BAB V KESIMPULAN DAN SARAN
5.2 Saran
Dalam pelaksanaan penelitian yang berjudul “Perilaku Korosi Sumuran Terhadap Penambahan Niobium Pada Baja Tahan Karat AISI 316L Dalam Cairan Simulasi Tubuh Manusia” memiliki beberapa kekurangan yang tentunya perlu diperbaiki dan dioptimalkan. Berikut adalah beberapa langkah yang perlu dilakukan untuk penelitian yang lebih lanjut mengenai topik ini:
1. Perlu dilakukan pengujian komposisi kimia yang ada pada masing-masing paduan baja tahan karat AISI 316L ini menggunakan alat yang kompatibel contohnya seperti OES atau EDS point. Hal ini bertujuan untuk mengetahui secara pasti kandungan apa saja yang ada di dalam paduan tersebut dan memastikan apakah kandungan unsur niobium sesuai dengan teoretiknya.
2. Korosi merupakan peristiwa elektrokimia yang terjadi di permukaan material. Oleh karena itu penting sekali untuk menganalisis permukaan material yang lebih rinci agar dapat menjawab baik buruknya material dalam hal ketahanan korosi. Penulis menyarankan agar penelitian selanjutnya disertai pengamatan permukaan material contohnya adalah pengamatan lapisan pasif. Contoh alat yang dapat digunakan adalah XPS dan XRD
3. Untuk penelitian yang lebih lanjut agar mendapatkan hasil yang lebih optimal, penelitian in vitro ini perlu ditambahkan parameter tertentu agar kondisinya semirip mungkin dengan tubuh manusia. Parameter tersebut diantaranya adalah temperatur, oksigen terlarut dan pH.
Universitas Pertamina - 51
DAFTAR PUSTAKA
[1] N. Eliaz, “Corrosion of Metallic Biomaterials: A Review,” Materials, vol. 12, no. 3, 2019. [2] K. Naci, S. Yavuz, C. Bunyamin dan A. Hayrettin, “Production of 316L Stainless Steel Implant
Material By Powder Metallurgy And Investigation of Their Wear Properties,” Chinese Science Bulletin, pp. 1873-1878, 2012.
[3] M. L. Bozic dan J. Kevin, “Trends in Total Hip Arthroplasty Implant Utilization in the United States,” The Journal of Arthroplasty, vol. 29, no. 10, pp. 1915-1918, 2014.
[4] E. Ivanova, “Metallic Biomaterials: Types and Advanced Applications,” dalam New Functional Biomaterials for Medicine and Healthcare, Cambridge, Woodhead Publishing, 2014, pp. 121-147.
[5] M. Sivakumar, U. K. Mudali dan S. Rajeswari, “In Vitro Electrochemical Investigations of Advanced Stainless Steels for Applications as Orthopaedic Implants,” Journal of Materials Engineering and Performance, vol. 3, no. 6, pp. 744-753, 1994.
[6] M. Talha, C. K. Behera dan O. P. Sinha, “Potentiodynamic Polarization Study of Type 316L and 316LVM Stainless Steels for Surgical Implants in Simulated Body Fluids,” Journal of Chemical and Pharmaceutical Research, vol. 4, no. 1, pp. 203-208, 2012.
[7] E. K. Brooks, R. P. Brooks dan M. T. Ehrensberger, “Effect of Simulated Inflammation on the Corrision,” Materials Science and Engineering, vol. 71, pp. 200-205, 2017.
[8] C.-W. K. Fang dan Feng-Zhou, “State of the art of bioimplants manufacturing: part I,” Advances in Manufacturing, vol. 6, pp. 20-40, 2018.
[9] K. Prasad, O. Bazaka, M. Chua, M. Rochford, L. Fedrick dan J. Spoor, “Metallic Biomaterial: Current Challenges and Opportunities,” Materials, vol. 10, no. 8, 2017.
[10] S. Ali, A. M. A. Rani, R. A. Mufti, F. I. Azzam, S. Hastuty, Z. Baig, M. Hussain dan N. Shehzad, “The Influence of Nitrogen Absorption on Microstructure, Properties and Cytotoxicity Assessment of 316L Stainless Steel Alloy Reinforced with Boron and Niobium,” Processes, vol. 7, no. 8, 2019.
[11] S. Hiromoto, “Corrosion of Metallic Biomaterials,” dalam Metals for Biomedical Devices, Cambridge, Woodhead Publishing, 2010, pp. 99-121.
