• Tidak ada hasil yang ditemukan

Selecting Part of Natural Fiber EFB which has Best Mechanical Strength through Tensile Test Analysis for Composite Reinforced Material

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2017

Membagikan "Selecting Part of Natural Fiber EFB which has Best Mechanical Strength through Tensile Test Analysis for Composite Reinforced Material"

Copied!
13
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 13 Halaman )

Teks penuh

Loading

Gambar

Fig. properties of EFB fiber to make it suitable and
Fig. 5 Main stem fiber strand (BU)
TABLE I PSYSICAL PROPERTIES . Of EF8 .
Figure 13.14.anO 15.
+2

Referensi

Unduh sekarang ( PDF - 13 Halaman - 2.17 MB )

Garis besar

Selecting Part of Natural Fiber EFB which has Best Mechanical Strength through Tensile Test Analysis for Composite Reinforced Material

Dokumen terkait

A Study Of Mechanical Properties In Relation With Morphological Structure Of PP/Kenaf Fiber Reinforced Plastic Composite.

This research aims to study and analyze the effects of different fiber loading and coupling agent addition on the mechanical properties and its relationship to the micro

The Study of Mechanical Properties and Microstructure of Thermal-Curing Process on Natural Fiber (Kenaf) Reinforced Thermoset Composite.

The aims of this paperwork are to investigate the influence of the various exposure times and the various curing temperature on the mechanical properties and microstructure of the

Effect of chemical treatments on the tensile strength and flammability of paper mulberry fiber reinforced PLA composites.

 The tensile strength and elastic modulus of fiber/PLA composites increased after NaOH treatment and decreased after DAP treatment compared to that of

Effects of Fiber Content and Processing Parameters on Tensile Properties of Unidirectional Long Kenaf Fiber Reinforced Polylactic-Acid Composite

Effects of Processing Parameters on Tensile Properties The results of the unidirectional LKF/PLA with 50%wt mechanical properties in terms of tensile strength and Young’s modulus at 5