Even thought, the proposed method has shown promising results, however, it’s worth to mentions that, some aspects that might be considered in future for further study are presented as follows:
• The effect of the temperature in the SOC estimation, was ignored in this work. But it’s a rising area of research for the upcoming years. The effect of the temperature could also be implied in the identification of the parameters of the battery, especially if the model become more complex, with addition of more resistors, which will lead to more losses, and the effect of heat could lead to misleading measurements if the used sensors were not sensitive enough.
• In the battery model identification, the capacitors results were always having a little bit percentage of error, more the than the resistor, this could be happened due to the nonlinear nature of the capacitor, or/and the differential equation that would represent the capacitor in the estimation process. And since the supercapacitor are the new era of the storage devices, the upcoming decades will have an enormous research in advancing the nature of the capacitor, and its overall functionality in the power system application.
66
References
[1] R. R. Gogula, "A sustainable hybrid/ off grid power generation systems suitable for a remote coastal area in Oman," 2015 IEEE 8th GCC Conference & Exhibition, Muscat, 2015, pp. 1-6.
[2] M. S. Alam and D. W. Gao, "Modeling and Analysis of a Wind/PV/Fuel Cell Hybrid Power System in HOMER," 2007 2nd IEEE Conference on Industrial Electronics and Applications, Harbin, 2007, pp. 1594-1599.
[3] A. T. Mohamed, M. A. M. Salim and M. M. Almuhaini, "Reliability assessment and feasibility study for an industrial facility with the integration of hybrid renewable energy system," 2017 International Conference on Communication, Control, Computing and Electronics Engineering (ICCCCEE), Khartoum, 2017, pp. 1-6.
[4] “Best phone battery life 2018.” [Online].
Available: http://www.expertreviews.co.uk/mobile-phones/1402071/best-phone- battery-life. [Accessed: 20-Mar-2018].
[5] “Recent Electric Vehicles,” in Electric Vehicle Technology Explained, Chichester, UK: John Wiley & Sons, Ltd, 2012, pp. 271–290.
[6] Y. Wang, Z. Han and J. Shi, "One cell Lithium-ion battery protection IC," 2014 9th IEEE Conference on Industrial Electronics and Applications, Hangzhou, 2014, pp.
1427-1432.
67
[7] Z. Ye, X. Wu, Y. Sun and J. Lu, "A Universal Protection Controller for Li-ion Battery Charger," 2010 Asia-Pacific Power and Energy Engineering Conference, Chengdu, 2010, pp. 1-4.
[8] Z. Rao and S. Wang, "A review of power battery thermal energy management", Renewable and Sustainable Energy Reviews, vol. 15, no. 9, pp. 4554-4571, 2011.
[9] C. Fleischer, W. Waag, H. Heyn and D. Sauer, "On-line adaptive battery impedance parameter and state estimation considering physical principles in reduced order equivalent circuit battery models", Journal of Power Sources, vol. 260, pp. 276- 291, 2014.
[10] D. V. Cadar, D. M. Petreus, and C. A. Orian, “A method of determining a lithium- ion battery’s state of charge,” in 2009 15th International Symposium for Design and Technology of Electronics Packages (SIITME), pp. 257–260, 2009.
[11] R. Hu, “Battery Management System For Electric Vehicle Applications,”, M.A.Sc dissertation, Dept. Electrical and Computer Engineering, University of Windsor.
2011.
[12] H. Chen, T. Cong, W. Yang, C. Tan, Y. Li and Y. Ding, "Progress in electrical energy storage system: A critical review", Progress in Natural Science, vol. 19, no.
3, pp. 291-312, 2009.
[13] K. Divya and J. Østergaard, "Battery energy storage technology for power systems—An overview", Electric Power Systems Research, vol. 79, no. 4, pp. 511- 520, 2009.
68
[14] X. Luo, J. Wang, M. Dooner and J. Clarke, "Overview of current development in electrical energy storage technologies and the application potential in power system operation", Applied Energy, vol. 137, pp. 511-536, 2015.
