Aeran H, Jurel SK, Dhobhal A, 2010. Antimicrobial efficacy of spray disinfectants on dental impressions. IJDS;2(6):10-13.
Almortadi N, Chadwick RG, 2010. Disinfection of dental impressions-compliance to accepted standards. Br Dent J;209:607-11.
Alwahab Z, 2012. Comparison of antimicrobial activities and compressive strength of alginate impression materials following disinfection procedure. JCDP;13(4):
431-5.
Amin WM, Al-Ali H, Al Tarawneh SK, Taha ST, Saleh MW, Ereifij A, 2009. The effects of disinfectants on dimensional accuracy and surface quality of impression materials and gypsum casts. J Clin Med Res;1(2):81-9.
Anusavice KJ, 2013. P illip’s science of dental materials. 12th ed. China: Elsevier, 171-6.
Al-Jabrah O, Al-Shumailan Y, Al-Rashdan M, 2007. Antimicrobial effect of 4 disinfectants on alginate, polyether, and polyvinyl siloxane impression materials. Int J Prosthodont 20(3):299–307.
Badrian H, Ghasemi E, Khalighinejad N, Hosseini N, 2012. The effect of three different disinfection materials on alginate impression by spray method. ISRN Dentistry;1-5.
Bidra AS, Jacob RF, Taylor TD, 2012. Classification of maxillectomy defect: a systematic review and criteria necessary for a universal description. J Prosthet Dent;107:261-70.
British Dental Association, 2009. Advice sheet A12: infection control in dentistry.
London: British Dental Association, 1-21.
Budiharto, 2008. Metodologi penelitian kesehatan dengan contoh bidang ilmu kesehatan gigi. Jakarta: EGC, 46.
Bustos J, Herrera R, Gonzalez U, Martínez A, Catalan A, 2010. Effect of inmersion desinfection with 0,5% sodium hypochlorite and 2% glutaraldehyde on alginate and silicone: microbiology and SEM study. Int J Odontostomat;
4(2):169-77.
Centers for Disease Control and Prevention, 2003. Guidelines for infection control in dental health care settings. MMWR;52(17):1-76.
Centers for Disease Control and Prevention, 2015. Klebsiella pneumoniae in healthcare Settings. Diakses 20 Maret 2016.
http://www.cdc.gov/HAI/organisms/klebsiella/klebsiella.html
Correia-Sousa J, Tabaio A M, Silva A, Pereira T, Sampaio-Maia B, Vasconcelos M, 2013. The effect of water and sodium hypochlorite disinfection on alginate impressions. Rev Port Estomatol Med Dent Cir Maxilofac;54:8-12.
Culhaoglu AK, Zaimoglu A, Dogan E, Ozkir SE, 2014. The influence of different mixing methods on the dimensional stability and surface reproduction of two different brands of irreversible hydrocolloids. EGJD;3(1):17-21.
Cunha TFS, et al, 2012. Risk factors for surgical site infection in cervico-facial oncological surgery. J Cranio-Maxillo-Facial Surgery;40:443-8.
Daniel AY, Vinod B, 2015. Prosthetic rehabilitation of the dentate maxillectomy patient from a delayed surgical to an interim obturator: a clinical case report.
CHRISMED J Health;2:68-71.
Egusa H, Watamoto T, Matsumoko T, 2008. Clinical evaluation of the efficacy of removing microorganisms to desinfect patient-derived dental impressions. Int J Prosthodont;21:531-8.
Fukuzaki S, 2006. Mechanisms of actions of sodium hypochlorite in cleaning and disinfection processes. Biocontrol Sc;11(4):147-57.
Ghahramanloo A, Sadeghian A, Sohrabi K, Bidi A, 2009. A microbiologic investigation following the disinfection of irreversible hydrocolloid materials using the spray method. J Calif Dent Assoc;37(7):471-7.
Guiraldo RD, Borsato TT, Berger SB, Lopes MB, Gonini-Jr A, Sinhoreti MA, 2012.
Surface detail reproduction and dimensional accuracy of stone models:
influence of disinfectant solutions and alginate impression materials. Braz Dent J;23(4):417-21.
Hanafia KA, 2003. Rancangan percobaan: teori dan aplikasi. Ed 3. Jakarta: PT Raja Grafindo Persada, 9.
Haralur SB, Al-Dowah OS, Gana NS, Al-Hytham A, 2012. Effect of alginate chemical disinfection on bacterial count over gypsum cast. J Adv Prosthodont;4(2):84-8.
Hiraguchi H, Kaketani M, Hirose H, Yoneyama T, 2012. Effect of immersion disinfection of alginate impressions in sodium hypochloride solution on the dimensional changes of stone models. Dent mater J;31(2):280-6.
