DAN FINIR
9 DAFTAR PUSTAKA
Achmadi SS. 1990. Kimia Kayu. Bogor (ID): Institut Pertanian Bogor.
Agustina A. 2011. Kulit Buah Jarak Pagar (Jatropha curcas L.) sebagai Salah Satu Bahan Baku Apembuatan Papan Partikel [Skripsi]. Bogor (ID): Institut Pertanian Bogor.
Bektas I, Guler C, Kalaycioglu H, Mengeloglu F, Nacar M. 2005. The Manufacture of Particleboards using Sunflower Stalks (Helianthus annuus l.) and Poplar Wood ( Populus alba L.). J. Composite Materials: 39 (5): 467-473
Bowyer JL, Shmulsky, Haygreen JG. 2003. Forest Products and Wood Science - An Introduction. Fourth edition. Iowa (US): Iowa State University Pr.
Carels N. 2009. Jatropha curcas: A Review. Advances in Botanical Research:50. Christiansen AW. 1990. How Overdrying Wood Reduces Its Bonding to
Phenolformaldehyde Adhesives: A Critical Review of The Literature. Part I. Physical Responses. J. Wood and Fiber Science 22(4): 441-459.
Clausen CA, Cartal SN, Muehl J. 2000. Properties of Particleboard Made from Recycled CCA-Treated Wood. Paper prepared for the 31st Annual Meeting Kona, Hawaii, USA 14-19 May, 2000
Colak S, Olako˘glu GC. 2006. Effects of Wood Species and Adhesive Types on the Amount of Volatile Acetic Acid of Plywood by Using Desiccator-Method. Holz als Roh- und Werkstoff: 64: 513–514. DOI 10.1007/s00107-006-0108-x
Febrianto F, Hidayat W, Samosir TP, Lin HC, Soong HD. 2010. Effect of Strand Combination on Dimensional Stability and Mechanical Properties of Oriented strand Board Made from Tropical Fast Growing Tree Species. J. Biological Science 10(3): 262-272
Garay RM, MacDonald F, Acevedo ML, Calderón B, Araya JE. 2009. Particleboard Made with Crop Residues Mixed with Wood from Pinus radiata. J. BioResources :4(4): 1396-1408.
Guler C, Copur Y, Tascioglu C. 2008. The Manufacture of Particleboards Using Mixture of Peanut Hull (Arachis hypoqaea L.) and European Black Pine (Pinus nigra Arnold) Wood Chips. J. Bioresource Technology :99: 2893–2897
Hadi YS. 1988. Pengaruh Perendaman Panas Partikel Kayu terhadap stabilitas Dimensi papan Partikel Meranti Merah. J. Teknologi Hasil Hutan 2 (1): 16-24. Hadi YS. 1991. Pengaruh Perendaman Panas dan Asetilasi selumbar Terhadap Sifat
Papan Partikel [Disertasi]. Bogor: Program Pascasarjana, Institut Pertanian Bogor.
Han G, Deng J, Zhang S, Bicho P, Wu Q. 2009. Effect of Steam Explotion Treatment on Characteristics of Wheat Straw. Ind.Crops. prod. Doi: 10.1016/j.indcrop.2009.08.003
Harmsen PFH, Huijgen WJJ, Lopez LMB, Bakker RRC. 2010. Literature Review of Physical and Chemical Pretreatment Processes for Lignocellulosic Biomass. Project Report. Wageningen, Germany.
He G, Riedl B. 2004. Curing Kinetics of Phenol Formaldehyde Resin and Wood- Resin Interaction in Presence of Wood Substrates. J.Wood Sci Technol: 38: 69- 81.
Heebink BG, Lehmann WF, Hefty FV. 1972. Reducing Particleboard Pressing Time: Exploratory Study. Research Paper FPL 180. U.S. Department of Agriculture Forest Service Forest Products Laboratory Madison, Wisconsin Heinemann C, Fruhwald A, Humphrey PE. 2002. Evaluation of Adhesive Cure
During Hot Pressing of Wood-Based Composites. Proceeding of International Symposium on Wood Based Materials. Wood Composites and Chemistry. September 19-20, 2002 in Vienna, Austria.