[12] S. d. F. F. Mariotto, V. Guido dan L. Y. Cho, “Porous Stainless Steel for Biomedical Applications,” Materials Research, vol. 14, no. 2, pp. 146-154, 2011.
Universitas Pertamina - 52 [13] M. M. Dewidar, K. A. Khalil dan J. K. Lim, “Processing and Mechanical Properties of Porous
316L Stainless Steel for Biomedical Application,” Transaction of Nonferrous Metals Society of China, vol. 17, pp. 468-473, 2007.
[14] M. M. Dewidar, H.-C. Yoon dan J. K. Lim, “Mechanical Properties of Metals for Biomedical Application Using Powder Metallurgy Process: A Review,” Metals and Materials International, vol. 12, no. 3, pp. 193-206, 2006.
[15] C. Garcia, F. Martin, P. d. Tiedra dan L. G. Cambronero, “Pitting Corrosion Behaviour of PM Austenitic Stainless Steels Sintered in Nitrogen–Hydrogen Atmosphere,” Corrosion Science, vol. 49, no. 4, pp. 1718-1736, 2007.
[16] J. Lane, J. Mait, A. Unnanuntana, B. Hirsch, A. Shaffer dan O. Shonuga, “Materials in Fracture Fixation,” Comprehensive Biomaterial, vol. 6, pp. 219-235, 2011.
[17] S. Q. Wu, C. H. Zhang, S. Zhang, Q. Wang, Y. Liu dan A. Abdullah, “Effect of Nb Addition on Microstructure and Corrosion Resistance of Novel Stainless Steels Fabricated by Direct Laser Metal Deposition,” Materials Research Express, vol. 5, no. 3, 2018.
[18] E. Bayraktaroglu, H. O. Gulsoy, N. Gulsoy, O. Er dan H. Kilic, “Effect of Boron Addition on Injection Molded 316L Stainless Steel: Mechanical, Corrosion properties and in vitro Bioactivity,” Bio-Medical Materials and Engineering, vol. 22, no. 6, pp. 333-349, 2012. [19] M. Aslam, F. Ahmad, P. S. M. B. M. Yusoff, W. L. Chai, W. C. Ngeow dan M. K. A. Nawi,
“Investigation of Boron Addition on Densification and Cytotoxicity of Powder Injection Molded 316L Stainless Steel Dental Material,” Arabian Journal for Science and Engineering, vol. 41, pp. 4669-4681, 2016.
[20] Y.-S. Huang, W.-T. Tsai, Y.-T. Pan, J.-C. Kuo, H.-W. Chen dan D.-Y. Lin, “Effect of Niobium Addition on the High-Temperature Oxidation Behaviour of 22Cr25NiWCoCu Stainless Steel in Air,” MDPI, vol. 9, no. 9, p. 975, 2019.
[21] S. Prifiharni, M. S. Anwar, A. Nikitasari dan E. Mabruri, “The Hardness, Microstructure, and Pitting Resistance of Austenitic Stainless Steel Fe25Ni15Cr with The Addition of Tungsten, Niobium, and Vanadium,” dalam AIP Conference Proceedings, Banten, 2018.
[22] W. D. Callister, Materials Science and Engineering: An Introduction, New York: John Wiley & Sons, Inc, 2007.
[23] B. Suharno dan B. Arifin, “Duplex Stainless Steel: Karakteristik,” dalam Seminar Tira Austenite, Depok, 2007.
[24] I. a. S. Society, Steel Products Manual: Stainless Steel, Warrendale: Iron and Steel Society, 1999.
Universitas Pertamina - 53 [26] P. A. Perdana, “Pengaruh Quenching terhadap Karakteristik Mekanis dan Ketahanan Korosi
Pada Material Super Duplex UNS S32750 Lasan,” Universitas Indonesia, Depok, 2008. [27] R. R. Indraswari, “Pengaruh Pengelasan Metoda SMAW & GTAW terhadap Perilaku Korosi
Austenitic Stainless Steel 316L,” Universitas Indonesia, Depok, 2010.
[28] H. Prihatnadi dan B. Santoso, “Tinjauan Stainless Steel Sebagai Bahan Mekanik Reaktor Daya,” PRIMA, vol. 7, no. 14, pp. 527-533, 2010.
[29] F.-0. ASTM, Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurement to Determine the Corrosion Susceptibility of Small Implant Devices, West Conshohocken: ASTM International, 2019.