Kotsiomiti E, 2008. Accuracy and stability of impression materials subjected to chemical disinfection-a literature review. J Rehabilitation;35:291-9.
Kumar AR, 2013. Antimicrobial sensitivity pattern of Klebsiella pneumoniae isolated from pus from tertiary care hospital and issue related to the rational selection of antimicrobials. J Chem Pharm Res;5(11):326-31.
Lamont RJ, 2006. Oral microbiology and immunology. Washington: ASM Press, 3,423-30.
Lawlor MS, Hsu J, Rick PD, Miller VL, 2005. Identification of Klebsiella pneumoniae virulence determinants using an intranasal infection model.
Molecular Microbiology;58(4),1054-73.
Manyahi J, 2012. Bacteriological spectrum of post operative wound infections and their antibiogram in a tertiary hospital, dar es salaam, tanzania. Dissertation.
Muhimbilli University of Health and Allied Sciences;1-65.
Mc Cabe JF, Walls A W G, 2008. Applied dental materials. 9th ed. Singapore:
Blackwell Publishing:154-62.
Mc Daniel TF, Kramer RT, Im F, Snow D, 2013. Effect of mixing technique on bubble formation in alginate impression material. General Dentistry;35-9.
Memarian M, Fazeli MR, Jamalifar H, Azimnejad A, 2007. Disinfection efficiency of irreversible hydrocolloid impressions using different concentrations of sodium hypochlorite: a pilot study. JCDP;8(4):1-8.
Nassar U, Aziz T, Flores-Mir C, 2011. Dimensional stability of irreversible hydrocolloid impression materials as a function of pouring time: a systematic review. J Prosthet Dent;106:126-33.
Ohara-Nemoto Y, Haraga H, Kimura S, Nemoto TK, 2008. Occurrence of staphylococci in the oral cavities of healthy adults and nasal oral trafficking of the bacteria. J Med Microbiol;57(Pt 1):95-9.
Omo JO, Sede MA, Enabulele JE, 2014. Prosthetic rehabilitation of patients with maxillary defects in a nigerian tertiary hospital. Ann Med Health Sci Res;4:630-3.
Paczosa MK, Mecsas J, 2016. Klebsiella pneumoniae: going on the offense with a strong defense. Microbiol Mol Biol Rev;80:629-61.
Power JM, Wataha JC, 2008. Dental materials: properties and manipulation. 9th ed. St Louis: Mosby,172-80.
Rutala, 2008. Guideline for disinfection and sterilization in healthcare facilities. 1-15.
Sakaguchi RL, Powers JM, 2012. raig’s restorative dental materials. 13th ed. United States: Elsevier,277-86.
Samaranayake L, 2012. Essential microbiology for dentistry. 3rd ed. St Louis:
Elsevier,309-28.
Schmitz RA, Klopprogge K, Grabbe R, 2002. Regulation of nitrogen fixation in Klebsiella pneumoniae and Azotobacter vinelandii: NifL, transducing two environmental signals to the nif transcriptional activator NifA. J Mol Microbiol. Biotechnol,4(3):235-42.
Setiawan A, 2009. Rancangan acak lengkap. Diakses 29 Oktober 2015.
http://smartstat.wordpress.com
Siegel JD, Rhinehart E, Jackson M, Chiarello L, 2007. Guideline for isolation precautions: preventing transmission of infectious agents in healthcare settings.1-266.
Sikarwar AS, Batra HV, 2011. Identification of Klebsiella pneumoniae by capsular polysaccharide polyclonal antibodies. Int J Chem Engineering and Applications,2(2):130-4.
Sinavarat, 2014. Effects of disinfection procedures on surface quality of compound impressions and the resultant gypsum casts. M Dent J;34:19-27.
Singh M, Bhushan A, Kumar N, Chand S, 2013. Obturator prosthesis for hemimaxillectomy patients. Natl J Maxillofac Surg;4:117-20.
Suprono MS, Kattadiyil MT, Goodacre CJ, Winer MS, 2012. Effect of disinfection on irreversible hydrocolloid and alternative impression materials and the resultant gypsum casts. J Prosthet Dent;108:250-8.
Vojvodic D, Kranjcic, 2013. A two step (altered cast) impression technique in the prosthetic rehabilitation of a patient after a maxillectomy: a clinical report. J Prosthet Dent;110:228-31.
Wieckiewicz W, et al, 2002. Study on the occurrence of microorganisms on the post surgical maxillary prostheses with obturators and in the post surgical cavities of maxilla. Bull Group Int Rech Sci Stomatl Odontol;45:29-33.
Zilinkas J, et al, 2014. Viability changes: microbiological analysis of dental casts.
Med Sci Monit;20:932-7.