[15] A. Satapathy, M. Das, and A. Samanta, “A Comprehensive Study on Battery Management System and Dynamic Analysis of Lithium Polymer Battery,” , M.Tech. dissertation, Dept. of Electrical Engineering, National Institute of Technology Rourkela,2016.
[16] L. Lu, X. Han, J. Li, J. Hua, and M. Ouyang, “A review on the key issues for lithium-ion battery management in electric vehicles,” J. Power Sources, vol. 226, pp. 272–288, 2013.
[17] “Lithium Battery Failures.” [Online]. Available:
http://www.mpoweruk.com/lithium_failures.htm. [Accessed: 02-Jan-2017].
[18] L. Maharjan, S. Inoue, H. Akagi and J. Asakura, "State-of-Charge (SOC)- Balancing Control of a Battery Energy Storage System Based on a Cascade PWM Converter," in IEEE Transactions on Power Electronics, vol. 24, no. 6, pp. 1628- 1636, June 2009.
[19] J. Lee, O. Nam and B. Cho, "Li-ion battery SOC estimation method based on the reduced order extended Kalman filtering", Journal of Power Sources, vol. 174, no.
1, pp. 9-15, 2007.
[20] T. Hansen and C. J. Wang, “Support vector based battery state of charge estimator,”
J. Power Sources, vol. 141, no. 2, pp. 351–358, 2005.
69
[21] J. Wang, B. Cao, Q. Chen, and F. Wang, “Combined state of charge estimator for electric vehicle battery pack,” Control Eng. Pract., vol. 15, no. 12, pp. 1569–1576, 2007.
[22] C. Zhang, J. Jiang, L. Zhang, S. Liu, L. Wang, and P. C. Loh, “A generalized SOC- OCV model for lithium-ion batteries and the SOC estimation for LNMCO battery,”
Energies, vol. 9, no. 11, 2016.
[23] J. H. Aylor, A. Thieme and B. W. Johnso, "A battery state-of-charge indicator for electric wheelchairs," in IEEE Transactions on Industrial Electronics, vol. 39, no.
5, pp. 398-409, Oct. 1992.
[24] Y. Yang, J. Liu, and C. Tsai, “Improved estimation of residual capacity of batteries for electric vehicles,” J. Chinese Inst. Eng., vol. 31, no. 2, pp. 313–322, Mar. 2008.
[25] V. Pop, H. Bergveld, D. Danilov, and P. Regtien, “Battery management systems:
Accurate state-of-charge indication for battery-powered applications”, Springer.
2008.
[26] V. Coroban, I. Boldea and F. Blaabjerg, "A novel on-line state-of-charge estimation algorithm for valve regulated lead-acid batteries used in hybrid electric vehicles,"
2007 International Aegean Conference on Electrical Machines and Power Electronics, Bodrum, pp. 39-46, 2007.
[27] H.J. Bergveld , V. Pop , P.H.L. Notten, “Method of estimating the State-of-Charge and of the use time left of a rechargeable battery, and apparatus for executing such a method”, U.S. Patent Application 10/598,038, filed June 26, 2008.
70
[28] H. Blanke, O. Bohlen, S. Buller, R. De Doncker, B. Fricke, A. Hammouche, D.
Linzen, M. Thele and D. Sauer, "Impedance measurements on lead–acid batteries for state-of-charge, state-of-health and cranking capability prognosis in electric and hybrid electric vehicles", Journal of Power Sources, vol. 144, no. 2, pp. 418-425, 2005.
[29] S. Rodrigues, N. Munichandraiah and A. Shukla, "A review of state-of-charge indication of batteries by means of a.c. impedance measurements", Journal of Power Sources, vol. 87, no. 1-2, pp. 12-20, 2000.
[30] J. Xu, C. Mi, B. Cao and J. Cao, "A new method to estimate the state of charge of lithium-ion batteries based on the battery impedance model", Journal of Power Sources, vol. 233, pp. 277-284, 2013.
