• Tidak ada hasil yang ditemukan

CERTIFICATION OF APPROVAL - UTPedia

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2024

Membagikan "CERTIFICATION OF APPROVAL - UTPedia"

Copied!
2
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 2 Halaman )

Teks penuh

(1)

CERTIFICATION OF APPROVAL

Of Research Project

DEVELOPMENT OF FAULT TREE ANALYSIS FOR COOLING WATER SYSTEM USING SPREADSHEET : A CASE STUDY

By

MOHD ZULKARNAIN BIN HASHIM

A project dissertation submitted to the Mechanical Engineering Programme

Universiti Teknologi PETRONAS in partial fulfilment of the requirement for the

BACHELOR OF ENGINEERING (Hons) (MECHANICAL ENGINEERING)

Approved by,

___________________________________

(DR. AINUL AKMAR MOKHTAR)

UNIVERSITI TEKNOLOGI PETRONAS TRONOH, PERAK

SEPTEMBER 2012

(2)

CERTIFICATION OF ORIGINALITY

With this I clarify that this report was originally produced except the specified references and acknowledgement and the original work contained herein have not been undertaken or done by unspecified sources or persons.

_______________________________________

(MOHD ZULKARNAIN BIN HASHIM) Mechanical Engineering Department, Universiti Teknologi PETRONAS.

Referensi

Unduh sekarang ( PDF - 2 Halaman - 8.53 KB )

Dokumen terkait

TABLE OF CONTENTS

CERTIFICATION OF APPROVAL Analysis of High Frequency Transformer Design in Converter Application Approved: Project Supervisor by Fathiah Zakaria A project dissertation submitted

method of locating failure of street lighting - UTPedia

CERTIFICATION OF APPROVAL METHOD OF LOCATING FAILURE STREET LIGHTING Approved: by Emi Zurima Bt Ismail A project dissertation submitted to the Electrical & Electronics

CERTIFICATION OF APPROVAL - UTPedia

LIST OF FIGURES Figure 3.1 Overview of the Methodology 12 Figure 3.2 Silica sand contains moisture 14 Figure 3.3 Dried up sample in oven 15 Figure 3.4 Arrangement of pans during

of of of

CERTIFICATION OF APPROVAL Dynamic Characteristics of a Hybrid Composite Drive Shaft for Automotive Application Approved by, By Mohd Madzhir b Ibrahim A project dissertation

Feasibility Study of Graphics Rendering in Cloud - UTPedia

CERTIFICATION OF APPROVAL Feasibility Study of Graphics Rendering in Cloud by TanKahMeng A project dissertation submitted to the Information and Communication Technology Programme

Bonding characteristics of Self Compacting Geopolymer ... - UTPedia

Approved by, CERTIFICATION OF APPROVAL Bonding characteristics of Self Compacting Geopolymer Concrete through Pull Out Test By Amatillah Sakinah binti Abd Rahain A project

CERTIFICATION OF APPROVAL - UTPedia

39 Based on all the graphs above, the potential environmental impacts for both life cycles can be summarized as per Table 12 below: Table 12: Environmental Impacts for Life Cycle of

certification of approval - UTPedia

LIST OF TABLES Table 1: Table 2: Table3: Table 4 Table 5: Table 6: Table 7: Table 8: Table 9: Table 10: Table II: Table 12: Table 13: Earthquakes Felt In Malaysia Result