TOOO, =
Pan 1: Correlations for fully developed turbulent flow - their scope and limitations"
Engineering Sciences Data, Item 67016.
Engineering Sciences Data Unit (1968), "Forced convection heat transfer in circular tubes.
Part 2: Data for laminar and transitional flows including free-convection effects", Engineering Sciences Data, Item 68006.
Foster, H.K. & Zuber, N. (1955), "Dynamics of vapour bubbles and boiling heat transfer", American Institution of Chemical Engineers Journal, I, 531-535.
CHAPTER 9 REFERENCES
Friedel, L. (1979), "Improved friction pressure drop correlation for horizontal and vertical two-phase pipe flow", Paper 2 -European Two-Phase Group Meeting, Ispra, Italy.
Genotelle, J. (1978), "Expressing the viscosity of sugar solutions", IndUSTries Alimentaires et Agricoles, 95, 747-755.
Gorenflo, D. (1994), "Behaltersieden" in VDl Warmeatlas, Section Ha, Seventh edition, Berlin: VDI-Verlag.
Gundrnundson, C. & 0lauson, L. (1971), "Harmful Pulsation Phenomena in a Climbing Film Evaporator With Superheated Feed", Svensk Papperstidning, 74(7-15),
197-200.
Gungor, K.E. & Winterton, R.H.S. (1986), "A general correlation for flow boiling in tubes and annuli", International Journal of Heat and Mass Transfer, 29, 351-358.
Gupra, A.S. & Holland, FA (1966a), "Heat Transfer Studies in a Climbing Filin Evaporator. Part I: Heat Transfer from Condensing Steam to Boiling Water",
Canadian Journal of Chemical Engineering, 44, 77-81.
Gupra, A.S. & Holland, FA (1966b), "Heat Transfer Studies in a Climbing Film Evaporator. Part ll: Heat Transfer Regions", Canadian Journal of Chemical Engineering, 44, 326-329.
Hetsroni, G. led] (1982), Handbook of Multiphase Systems, New York: Hemisphere Publishing Corporation.
Holland, FA & Bragg, R. (1995). Fluid Flow for Chemical Engineers, London: Edward Arnold, Chapter 7.
Ct-tAPn:R 9 RI!:"'ERENC~
Hughmark, G.A. (1969), "Designing thennosiphon reboilers", Chemical Engineering Progress, 65(7), 67-70.
Kadlec, P., Bretschneider, R. & Bubnik, Z. (1983), Chemical Engineering Communications, 21, 183-190.
Kenning, D.B.R. & Cooper, M.G. (1989), "Saturated flow boiling of water in vertical tubes", International Journal of Heat and Mass Transfer, 32, 445-458.
K1imenko,
v.v.
(1988), "A generalised correlation for two phase forced flow heat transfer" ,International Journal of Heat and Mass Transfer, 31, 541-552.Levenberg, K. (1944), "A method for the solution of certain problems in least squares", Quarterly of Applied Mathematics, 2,164-168.
Linden, C.M. & Montillon, G.H. (1930), Industrial and Engineering Chemistry, 22, 708- 713.
Lockhart, R.W. & Martinelli, R.C. (1949), "Proposed correlation of data for isothermal two phase, two component flow in pipes", Chemical Engineering Progress, 45(1), 39-48.
Lyle, O. (1950), Technology for Sugar Refinery Workers, London: Chapman and Hall Limited, Second Edition, p 472.
Marquardt, D.W. (1963), "An algorithm for least squares estimation of nonlinear pararneters",Joumal SIAM, 11, 431-441.
CHAPTER 9 REFERENCES
Mayinger, F. & Schult, M. (1981), "Dynamic behaviour of double phase-change heat exchangers", Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, Washington: Hemisphere Publishing Corporation, 955-979.
McNelly, M.J. (1953),Journal of the Imperial College Chemical Engineering Society, 7, 18.
Mills, A.F. (1992), Heat Transfer, Boston: lrwin, Chapter 7: "Condensation, evaporation and boiling".
Monrad, C.C. & Badger, W.L. (1930), "The condensation of vapours", Transactions of the American institution a/Chemical Engineers, 24, 84.
Muller-Steinhagen, H. (1995), Personal communication, Department of Chemical and Process Engineering, University of Surrey, Guildford, Surrey, GU2 5XH, United Kingdom.
Na, T.y. (1979), Computational methods in engineering boundary value problems, New York: Academic Press, 309 pp.
Peacock, SD. (1995a), "Selected physical properties of sugar factory process streams", Sugar Milling Research instilute Technical Report, 1714, 46 pp.
Peacock, S.D. (1995b), "Predicting physical properties of factory juices and syrups", International Sugar Journal, 97(1162), 571-577.
Peacock, SD. (1995c), "Data reconciliation as applied to the first effect factorial experiment data from the Felixton pilot plant evaporator", Sugar Milling Research Institute Technical Note, 47195, 5 pp.
