Morphological, Thermal and Mechanical Properties of Epoxidized Soil Bean Plasticized Polylactic Acid/Graphene Nanocomposites
Teks penuh
Dokumen terkait
[r]
This research is to investigate the morphological and mechanical properties of thermoplastic vulcanizates, polypropylene/epoxidized natural rubber (PP/ENR) when
As can be seen, the presence of different loading of MWCNTs filler in the matrix of PP even at a lower percentages of weight, is still capable to keep retain the pattern of the
JMMM Wollastonite and talc reinforced polypropylene hybrid composites: Mechanical, morphological and thermal properties Naruedee PHUTFAK1, and Amnouy LARPKASEMSUK1,* 1 Department
In Bronze filled PLA young’s modulus reaches maximum of 1.9 GPa for the layup speed 45 mm/Min and layer height 0.4mm and has minimal of 1.08 GPa for the layup speed 55mm/Min and layer
Small loading of glycerol plasticizer 1% wt has improved the mechanical properties of the chitosan-pristine graphene up to 0.4% wt due to the homogeneous dispersion of pristine graphene
VOLUME 9, ISSUE 2, SEPTEMBER 2023, 73 – 79 DOI: https://doi.org/10.15282/jceib.v9i2.10008 RESEARCH ARTICLE Mechanical, thermal, and morphological properties of polylactic acid PLA/
The bound rubber content, Payne effect and dynamic properties as well as filler dispersion in natural rubber composites with silica and carbon black are compared with and without