[31] W. Waag, S. Käbitz and D. Sauer, "Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application", Applied Energy, vol. 102, pp. 885-897, 2013.
[32] S. Nejad, D. T. Gladwin and D. A. Stone, "Sensitivity of lumped parameter battery models to constituent parallel-RC element parameterisation error," IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, 2014, pp. 5660-5665.
[33] R. Xiong, H. He, F. Sun, X. Liu and Z. Liu, "Model-based state of charge and peak power capability joint estimation of lithium-ion battery in plug-in hybrid electric vehicles", Journal of Power Sources, vol. 229, pp. 159-169, 2013.
71
[34] J. Li, J. Klee Barillas, C. Guenther and M. Danzer, "A comparative study of state of charge estimation algorithms for LiFePO4 batteries used in electric vehicles", Journal of Power Sources, vol. 230, pp. 244-250, 2013.
[35] H. He, R. Xiong and J. Fan, "Evaluation of Lithium-Ion Battery Equivalent Circuit Models for State of Charge Estimation by an Experimental Approach", Energies, vol. 4, no. 4, pp. 582-598, 2011.
[36] M. Coleman, C. K. Lee, C. Zhu and W. G. Hurley, "State-of-Charge Determination From EMF Voltage Estimation: Using Impedance, Terminal Voltage, and Current for Lead-Acid and Lithium-Ion Batteries," in IEEE Transactions on Industrial Electronics, vol. 54, no. 5, pp. 2550-2557, Oct. 2007.
[37] F. Baronti, G. Fantechi, L. Fanucci, E. Leonardi, R. Roncella, R. Saletti, S.
Saponara, "State-of-charge estimation enhancing of lithium batteries through a temperature-dependent cell model," 2011 International Conference on Applied Electronics, Pilsen, 2011, pp. 1-5.
[38] F. Auger, M. Hilairet, J. M. Guerrero, E. Monmasson, T. Orlowska-Kowalska and S. Katsura, "Industrial Applications of the Kalman Filter: A Review," in IEEE Transactions on Industrial Electronics, vol. 60, no. 12, pp. 5458-5471, Dec. 2013 [39] C. R. Gould, C. M. Bingham, D. A. Stone and P. Bentley, "New Battery Model and
State-of-Health Determination Through Subspace Parameter Estimation and State- Observer Techniques," in IEEE Transactions on Vehicular Technology, vol. 58, no.
8, pp. 3905-3916, Oct. 2009.
72
[40] A. El Mejdoubi, A. Oukaour, H. Chaoui, H. Gualous, J. Sabor and Y. Slamani,
"State-of-Charge and State-of-Health Lithium-Ion Batteries’ Diagnosis According to Surface Temperature Variation," in IEEE Transactions on Industrial Electronics, vol. 63, no. 4, pp. 2391-2402, April 2016.
[41] Z. Chen, Y. Fu and C. C. Mi, "State of Charge Estimation of Lithium-Ion Batteries in Electric Drive Vehicles Using Extended Kalman Filtering," in IEEE Transactions on Vehicular Technology, vol. 62, no. 3, pp. 1020-1030, March 2013.
[42] R. Xiong, F. Sun, Z. Chen and H. He, "A data-driven multi-scale extended Kalman filtering based parameter and state estimation approach of lithium-ion olymer battery in electric vehicles", Applied Energy, vol. 113, pp. 463-476, 2014.
[43] C. Hu, B. Youn and J. Chung, "A multiscale framework with extended Kalman filter for lithium-ion battery SOC and capacity estimation", Applied Energy, vol.
92, pp. 694-704, 2012.
[44] X. Hu, S. Li, H. Peng and F. Sun, "Robustness analysis of State-of-Charge estimation methods for two types of Li-ion batteries", Journal of Power Sources, vol. 217, pp. 209-219, 2012.
