• Tidak ada hasil yang ditemukan

Tensile strength of untreated napier grass fibre reinforced unsaturated polyester composites

N/A
N/A
Protected

Academic year: 2024

Membagikan "Tensile strength of untreated napier grass fibre reinforced unsaturated polyester composites"

Copied!
1
0
0

Teks penuh

(1)

Applied Mechanics and Materials, vol. 554, 2014, pages 189-193

Tensile strength of untreated napier grass fibre reinforced unsaturated polyester composites

Abstract

This paper describes the experimental investigation of the tensile strength of untreated Napier grass fibre reinforced polyester composites. Napier grass fibres were extracted trough conventional water retting process and used as reinforcing materials in the polyester composite laminates. Tensile tests were then conducted for the composite specimens from the laminates at 25% fibre loading using the electronic extensometer setup to obtain the tensile properties. The results show significant differences in tensile strength between random short fibres laminates and random long fibre laminates with the long fibres yield almost 45 % higher in the strength. The laminates also show higher maximum strength compared to other commonly available natural fibre composites with over 70 % increase in the maximum strength compared to the short kenaf fibre reinforced composites.

Keywords — Napier grass fibre, tensile strength, long fibre, short fibre, natural composites

Referensi

Dokumen terkait

EFFECTS OF CURING ANGLE ON LAMINATED UNSATURATED POLYESTER / EPOXY COMPOSITES STRUCTURES.. Tan

Martin, The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 – polyester resin matrix ,

 The tensile strength and elastic modulus of fiber/PLA composites increased after NaOH treatment and decreased after DAP treatment compared to that of

Alkali Treatment of Screw Pine ( Pandanus Odoratissimus ) Fibers and Its Effect on Unsaturated Polyester Composites.. Hairul Abral 1

In this study, the tensile properties of abaca fibre reinforced high impact polystyrene (HIPS) composites, which had been produced with the parameters of fibre loading (30,40,50

The empty fruit bunch (EFB) fibre, natural fibre was combined with unsaturated polyester resin matrix, to produce advance structural composite.. An experimental

In Japan, the production of these types of composites such as high performance fibre-reinforced cement- based composite HPFRCB, ultra high performance UHPFRCB and strain-hardening SHCC

Machinability study of glass fibre-reinforced polymer composites during end milling Abstract Machining of composite materials is usually performed to achieve required geometrical