• Tidak ada hasil yang ditemukan

Design and development of sensing system for mines detector robot

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2024

Membagikan "Design and development of sensing system for mines detector robot"

Copied!
1
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 1 Halaman )

Teks penuh

(1)

Key Engineering Materials, vol.594-595, 2014, pages 924-929

Design and development of sensing system for mines detector robot

Abstract

This paper presents the design and development of sensing system for mines detector robot.

The objective of this project is to identify the optimum metal detection system and design and develop the sensing system of mines detection circuit for the landmine mobile robot. This sensing circuit of landmines detection system consists of pulse generation circuit, detector circuit, amplifier circuit, comparator circuit, microcontroller PIC18F4580 and the display result circuit through LCD screen. Size, type and shape of ferrous and non-ferrous object (landmines) will impinge on the output voltage signal from the search coil. The metal (iron) that was targeted in this project will be chosen based on an artificial detonator. Experimental results showed that this circuit able to sense ferrous and non-ferrous object (landmines) with satisfy sensitivity and consistent result.

Keywords; Ferrous Object, Metal Detection Sensing System, Non-Ferrous Object, Pulse Induction

Referensi

Unduh sekarang ( PDF - 1 Halaman - 129.02 KB )

Dokumen terkait

Application of Stochastic Resonance of the Single-mode Nonlinear Optical System in Spectrum Sensing of Cognitive Radio Networks

Because the stochastic resonance system can improve the energy detection system output SNR .To improve the spectrum sensing performance of cognitive radio networks in the low

Design of the Old Age Living Room Based on the Interconnection of Multi Agent

The home security system module in the Android mobile phone mainly consists of three parts, such as perception and detection module comprising infrared sensor, smoke detector,

Development Of Lab Kit For Control Of Pneumatic System.

a) To design a practical pneumatic circuit system. b) To build interactive mechanism of pneumatic simulator. c) To integrate both pneumatic circuit and simulator system.. 1.4

Design And Development Of A Convenient Air-Conditional Room.

So this project is about design and develop a low budget of self-adjusted room condition controller circuit by using microcontroller to control room’s temperature

Design and Development of Jitter Measurement Circuit for High-Speed SerDes System using 65 nm CMOS Process

To accomplish the proposed jitter measurement method, a pulse width generator, a transition region scanner, a phase shifter, and, a jitter-to-voltage converter circuit is developed..

Design and Development of Polyfluorene Based Conjugated Polyelectrolytes for Sensing Applications

Chapter II highlighted the synthesis and characterization of conjugated polymer nanoparticles for the selective and sensitive detection of PA on multiple platforms including including

Design and Analysis of Impulse Radio (IR) Based UWB Transmitter with Antenna

The whole circuit having CSVCO, OOK modulator, Gaussian pulse generator, differentiator and differential amplifier was co-simulated with UWB antenna using ADS software but the last two

Review and design of environmental smart detector for autonomous vehicle in urban traffic

This system is being implemented to urban traffic in about 40 km/h maximum speed Keyword s— Autonomous vehicle, environment detector, ultrasonic array, range finder INTRODUCTION