guidance, encouragement and constructive criticism that I had been receiving for the preparation of this manuscript and the well going for this study. I also wish to express my sincere appreciation to my lecturer for Research Project Course (ITT580), En Adzhar Bin Abdul Kadir for his guidance, encouragement, comments, ideas, tolerance and support that led to a better quality of my thesis project.

And also to all lecturers in the Faculty of Information Technology and Quantitative Sciences, thanks for their dedication, efforts and support in sharing valuable knowledge.

I do feel most fortunate to have her expert guidance, precious advice and suggestions at every step of my project. I am so grateful to have this opportunity to learn and gain experience doing this project from such a skilled and talented lecturer. Last but not least, to my family, who always motivate me and support me throughout this project, and also to all my friends who helped me along the way, due to complete this project. I wish them best of luck and thank you for everything. To all mentioned here, may Allah bless you all.

(3)

ABSTRACT

Information Technology has come along way since its introduction. The 21st

century has brought Information Technology to new heights and as such that we cannot function properly without any use of Information Technology. And this is where the Intelligent Home system comes in: to provide a means for users to assure them that when they leave home for work, they would also have peace in mind knowing that the system would monitor and take care of their household from anywhere they are through the World Wide Web. With that intention in mind, Information Technology would truly achieve its original objective of improving the efficiency of users through Information Technology. Overview of the project is basically concepts of what those has already been developed but are not widely used yet. It is called with few names which are Smart Home, Home Automation, Home Networking and few other names. It is mostly aim to be conveniences' to all home owners when they are not at home. It is known to mostly in the area of the software and hardware. Electronic devices and overview of the circuit used is stated. Keeping the requirements of modern Intelligent Home system accommodating most desirable features the web-based remote has been designed and reported. The selected appliances are to be controlled remotely through internet and also by local means.

(4)

TABLE OF CONTENT

CONTENT PAGE

APPROVAL DECLARATION

ACKNOWLEDGEMENT ABSTRACT

TABLE OF CONTENTS LIST OF TABLES LIST OF FIGURES

11

iii iv v vi x x

CHAPTER 1: INTRODUCTION 1.1

1.2 1.3 1.4 1.5

Background

Problem Statement Objective

Scope Significance

1 2 2 3 3

CHAPTER 2: LITERATURE REVIEW 2.1 Introduction

2.2 Light Emitter Diode & Parallel Port

2.3 An Internet Web Based Remote Control and Monitoring Rapid Prototyping System

4 4

(5)

CHAPTER 3: PROJECT APPROACH AND METHODOLOGY

3.1 Introduction 9 3.2 Information Gathering 9

3.3 Problem Identification 10

3.4 Design 10 3.5 Development 14

3.5.1 Computer 15 3.5.2 Laser Printer 15 3.5.3 PCB Development Tools 15

3.5.4 PCB Assembly Tools 16 3.5.5 Programming Development Tools 16

3.5.6 Component List 16 3.5.7 Steps to Use PCWH C-Compiler 17

3.5.8 Steps to Programs PIC using Winpic800 17

3.5.9 Power Supply Module 21 3.5.10 PIC Microcontroller 22 3.5.11 MAX232 Transceiver 23 3.6 Implementation and Testing 24

3.7 Documentation 24 3.8 Block Diagram 25 3.9 Flow Chart 26

CHAPTER 4: RESULT AND FINDINGS

4.1 Introduction 28 4.2 Controlling LED Using Serial Port 28

4.3 Results of Application Development 33

Referensi

Dokumen terkait

degree in Manufacturing Engineering in Design at Universiti Teknikal Malaysia Melaka (UTeM).. I would like to express my sincerity appreciation to my supervisor,

First and foremost I wish to take the opportunity to express my greatest gratitude to Jesus Christ for blessing, guidance, health and inspiration leading to the completion of

Firstly, I would like to express my profound and sincere gratitude and respect to Ajarn Phrek Gypmantasiri, my Academic Advisor and Chairman of my thesis committee for his untiring

Finally, I would like to express my great gratitude to my parents and my relatives for their love and encouragement throughout this

iv Finally, I would like to express my sincere thanks to all research funding which support my study, granted by Research Chair Grant, National Science and Technology Development

Sadiqul Islam, Lecturer, Department of Mechanical Engineering Sonargaon University for his guidance, encouragement many ways throughout his project work.. We also appreciate his vision,

The author wishes to express his deepest sense of gratitude, sincere appreciation, indebtedness and profound regards to his respected teacher and reverend supervisor, Goutam Kumar

Thanks and special appreciation is given to my supervisor Dr Wan Adilah Wan Adnan and Puan Natrah Abdullah@Dolah, for their advice, motivation, criticism, guidance and ideas during the