Ahmed, K., Nizami, S. S and Riza, N. Z. 2014. Reinforcement of Natural Rubber Hibrid Composite Base on Marble Sludge/ Silica and Marble Slude/ Rice Husk Derived Silica. Journal of Advanced Reseach : 165-173
Andriyanti, W., Wisjachudin D and Faisal. 2010. Kajian Metode Vulkanisasi Lateks Karet Alam Bebas Nitrosamin dan Protein Alergen. Pusat Teknologi Akselerator dan Proses Bahan – BATAN, Yogyakarta. Prosiding PPI – PDIPTN.
Arvind Mafatlal Grup. Vulcanization & Accelerators.
Azahari, B. 2000. Natural Rubber. Science and Technology. Monthly Lecture Series.
Banerjee, S., Ray, S., Maiti, S., Sen, K., Bhattacaryya, U., Khaity, S and Ghosh, A.
2010. Interpenetrating Polymer Network (Ipn): A Novel Biomaterial. India.
International Journal Of Applied Pharmaceutics Vol 2.
Cherian, E and Jayachandran, K. 2009. Microbial Degradation of Natural Rubber Latex by a novel Species of Bacillus sp. SBS25 isolated from Soil. Autumn.
ISSN: 1735-6865. Int. J. Environ. Res., 3(4) : 599-604.
Cowd, M A. 1991. Kimia Polimer. Bandung. ITB
Dave,V,. Hasmukh, S and Patel. 2013. Synthetis and characterization of interpenetrating polymer network from transesterified castor oil based polyuretane and polystirene. India. Journal of Saudi Chemical Society.
Datta, R.N. 2012. Rapra Review Reports: Rubber Curing Systems. Volume 12, Number 12. ISBN 1-85957-326-6
Deman, J.M. 1989. Principles of food chemistry. Van Nostrand Reinhold, A Division of Wadsworth, Inc. Canada.
Halimatuddahliana. 2007. Modifikasi Bahan Elastomer Termoplastik PP/Karet Alam (PP/NR) Dengan Proses Pemvulkanisasian Dinamik. Journal Elastomers and Plastic. (1 ): 38-42.
Hannam, P.H. 1973. An Introduction To Latex Dipping. Natural Rubber Technology Vol 4. P 2.
Hatakeyam, T. 1998. Handbook of Thermal Analysis. New York: John Wiley & Sons.
Harahap, H., and Baharin, A. 2006. Effect of Diffusion of Curative on Tensile Properties Natural Rubber Latex Films. 3rd Post Graduate Research Papers.
Malaysia.
Hernaman, I., Hidayat, R dan Mansyur. 2005. Pengaruh Penggunaan Molases dalam Pembuatan Silase Campuran Ampas Tahu dan Pucuk Tebu Kering terhadap Nilai pH dan Komposisi Zat-Zat Makanannya. Jurnal Ilmu Ternak, Volume 5 Nomor 2 : 94 – 99.
Idrus, S., Ismail H., Alaniandy, S., 2011. Study of the effect differrent shapes of ultrafine silica as fillers in natural rubber compounds. Polymer testing 30 : 251-259.
Indian Rubber Institute. 1998. Rubber Engineering. Tata McGraw-Hill publishing Cmpany Limited. New Delhi.
Ismail, H., Salleh, S.Z and Ahmad, Z. 2013. Properties of halloysite nanotubes-filled natural rubber prepared usingdifferent mixing methods. School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal, Penang, Malaysia. Materials and Design 50 : 790–
797.
Jong, L. 2015. Influence of Protein Hydrolysis on The Mechanical Properties of Natural Rubber Composites Reinforced with Soy Protein Particles.
Industrial Crops and Product : 102-109.
Kaswinarti, F. 2007. Kajian Teknis Pengolahan Limbah Ampas Padat dan Cair Industri Tahu. Thesis Program Studi Ilmu Lingkungan. Universitas Diponegoro.
Khongtong, S., and Fungchonlajit, N. 2008. Water Swollen Natural Rubber. Walailak J Sci & Tech.. 5(1) : 67-75.
Lawson, D. 2001. Introduction to Fourier trnasform Infrared Spectroscopy. USA:
Thermonicolet.
Li-chun, M., Zhang, Y and Cho, R. 2014. Mechanical thermal and friction properties of rice bran carbon/nitrile rubber composite: influence of particle size and loading. Materials and design 63 : 565-574.
Lipatov, Y. 1995. Polymer Reinforcement. ChemTec publishing. Canada.
Li, Y., Han. B., Wen, S., Lu, Y., Zang, L and Liu, L. 2014. Effect of the temperature on surface modification of silicaa and properties of modified silica filled rubber composites. Beijing University of Chemical technology, Beijing 100029, PR Chine. Composite: Part A 62 : 52-59.