Heller JCP. 2009. The Influence of Hot Water Extraction on Physical and Mechanical Properties of OSB. Dissertation The University of Maine
Irle M, Barbu MC. 2010. Wood-Based Panels - an Introduction for Specialists. Heiko Thoemen, editor. Inggris (GB): Mark Irle, Milan Sernek, Brunel University Pr
Iswanto AH, Febrianto F, Wahyudi I, Hwang WJ, Lee SH, Kwon JH, Kwon SM, Kim NH, Kondo T. 2010. Effect of Pre–treatment Techniques on Physical, Mechanical and Durability Properties of Oriented Strand Board Made from Sentang wood (Melia excelsa Jack). J. Fac. Agr., Kyushu Univ :55 (2), 371–377 Iswanto AH, Sucipto T, Febrianto F. 2011. Acidity and Buffering Capacity of Some
Tropical Wood. J. Ilmu dan Teknologi Hasil Hutan :4(1): 21-24
Iswanto AH, Sucipto T, Febrianto F. 2011. Analisa Bahan Berlignoselulosa dan Pengaruhnya terhadap Optimalisasi Daya Ikat Perekat Sintetis dalam Rangka Menghasilkan Produk Komposit Berkualitas. Laporan Hasil Penelitian. Universitas Sumatera Utara
Iswanto AH, Fatriasari F, Supriyanto. 2012. Pemanfaatan Limbah Batang Sorghum (Sorghum bicolor (L) Monech) Sebagai Bahan Baku Papan Partikel. Makalah pada Workshop on the Current Status and Challenges in Sorghum Development in Indonesia, Bogor 25-26 September 2012.
[JIS] Japanese Industrial Standard. 2003. JIS A 5908: 2003. Particleboards. Japanese Standard Association. Jepang
[JIS] Japanese Industrial Standard. 1980. JIS K 6883: 1980. General Testing Methods for Adhesives. Japanese Standard Association. Jepang
Johns WE, Niazi KA. 1980. Effect of pH and Buffering Capacity of Wood on the Gelation of Urea Formaldehyde Resin. J. Wood and Fiber Sci :12(4): 256-263 Jongschaap REE, Corre WJ, Bindraban PS, Brandenburg WA. 2007. Claim and
Facts on Jatropha curcas L: Global Jatropha curcas Evaluation, Breeding and Propagation Program. Plant Research International B.V, Wageningen.
Kamal I, Poh KM, Eng TY, Ren XJ, Ashaari Z. 2010. Buffering Capacity of Fast Growing Species and Curing Time of UF Resin Modified with Zinc Borate and Monoammonium Phospate. Am. J. Applied Sci: 7(8): 1079-1082
Kanai K, Azuma JI, Nishimoto K. 1982. Studies on Digestive System of Termites. I. Digestion of Carbohydrates by Termite Coptotermes formosanus Shiraki. J. Wood Research: 68: 47-57
Kasim J, Ahmad AJ, Harun J, Mohmod ZAAL, Yusof MNM. 2001. Properties of Particleboard Manufactured from Commonly Utilized Malaysian Bamboo (Gigantochloa scortechinii). Pertanika J. Trap. Agric. Sci: 24(2): 151 – 157 Kelly MW. 1977. Critical Literature Review of Relationship Between Processing
Parameter and Physical Properties of particleboard. General Technical Report FPL-10. U.S. Department of Agriculture Forest Service and Forest Products Laboratory University of Wisconsin
Kose C, Terzi E, Buyuksari U, Avei E, Ayrilmis, N, Kartal SN, Imamura Y. 2011. Particleboard and MDF Panels Made from a Mixture of Wood and Pinecones: Resistance to Decay Fungi and Termites Under Laboratory Conditions. J. BioResourches : 6(2): 2045-2054
Krilov A, Lasander WH 1988. Acidity of Heartwood and Sapwood in Some Eucalyptus Species. J. Holzforschung: 42(4): 253-258
Langum CE. 2007. Characterization of Pacific Northwest Softwoods for Wood Composites Production. [Thesis]. Washington (US): Washington State University
Lee YK, Kim S, Yang HS, Kim HJ. 2003. Mechanical Properties of Rice Husk Flour-Wood Particleboard by Urea-Formaldehyde Resin. J. Mokchae Konghak 31(3): 42-49
Malanit P, Barbu MC, Fruhwald A. 2009. The Gluability and Bonding Quality of an Asian Bamboo (Dendrocalamus asper) for the Production of Composite Lumber. J. Tropical Forest Science: 21(4): 361-368
Maloney TM. 1993. Modern Particleboard and Dry - Process Fiberboard Manufacturing. Updated Edition. San Francisco (US): Miller Freeman Pr
Marra AA. 1992. Technology of Wood Bonding Principles in Practise. New York (USA): Van Nostrand Reinhold Pr
Mohmod AL, Ariffin WTW, Ahmad F. 1990. Anatomical Features and Mechanical Properties of Three Malaysian Bamboos. J. Tropical Forest Science : 2(3): 227 – 234
Misran S. 2005. Evaluation of Oriented Strand Board Made from Rubber Wood Using Phenol Formaldehyde as a Binder. [Thesis]. Malaysia: Universiti Putra Malaysia.