CHAP'TER 9 REF"ERENCES
Peacock, S.D. (1996), "The optimisation of feed juice temperature for climbing film evaporators - A preliminary study", Sugar Milling Research Institute Technical NOle, 49/96, 7pp.
Peacock, SD. (1998), "Tools for the study of clear juice heating and its effect on climbing film evaporator operation", Sugar Milling Research Institute Technical Report, 1773,9 pp.
Piret, E.L. & Isbin, H.S. (1954), "Natural Circulation Evaporation: Two Phase Heat Transfer", Chemical Engineering Progress, 50(6), 305-311.
Premo]i, A., Francesco, D. & Prima (1970), "An empirical correlation for evaluating two- phase mixture density under adiabatic conditions", European Two-Phase Flow Group Meeting, Milan, 8-10 June 1970.
Rein, P.W. & Love, DJ. (1995), "Experiences With Long Tube Climbing Film Evaporators", Proceedings of the International Society of Sugar Cane Technologists' Conference, 22, Volume 1, 251-259.
Riedel, L. (1949), "Heat conductivity measurements in sugar solutions, fruit juices and milk", Chem. Ing. Technik, 21, 340-341.
Rohsenow, W.M. (1953), Heat Transfer: A Symposium, Chapter 4, Ann Arbor: University of Michigan Press.
Rohsenow, W.M. (1983), "Needed Research in Boiling Heat Transfer", Heal Transfer in Energy Problems, Washington : Hemisphere Publishing Corporation, 51-58.
Shah, M.M. (1982), "Chart correlation for saturated boiling heat transfer", ASHRAE Tramactions,88, 185-196.
CHAP>ER 9 REFERENCES
Smith, RA (1983), "Evaporators" in Heat exchanger design handbook, New York:
Hemisphere Publishing Corporation, pp 3.5.2-3.5.5.
Smith, RA (1986), Vaporisers: selection, design and operation, New York: Longman.
Starzak, M. & Peacock, S.D. (1997), "Water activity coefficient in aqueous solutions of sucrose -A comprehensive data analysis", Zuckerinduslrie, 122(5), 380-387.
Starzak, M. & Peacock, SD. (1998), "Boiling point elevation for aqueous solutions of sucrose -A comparison of different prediction methods", Zuckerindustrie, 123(6), 433-441.
Steiner, D. (1995), Personal communication, Universitat Karlsruhe, Postfach 6980, KaiserstraBe 12, D-76128, Karlsruhe, Germany.
Steiner, D. & Taborek, J. (1992), "Flow boiling heat transfer in vertical tubes correlated by an asymptotic method", Heal Transfer Engineering, 13, 43-69.
Stepban, K. (1995), Personal communication, Jnstitut filrTechnische Thermodyoamik und Thermische Verfahrenstechnik, Universitat Stuttgart, 70550, Stuttgart, Germany.
Tang,
c.L.
(1980), "Two phase flow in a climbing film evaporator", Canadian Journal of Chemical Engineering, 58, 425-430.Turner, J.M. (1966), "Annular two-phase flow", PbDThesis, Darmouth College, Hanover, New Hampshire, USA.
Wagner, W. (1973), Cryogenics, 13,470.
CHAPTER 9 REFERENCES
Wall is, G.B. (1969), One-dimensional two-phase flow, New York: McGraw Hill Book Company.
Waltbew, D.e. & Whitelaw, R. W. (1996), "Factors affectingtbe performance oflongtube climbing film evaporators", Proceedings o/the South African Sugar Technologists' Association. 70. 221-224.
Walthew, D.e., Whitelaw, R W. & Peacock, S.D. (1995), "Preliminary results from a long tube climbing film pilot evaporator", Proceedings of rhe Sourh African Sugar Technologists' Association. 69, 132-137.
Watson, L.1. (1989), "Heat transfer performance in evaporators. Pan I: Theory and mechanisms", Sugar Research Institute Technical Report. 191.
Webb, RL. & Gupte, N.S. (1992), "A critical review of correlations for convective vaporization in tubes and tube banks", Heal Transfer Engineering, 13, 58-81.
Winterton, R.H.S. (1981), Thermal Design of Nuclear Reacrors, Oxford: Pergamon Press, Chapter 5 : "Boiling Heat Transfer", 67-83.
Winterton, RH.S. (1995), Personal communication, School of Manufacturing and Mechanical Engineering, Binningham University, Birmingham, BI5 2TI, United Kingdom.
Zinemanas, D. (1983), "Simulation of heat transfer systems witb phase change", Msc TheSis. Technion - Israellnstitute of Technology.
Zinemanas, D., Hasson, D. & Kehat, E. (1984), "Simulation of heat exchangers with change of phase", Computers and Chemical Engineering, 8(6), 367-375.