[45] J. Kim and B. H. Cho, "State-of-Charge Estimation and State-of-Health Prediction of a Li-Ion Degraded Battery Based on an EKF Combined with a Per-Unit System,"
in IEEE Transactions on Vehicular Technology, vol. 60, no. 9, pp. 4249-4260, Nov.
2011.
73
[46] J. Kim, S. Lee and B. H. Cho, "Complementary Cooperation Algorithm Based on DEKF Combined With Pattern Recognition for SOC/Capacity Estimation and SOH Prediction," in IEEE Transactions on Power Electronics, vol. 27, no. 1, pp. 436- 451, Jan. 2012.
[47] S. Yuan, H. Wu and C. Yin, "State of Charge Estimation Using the Extended Kalman Filter for Battery Management Systems Based on the ARX Battery Model", Vol. 6, No. 1, pp. 444-470, 2016.
[48] B. S. Bhangu, P. Bentley, D. A. Stone and C. M. Bingham, "Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles," 2005 IEEE Vehicle Power and Propulsion Conference, Chicago, IL, 2005.
[49] Z. He, M. Gao, C. Wang, L. Wang and Y. Liu, "Adaptive State of Charge Estimation for Li-Ion Batteries Based on an Unscented Kalman Filter with an Enhanced Battery Model", Vol.6, No.8, pp 4134-4151, 2013.
[50] H. Aung, K. Soon Low and S. Ting Goh, "State-of-Charge Estimation of Lithium- Ion Battery Using Square Root Spherical Unscented Kalman Filter (Sqrt-UKFST) in Nanosatellite," in IEEE Transactions on Power Electronics, vol. 30, no. 9, pp.
4774-4783, Sept. 2015.
[51] G. Plett, "Sigma-point Kalman filtering for battery management systems of LiPB- based HEV battery packs", Journal of Power Sources, vol. 161, no. 2, pp. 1369- 1384, 2006.
74
[52] J. Meng, G. Luo and F. Gao, "Lithium Polymer Battery State-of-Charge Estimation Based on Adaptive Unscented Kalman Filter and Support Vector Machine," in IEEE Transactions on Power Electronics, vol. 31, no. 3, pp. 2226-2238, March 2016.
[53] A. Zenati, P. Desprez and H. Razik, "Estimation of the SOC and the SOH of li-ion batteries, by combining impedance measurements with the fuzzy logic inference,"
IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, Glendale, AZ, pp. 1773-1778, 2010.
[54] C. Hametner and S. Jakubek, "State of charge estimation for Lithium Ion cells:
Design of experiments, nonlinear identification and fuzzy observer design", Journal of Power Sources, vol. 238, pp. 413-421, 2013.
[55] W. Chang, "Estimation of the state of charge for a LFP battery using a hybrid method that combines a RBF neural network, an OLS algorithm and AGA", International Journal of Electrical Power & Energy Systems, vol. 53, pp. 603-611, 2013.
[56] X. Chen, W. Shen, M. Dai, Z. Cao, J. Jin and A. Kapoor, "Robust Adaptive Sliding- Mode Observer Using RBF Neural Network for Lithium-Ion Battery State of Charge Estimation in Electric Vehicles," in IEEE Transactions on Vehicular Technology, vol. 65, no. 4, pp. 1936-1947, April 2016.
[57] A. Jossen, "Fundamentals of battery dynamics", Journal of Power Sources, vol.
154, no. 2, pp. 530-538, 2006.
75
[58] J. Remmlinger, M. Buchholz, T. Soczka-Guth and K. Dietmayer, "On-board state- of-health monitoring of lithium-ion batteries using linear parameter-varying models", Journal of Power Sources, vol. 239, pp. 689-695, 2013.
[59] Z. He, Y. Liu, M. Gao and Caisheng Wang, "A joint model and SOC estimation method for lithium battery based on the sigma point KF," 2012 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, pp. 1- 5, 2012.
[60] P. Gregory,"Dual and joint EKF for simultaneous SOC and SOH estimation." In Proceedings of the 21st Electric Vehicle Symposium (EVS21), Monaco, pp. 1-12.