Nawawi DS, Rusman D, Febrianto F, Syafii W. 2005. Bonding Properties of Some Tropical Woods in Relation to Woods Acidity. J. Teknologi Hasil Hutan:18:2: 47-52
Nemli G. 2002. Factors Affecting the Production of E1 Type Particleboard. Turk J Agric For :26: 31-36
Norvydas V, Minelga D. 2006. Strength and Stiffness Properties of Furniture Panels Covered with Different Coatings. J. Materials Science (Medžiagotyra) :12(4): 328-332
Ortuno TG, Rodriguez JA, Garcia MTF, Villena MF, Garcia CEF. 2011. Evaluation of the Physical and Mechanical Properties of Particleboard Made from Giant Reed (Arundo donax L). J. BioResourches 6(1): 477-486
Pan Z, Zheng Y, Zhang R, Jenkins BM. 2007. Physical Properties of Thin Particleboard Made from Saline Eucalyptus. J. Industrial Crops and products :26: 185-194
Papadopoulos AN, Hill CAS, Gkaraveli A, Ntalos GA, Karastergiou SP. 2004. Bamboo Chips (Bambusa vulgaris) as an Alternative Lignocellulosic Raw Material for Particleboard Manufacture. J. Holz Roh Werkst: 62:36–39. DOI 10.1007/s00107-003-0447-9
Pari G, Roliadi H, Setiawan D, Saepuloh. 2006. Komponen Kimia Sepuluh Jenis Kayu Tanaman dari Jawa Barat. J Penelitian Hasil Hutan: 24: 89-97..
Paridah MT, Chin AME, Zaidon A. 2001. Bonding Properties of Azadirachta excelsa. J. Trop. For. Prod 7: 161-171
Peniyati D. 1992. Pengaruh Perendaman Panas dan Dingin selumbar pada Empat Tingkat Umur Kayu Sengon (Paraserianthes falcataria (L.) Nielsen). [Skripsi]. Bogor (ID): Fakultas Kehutanan, Institut Pertanian Bogor.
Podgorski L, Chevet B, Onic L, Merlin A. 2000. Modification of Wood Wettability by Plasma and Corona Treatments. Int. J. Adhesion and Adhesives. 20: 103-111. Ruhendi S, Koroh DN, Syamani FA, Nurhaida, Hikmayanti, Saad S, Sucipto T.
Sornnuwat Y, Vongkaluang C, Yoshimura T, Tsunoda K, Takahashi M. 1995. Tunneling of Subterranean Termites, Coptotermes gestroi Wasmann and Coptotermes formosanus Shiraki, into Gravel Physical Barriers. Japanese Journal of Environmental Entomology and Zoology: 7(1):13-19.