Mark, E. J., Burak, E and Frederick, R. E. 2005. The Science and Technology of Rubber. 3rd Eddition. Elsevier Academic Press.
Mathew, L. 2015. A Study on the Mechanical Properties of Natural Rubber Vulcanizates Using PrecipiBATed Silica and Treated Coir Pith as Filler.
Volume 5 ISSN - 2249-555X.
Munirah, M. 2007. Characterization And Treatments Of Pineapple Leaf Fibre Thermoplastic Composite For Construction Application. Research VOT 75147. Universiti Tekhnologi Malaysia.
Morton, M. 1973. Rubber Technology. Van Nostrand Reinold. 41. Company.
Nabil, H., Ismail, H and Azura. A.R. 2013. Optimisation of accelerators and vulcanising systems on thermal stability of natural rubber/recycled ethylene–
propylene–dienemonomer blends. Materials and Design 53 : 651–661.
Nabil, H., Ismail, H and Azura. A.R. 2013. Compounding, mechanical and morhologicak properties of carbon black- carbon filled natural rubber/recycle ethylene- proyilene- diene- monomer (NR/R-EPDM) blends.
Polymer Testing 32 : 385-393.
Odian, G. 2004. Principles of Polimerization. Fourth Edition. John Wiley and Sons, Inc. Canada.
Peng, F., Guan, Y., Zhang, B., Bian, J., Ren, J., Yao, C and Sun, R. 2014. Synthesis and properties of hemicelluloses-based semi-IPN hydrogels. International Journal of Biological Macromolecules 65 : 564–572
Publications, Unep. 2005. Ammonium Persulfate, Potassium Persulfate, Sodium Persulfate As Members Of The Persulfate Category. Sids Initial Assessment Report.
Putri, E. 2015. Peningkatan Sifat Mekanik Lembaran Nanokomposit Berbasis Lateks Pekat Karet Alam (Hevea Brasiliensis) Yang Diperkuatoleh Nanokristal Selulosa dari Tandan Kosong Kelapa Sawit (Elaeis Guineensis Jack) Dengan Teknik Pencelupan. Universitas Sumatera Utara. Thesis.
Puslitkaret. 2013. Warta Perkaretan. 31-(2): 103-107
Rabek, J.F. 1975. Role Of Singlet Oxigen And Photooxidative Degradation And Photostabilisation Of Polymer. Polymer Eng And Sci. Vol 15,1.
Rini. 1992. Karet : Strategi Pemasaran Tahun 2000 Budidaya dan Pengolahannya.
Jakarta : Penebar Swadaya.
Riyajan, S,. Intharit, I and Tangboriboonrat, P. 2012. Physical properties of polymer composite: natural rubber glove waste/polystyrene foam waste/cellulose.
Industrial Cropss and Product 36 : 376-382
Riyajan, S,. Sasithornsonti, Y., Phinyocheep, P. 2012. Green Natural Rubber-G-Modified Starch For Controlling Urea Release. Carbohydrate Polymers. 89 : 251-258.
Rong, L.T. 2011. Manufacture of Cellulose Nanocrystals by cation exchange Resin- Catalyxzed Hydrolisis of Cellulose. Bioresource technology. 102 : 10973-10977.
Saijun, D,. Nakason, C. Kaesaman, A., Klinpituksa P.2009. Water Absorption And Mechanical Properties Of Water-Swellable Natural Rubber. Thailand.
Songklanakarin J. Sci. Technol. 31 (5) : 561-565.
Senja, R.Y., Issusilaningtyas, E., Nugroho, A.K and Setyowati, E.P. 2014.
Perbandingan Metode Ekstraksi dan Variasi Pelarut Terhadap Rendemen dan Aktivitas Antioksidan Ekstrak Kubis Ungu (Brassica oleracea L. var.
capitata f. rubra). Trad. Med. J., Vol. 19(1), p 43-48 ISSN : 1410-5918.
Setiawan, D.H. 2005. Petunjuk Lengkap Budidaya Karet. Jakarta: Agromedia Pustaka.
Setyamidjaja, D. 1993. Karet. Yogyakarta. Kanisius.
Shivashankar, M. 2012. A Review On Interpenetrating Polymer Network. India.
International Journal Of Pharmacy And Pharmaceutical Sciences, Vol 4, Suppl 5.
Silverio, H. A. 2012. Extraction and Characterization of Cellulose Nanocrystals from Corncob for Application as Reinforcing Agen in Nanocomposites.
Homepage: Industrial Crops and Products. 6376:1-10.