2005.
[61] G. Plett, "Recursive approximate weighted total least squares estimation of battery cell total capacity", Journal of Power Sources, vol. 196, no. 4, pp. 2319-2331, 2011.
[62] X. Hu, F. Sun, Y. Zou and H. Peng, "Online estimation of an electric vehicle Lithium-Ion battery using recursive least squares with forgetting," Proceedings of the 2011 American Control Conference, San Francisco, CA, pp. 935-940, 2011.
[63] H. He, X. Zhang, R. Xiong, Y. Xu and H. Guo, "Online model-based estimation of state-of-charge and open-circuit voltage of lithium-ion batteries in electric vehicles", Energy, vol. 39, no. 1, pp. 310-318, 2012.
[64] T. Kim and W. Qiao, "A Hybrid Battery Model Capable of Capturing Dynamic Circuit Characteristics and Nonlinear Capacity Effects," in IEEE Transactions on Energy Conversion, vol. 26, no. 4, pp. 1172-1180, Dec. 2011.
76
[65] E. Krüger, Q. T. Tran and K. Mamadou, "Normalized least mean squares observer for battery parameter estimation," 2015 IEEE Eindhoven PowerTech, Eindhoven, pp. 1-6, 2015.
[66] Li Xue, Jiang Jiuchun, Zhang Caiping, Zhang Weige and Sun Bingxiang, "Effects analysis of model parameters uncertainties on battery SOC estimation using H- infinity observer," 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE), Istanbul, pp. 1647-1653, 2014.
[67] I. Kim, "The novel state of charge estimation method for lithium battery using sliding mode observer", Journal of Power Sources, vol. 163, no. 1, pp. 584-590, 2006.
[68] P. Kumar and P. Bauer, "Parameter extraction of battery models using multiobjective optimization genetic algorithms," Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC, Ohrid, pp. 106- 110, 2010.
[69] X. Hu, S. Li and H. Peng, "A comparative study of equivalent circuit models for Li-ion batteries", Journal of Power Sources, vol. 198, pp. 359-367, 2012.
[70] H. Shareef, M. M. Islam, and A. Mohamed, “A review of the stage-of-the-art charging technologies, placement methodologies, and impacts of electric vehicles,”
Renew. Sustain. Energy Rev., vol. 64, pp. 403–420, 2016.
77
[71] J. Y. Yong, V. K. Ramachandaramurthy, K. M. Tan, and N. Mithulananthan, “A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects,” Renewable. Sustainable Energy., vol. 49, pp. 365–385, 2015.
[72] C. H. Dharmakeerthi, N. Mithulananthan and T. K. Saha, "Modeling and planning of EV fast charging station in power grid," 2012 IEEE Power and Energy Society General Meeting, San Diego, CA, pp. 1-8, 2012
[73] Chih-Chiang Hua and Meng-Yu Lin, "A study of charging control of lead-acid battery for electric vehicles," ISIE'2000. Proceedings of the 2000 IEEE International Symposium on Industrial Electronics (Cat. No.00TH8543), Cholula, Puebla, Mexico, pp. 135-140 vol.1, 2000.
[74] “Battery Chargers and Charging Methods.” [Online]. Available:
http://www.mpoweruk.com/chargers.htm#pulse. [Accessed: 13-Nov-2016].
[75] S. Li, C. Zhang, and S. Xie, “Research on fast charge method for lead-acid electric vehicle batteries,” 2009 Int. Work. Intell. Syst. Appl. ISA 2009, pp. 1–5, 2009.
[76] N., Tho, and Linda Bushnell. "Advanced Battery Charging Techniques: Pulse- Charging in Large-Scale Applications-Design of Divide and Conquer Technique for High-Capacity Batteries." Technical Report (2003).
[77] L. Chen, "Design of Duty-Varied Voltage Pulse Charger for Improving Li-Ion Battery-Charging Response," in IEEE Transactions on Industrial Electronics, vol.
