• Tidak ada hasil yang ditemukan

Characterization of Cu2

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2024

Membagikan "Characterization of Cu2"

Copied!
1
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 1 Halaman )

Teks penuh

(1)

Characterization of Cu

2

O thin films with addition of additive prepared by sol-gel spin coating process

Abstract

Cuprous Oxide (Cu2O) thin films were formed onto indium tin oxide (ITO) coated glass substrate by sol-gel spin coating technique using different additives namely polyethylene glycol and ethylene glycol. It was found that the organic additives added had a significant influenced on the formation mechanism of Cu2O films and lead to different microstructures and optical properties. The films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and ultraviolet- visible spectroscopy (UV-Vis). Based on the FESEM micrographs the grain size of film prepared by polyethylene glycol has smaller grain of about 83 nm with irregular shape.

The highest optical absorbance was obtained by the addition of polyethylene glycol.

Referensi

Unduh sekarang ( PDF - 1 Halaman - 7.29 KB )

Dokumen terkait

Effect of Annealing Temperature On Iron Doped Titanium Dioxide Thin Films Prepared By Spin Coating Technique.

Increasing the annealing temperature of the iron doped titanium dioxide thin films prepared by spin coating method causes changes in crystal structure and morphology of

Aplikasi ZnO pada Sel Surya .pdf

Metode fabrikasi yang digunakan untuk penumbuhan ZnO adalah metode sol-gel spin coating yaitu dengan penumbuhan lapisan tipis pada substrat dengan meneteskan cairan

Graphene Oxide Based on Biomass Waste: Synthesis and Applications

Reduced GO/polyaniline PANI composite multilayer films were prepared as electrode materials for electrochromic devices to replace conventional indium tin oxide ITO The fabrication

Synthesis and Characterization of Nanostructural Cds Thin Film Using Spin Coating Technique for Photodetector Application

This article, thin films of cadmium sulfide nanocrystals CdS”were prepared by “Spin Coating” technology deposited on the glass substrates with various concentrations of Cd and S 0.5,

Preparation and Characterization of CTAB Surfactant Modified TiO2 Nanoparticles as Antibacterial Fabric Coating Material

"Synthesis of nanocrystalline photocatalytic TiO"2 thin films and particles using sol-gel method modified with nonionic surfactants", Thin Solid Films, 20060703 Publication ebin.pub

Pulsed Laser Deposited Indium Tin Oxide and its Indium-rich Composite Thin Films as Efficient Material Platforms for Probing Epsilon-near-zero Plasmon and Lossy Mode Resonance via Kretschmann-Raether Geometry

SHORT ABSTRACT In the present thesis work, epsilon-near-zero ENZ plasmon resonance and lossy mode resonance LMR properties of pulsed laser deposited indium tin oxide ITO thin films

rich Composite Thin Films as Efficient Material Platforms for Probing Epsilon-near-zero Plasmon and Lossy Mode

Abstract In the present thesis work, epsilon-near-zero ENZ plasmon resonance and lossy mode resonance LMR properties of pulsed laser deposited indium tin oxide ITO thin films and

(1)74 The effects of different electron transport layer materials on the photovoltaic properties of flexible and printed perovskite solar cells Yerassyl Yerlanuly1*, Hryhorii P

This work is dedicated to fabricate PSCs on the surface of flexible polyethylene terephthalate with a layer of transparent conducting indium-tin-oxide PET/ITO using a slot-die coating