Sjöström E. 1981. Wood Chemistry. Fundamentals and Applications. New York (US): Academic Pr
[SNI] Standar Nasional Indonesia. 2006. Uji Ketahanan Kayu dan Produk Kayu Terhadap Organisme Perusak Kayu. Badan Standarisasi Nasional. Jakarta [SNI] Standar Nasional Indonesia. 1998. Fenol Formaldehida Cair untuk Perekat
Kayu Lapis. Badan Standarisasi Nasional. Jakarta
Subiyanto B, Rasyid E, Gopar M, Firmanti A. 2008. Veneer and Thin Plywood Overlaid for Quality Improvement of Particleboard Made of Palm Oil Empty Fruit Bunches (EFB). J. Tropical Wood Science And Technology: 6 (1): 17-20 Sudradjat R, Tresnawati D, Setiawan D. 2005. Pembuatan Arang Aktif dari
Tempurung Biji Jarak Pagar. J Penelitian Hasil Hutan:23:2:143-162
Sujadi. 1985. Penentuan Struktur Senyawa Organik. Jakarta (ID): Ghalia Indonesia Pr
Sulastiningsih IM, Novitasari, Turoso A. 2006. Pengaruh Kadar Perekat Terhadap Sifat Papan Partikel Bambu. Jurnal Penelitian Hasil Hutan 24( 1): 1-8
Sutigno P. 2000. Perekat dan Perekatan. Bogor (ID): Badan Penelitian dan Pengembangan Kehutanan. Pusat Penelitian dan Pengembangan Hasil Hutan. Syamani FA, Massijaya MY, Subiyanto B. 2011. Termite Resistant Properties of
Sisal Board. Proceedings of the 8th Conference of the Pacific Rim Termite Research Group, Thailand 2011.
[TAPPI] Technical Association of Pulp and Paper Industry T 1 os-50. 1950. Water Solubility of Wood. Atlanta (US): TAPPI Pr.
[TAPPI] Technical Association of Pulp and Paper Industry T 9 m-54. 1954. Holocellulose in Wood. Atlanta (US): TAPPI Pr.
[TAPPI] Technical Association of Pulp and Paper Industry T 13 os-54. 1954. Lignin in Wood. Atlanta (US): Atlanta (US): TAPPI Pr.
TAPPI Pr. [TAPPI] Technical Association of Pulp and Paper Industry T 17 m-55. 1955. Cellulose in Wood. Atlanta (US): TAPPI Pr.
[TAPPI] Technical Association of Pulp and Paper Industry T 4 os-59. 1959. One Percent Caustic Soda Solubility of Wood. Atlanta (US): TAPPI Pr.
[TAPPI] Technical Association of Pulp and Paper Industry T 5 cm-73. 2007. Dichloromethane Solubles in Wood, Alcohol Benzene Solubles in Wood. Atlanta (US): TAPPI Pr.
Tsoumis G. 1991. Science and Technology of Wood: Structure, Properties, Utilization. New York (US): Van Nostrand Reinhold Pr.
Wang S, Dai C. 2003. Press Control for Optimized Wood Composite Processing and Properties. Part 2. Properties and Press Control Strategies. Proceeding of a Workshop Fundamental of Composite Processing November 5-6, 2003 in Madison, Wisconsin, USA.
Wina E. 2008. Bungkil Biji Jarak Pakan Murah dan Bergizi. Warta Penelitian dan Pengembangan Pertanian 30(4): 11-12
Winandy JE, Krzysik AM. 2007. Thermal Degradation of Wood Fibers During Hot- Pressing of MDF Composites: Part I. Relative Effects and Benefits of Thermal Exposure. J. Wood and Fiber Science: 39(3): 450 – 461
Xing C, Zhang SY, Deng J. 2004. Effect of Wood Acidity and Catalyst on UF Resin Gel Time. J. Holzforschung :58:408–412
Xing C, Zhang SY, Deng J. 2006. Medium Density Fiberboard Performance as Affected by Wood Fiber Acidity, Bulk Density and Size Distribution. J.Wood Sci Technol : 40: 637-646. Doi: 10.1007/s00226-006-0076-7
Yang HS, Kim DJ, Kim HJ. 2003. Rice Straw-Wood Particle Composite for Sound Absorbing Wooden Construction Materials. J. Bioresource Technology 86 (2003) 117–121
Yasar S, Guntekin E, Cengiz M, Tanriverdi H. 2010. The Correlation of Chemical Characteristics and UF Resin Ratios to Physical and Mechanical Properties of Particleboard Manufactured from Vine Prunings. Scientific Research and Essays :5(8): 737-741
Youngquist JA. 1999. Wood-based Composites and Panel Products. Wood Hand Book: Wood as an Engineering Material. Washington DC (US)