UNIVERSITI TEKNOLOGI MARA
DESIGN AN ELECTRONIC AZAN CLOCK, READER AND RINGER
MOHAMMAD EKMAL MOHAMMAD HATTA AZHAR SAFFUAN RAMLI
DESIGN AN ELECTRONIC AZAN CLOCK, READER AND RINGER
by
MOHAMMAD EKMAL MOHAMMAD HATTA AZHAR SAFFUAN RAMLI
Report is submitted as the requirement for Diploma Of Electrical Engineering
UNIVERSITI TEKNOLOGI MARA 2005
TABLE OF CONTENTS: PAGE
ACKNOWLEDGEMENT AES' 1 RACT
CHAPTER
1 INTRODUCTION
1.1 BACKGROUND 1
1.2 OBJECTIVE 2
1.3 SCOPE OF WORK 3
THE SOFTWARE
2.1 INTRODUCTION 5
2.2 SOFTWARE DEVELOPMENT 5
2.3 SOFTWARE OPERATION 7
2.4 CONCLUSION 10
HARDWARE IMPLEMENTATION
3.1 INTRODUCTION
1 1
3.2 CONSTRUCTION AND CIRCUIT OPERATION 12
3.3 USER MANUAL 24
3.4 COMPONENT USED IN THE PROJECT 25
4 RESULT AND DISCUSSION
4.1 DISCUSSION AND RECOMMENDATION 31
4.2 SUGGESTION FOR THE FUTURE WORK 31
ACKNOWLEDGEMENT
In the name of Allah SWT The Most Gracious and Most Merciful. Syukur Alhamdulillah thanks to Allah that give to us energy and strength also the opportunity to complete this project KKIJ 2X0 successfully. Our sincerest must be extended to our project lecturer. Kn Muhammad Khusairi bin Osman for all the help, guidance and patience during the process of completing the project. Not forgetting to most friends that help us most of the time through in some problem. We are very grateful for all the kind of help we achieve in making the project and report. Information and knowledge is what we lack in our way to achieve gold in project, and the only way to solve it is by get the information from newspaper and magazine. All the useful information that we achieve thought this project, we use it as much as we can to make use for the best that it can. Thank to everybody that 1 had provided us with such information, and surely your information is sure enough satisfy our need and useful throughout completing this project. To our parents, surely enough we must thank them a lot for the moral and the most important thing, to provide us with financial support. To all people that we forget to mention, please forgive us, we do appreciate ail things that you all have done for us.
i
ABSTRACT
The purpose of this project is to design an electronic azan clock, reader and ringer. It can divide into two part, software and hardware parts. For software part, a program for azan reader and ringer was developed using Microsoft Visual Basic. And for hardware part a digital clock is circuit is that have to function as a ringer and an azan reader. Audio signal is a common thing that uses this amplifier to produce sound wave through a transducer such as speaker. Compare to the common digital clock, it can be programmed by users to set live different alarm time refer to azan time. The digital electronic azan clock will automatically produce azan for each time it is set to. This digital clock is designed for Muslim and it is very useful for them. Besides, this clock will alert them when it is time to pray. Therefore, they absolutely won’t miss their pray. The advantages of this azan clock reader and linger were designed with a basic design, to provide ease of constructing, troubleshooting, and low power consumption.
li