Sousa, F and Scuracchio, C. 2015. The Role of Carbon Black on Devulcanization of Natural Rubber by Microwaves. Materials Research. 18(4): 791-797
Steven, M.P. 2001. Kimia Polimer. Cetakan Pertama. Jakarta: Pradnya Paramita Sulistiani. 2004. Pemanfaatan Ampas Tahu dalam Pembuatan Bubur Tinggi Serat
dan Protein sebagai aAlternatif Bahan Baku Pangan Fungsional. Skripsi, Jurusan Gizi Masyarakat dan Sumberdaya Keluarga. Bogor. Institus Pertanian Bogor.
Sulistyawati, E. 2010. Polimerisasi Akrilamida Dengan Metode, Mixed Solvent PreciiBATion Menggunakan Ini Siator Kalium Persulfat. Univenitas Pembangunan Nasional Veteran. VolumeX , Nomor 1.
Suprapti, L. 2005. Pembuatan Tahu. Edisi Teknologi Pengolahan Pangan.
Tanan. W and Sayant, S. 2014. Microwave Asisted Synthesis of Poly (Acrylamide-co-2-Hydroxyethyl Methacrylate/ Poly(Vinil Alcohol) Semi-IPN Hydrogel.
Thailand. Energy Procedia : 286-393.
Tan, Q., Wang, F., Guo, H., Yang, Y., Du, Y., Liang, J and Zhang, F. 2015. Effect of coupling agent on surface free energy of organic midified attapulgite (OAT) powders and tensile strength of OAT/ethylene-propylene-diene monomer rubber nanocomposites. Powder Technology 270 : 92-97.
Thakare, P., Chaudhary, M. D And Pokale, W. K. 2013. Growth Of Soybean Plant (Glycine Max) In Soya Waste Blended Soil. Chemical Science Transactions.
456 ISSN/E-ISSN: 2278-3458/2278-3318
Thakur S.A., Nemade, S.N and Sharanappa, A. 2015. Solid State Fermentation of Overheated Soybean Meal (Waste) For Production of Protease Using Aspergillus Oryzae. International Journal of Innovative Research in Science, Engineering and Technology (An ISO 3297 Certified Organization).
Vudjung, C., Chaisuwan, U., Pangan, U dan Chaipungdee, N. 2014. Effect Of Natural Rubber Contents On Biodegradation And Water Absorption Of Interpenetrating Polymer Network (Ipn) Hydrogel From Natural Rubber And Cassava Starch. Thailand. Energy Procedia 56 : 255 – 263
Watcharakul, S., Umsakul, K., Hodgson B., Chumeka. W and Tanrattanakul, V.
2012. Biodegradation of a blended starch/natural rubber foam biopolymer and rubber gloves by Streptomyces coelicolor CH13. Electronic Journal of Biotechnology ISSN: 0717-3458.
Wirjosentono, B. 1995. Analisis Dan Karakterisasi Polimer. Medan: Usu Press.
Yustina, I and Rakhmat, A. 2012. Potensi Bubur Dari Ampas Industri Pengolahan Kedelai Sebagai Bahan Pangan. Seminar Nasional Kedaulatan Pangan Dan Energi.
Zhao, J., Dehrabi, N., Han, W., Huang, L and Tang, Y. 2015. Electrospun multi-scale hybrid nanofiber/net with enhanced water swelling ability in rubber composites. Materials and Design 86 : 14–21.
Lampiran 1
Hasil Analisa Sifat Mekanik Kekuatan tarik lembaran karet
Formulasi Load (Kgf) Witdh (mm) Thick (mm) Kekuatan
Rumus Kekuatan Tarik (MPa):
σ
t= Fmaks A0Hasil Analisa Sifat Mekanik Kemuluran lembaran karet
Formulasi Extenssion (mm) Gauge (mm) Kemuluran (mm)
Lampiran 2
Analisa TGA Formulasi 1
Analisa TGA formulsi 3
Analisa TGA Formulasi 6
Lampiran 3
Foto Kompon karet setelah biodegradasidi tanah Interval waktu 3 minggu
Interval waktu 6 minggu
Interval waktu 9 minggu
Lamiran 4
Hasil analisa FTIR untuk formulasi 1
Hasil analisa FTIR untuk formulasi 3
Hasil analisa FTIR untuk formulasi 6
Hasil analisa FTIR untuk formulasi 6 setelah biodegradasi
Lampiran 5
Hasil analisa SEM untuk formulasi 1
Hasil analisa SEM untuk formulasi 3
Hasil analisa SEM untuk formulasi 6
Lampiran 6
Karakterisasi Tepung ampas tahu
Karakteristik Kimia Kadar (%
Protein 16,63
Kadar Lemak sebelum perendaman dengan n-heksan
8,75
Kadar Lemak setelah perendaman dengan n-heksan
2,40
Kadar air 4,65
Kadar Serat 5,22