56, no. 2, pp. 480-487, Feb. 2009.
78
[78] Y. S. Chu, R. Y. Chen, T. J. Liang, S. K. Changchien and J. F. Chen,
"Positive/negative pulse battery charger with energy feedback and power factor correction," Twentieth Annual IEEE Applied Power Electronics Conference and Exposition,. APEC 2005., Austin, TX, Vol. 2, pp. 986-990, 2005.
[79] S. Falahati, S. A. Taher, and M. Shahidehpour, “A new smart charging method for EVs for frequency control of smart grid,” Int. J. Electronics. Power Energy Syst., vol. 83, pp. 458–469, 2016.
[80] S. Malkhandi, "Fuzzy logic-based learning system and estimation of state-of- charge of lead-acid battery", Engineering Applications of Artificial Intelligence, vol. 19, no. 5, pp. 479-485, 2006.
[81] S. A. Taher, M. Hajiakbari Fini, and S. Falahati Aliabadi, “Fractional order PID controller design for LFC in electric power systems using imperialist competitive algorithm,” Ain Shams Eng. J., vol. 5, no. 1, pp. 121–135, 2014.
[82] I. G. Damousis, A. G. Bakirtzis and P. S. Dokopoulos, "A solution to the unit- commitment problem using integer-coded genetic algorithm," in IEEE Transactions on Power Systems, vol. 19, no. 2, pp. 1165-1172, May 2004.
[83] B. Yagcitekin and M. Uzunoglu, “A double-layer smart charging strategy of electric vehicles taking routing and charge scheduling into account,” Appl. Energy, vol. 167, pp. 407–419, 2016.
79
[84] A. S. Masoum, S. Deilami, P. S. Moses, M. A. S. Masoum, and A. Abu-Siada,
“Smart load management of plug-in electric vehicles in distribution and residential networks with charging stations for peak shaving and loss minimisation considering voltage regulation,” IET Gener. Transm. Distrib., vol. 5, no. 8, p. 877, 2011.
[85] A. D. Hilshey, P. Rezaei, P. D. H. Hines and J. Frolik, "Electric vehicle charging:
Transformer impacts and smart, decentralized solutions," 2012 IEEE Power and Energy Society General Meeting, San Diego, CA, pp. 1-8, 2012.
[86] M. A. S. Masoum, P. S. Moses, and S. Hajforoosh, “Distribution transformer stress in smart grid with coordinated charging of plug-in electric vehicles,” 2012 IEEE PES Innovation. Smart Grid Technol. ISGT 2012, pp. 1–8, 2012.
[87] G. Razeghi, L. Zhang, T. Brown, and S. Samuelsen, “Impacts of plug-in hybrid electric vehicles on a residential transformer using stochastic and empirical analysis,” J. Power Sources, vol. 252, pp. 277–285, 2014.
[88] E. Ramos Muñoz, G. Razeghi, L. Zhang, and F. Jabbari, “Electric vehicle charging algorithms for coordination of the grid and distribution transformer levels,” Energy, vol. 113, pp. 930–942, 2016.
80
Vitae
Name : Abdelhamed Tarig Abdelhamed Mohamed
Nationality : Sudanese
Date of Birth : 3/25/1992
Email : [email protected]
Address : Khartoum, Sudan, postal code: 11112 Academic Background : M.Sc. (Electrical Engineering), May 2018 King Fahd University of Petroleum and Minerals Dhahran, Saudi Arabia
B.Sc. (Electrical Engineering), October 2014 University of Khartoum, Sudan, 2014
Khartoum, Sudan
Publications : “Reliability Assessment and Feasibility Study for an Industrial Facility with the Integration of Hybrid Renewable Energy System”, Abdelhamed T. Mohamed, Mohammed Al-Hassan M. Salim, Mohammad M. Almuhaini, International Conference on Communication, Control, Computing and Electronics Engineering (ICCCCEE), Khartoum, Sudan, 2017.