[30] G. Manivasagam, D. Dhinasekaran dan A. Rajamanickam, “Biomedical Implants: Corrosion and its Prevention - A Review,” Corrosion Science, vol. 2, pp. 40-54, 2010.
[31] R. M. Davison, J. D. Redmond dan D. A. Sorace, Steel Products Manual: Stainless Steels, USA: Iron & Steel Society, 1999.
[32] J. Li, L. Qin, K. Yang, Z. Ma, Y. Wang, L. Cheng dan D. Zhao, “Materials Evolution of Bone Plates for Internal Fixation of Bone Fractures: A Review,” Journal of Materials Science & Technologgy, vol. 36, pp. 190-208, 2020.
[33] S. Kalpakjian dan S. R. Schmid, Manufacturing: Engineering and Technology, Singapore: Pearson, 2014.
[34] M. Bram, T. Ebel dan M. Wolff, “Applications of Powder Metallurgy in Biomaterials,” dalam Advances in Powder Metallurgy, Cambridge, Woodhead Publishing, 2013, pp. 520-554. [35] A. Parsapour, S. N. Khorasani dan M. H. Fathi, “Effect of Surface Treatment and Metallic
Coating on Corrosion Behaviorand Biocompatibility of Surgical 316L Stainless Steel Implant,” Journal of Materials Science and Technology, vol. 28, no. 2, pp. 125-131, 2011.
[36] N. Alonso-Falleiros dan S. Wolynec, “Effect of Niobium on Corrosion Resistance to Sulfuric Acid of 430 Ferritic Stainless,” Material Research, vol. 1, no. 1, pp. 39-45, 1998.
[37] M. Fontana, Corrosion Engineering, Singapore: McGraw-Hill, 1987.
[38] S. Novita, “Analisis Laju Korosi dan Kekerasan Pada Stainless Steel 304 dan Baja Nikel Laterit dengan Variasi Kadar Ni (0, 3, dan 10% Ni) dalam Medium Korosif,” Universitas Bandar Lampung, Bandar Lampung, 2018.
[39] P. R. Roberge, Handbook of Corrosion Engineering, New York: McGraw-Hill, 2000.
[40] K. P. Balan, “Corrosion,” dalam Metallurgical Failure Analysis Techniques and Case Studies, Oxford, Elsevier, 2018, p. 155.
Universitas Pertamina - 54 [42] W. C. Lyons, G. J. Plisga dan M. D. Lorenz, “Drilling & Well Completions,” dalam Standard
Handbook of Petroleum and Natural Gas Engineering, Waltham, Elsevier, 2016, pp. 4-1-4-584.
[43] D. I. Lee dan H. C. Lim, “Erosion-Corrosion Damages of Water-Pump Impeller,” International Journal of Automotive Technology, vol. 10, no. 5, pp. 629-634, 2009.
[44] E. A. A. E. Meguid, N. A. Mahmoud dan V. K. Gouda, “Pitting Corrosion Behaviour of AISI 316L Steel In Chloride Containing Solution,” British Corrosion Journal, vol. 33, no. 1, pp. 42-48, 1998.
[45] R. T. Loto, “Pitting Corrosion Resistance and Inhibition of Lead Austenitic Stainless Steel Alloys,” 20 December 2017. [Online]. Available: www.intechopen.com. [Diakses 29 March 2020].
[46] D. Landolt dan S. Mischler, Tribocorrosion of Passive Metals and Coatings, Cambridge: Woodhead Publishing, 2001.
[47] N. Perez, Corrosivity and Passivity: Electrochemistry and Corrosion Science, Boston: Springer, 2004.
[48] D. A. Jones, Principles and Prevention of Corrosion, New Jersey: Prentice-Hall, Inc, 1996. [49] C.-C. Shih, C.-M. Shih, Y.-Y. Su, L. H. J. Su, M.-S. Chang dan S.-J. Lin, “Effect of Surface
Oxide Properties On Corrosion Resistance of 316L Stainless Steel for Biomedical Applications,” Corrosion Science, vol. 46, pp. 427-441, 2004.
[50] R. Crookes, Pickling and Passivating Stainless Steel, Brussels: Euro Inox, 2007.
[51] S. Papavinasam, “Electrochemical Polarization Technuques For Corrosion Monitoring,” Techniques For Corrosion Monitoring, pp. 49-85, 2008.
[52] S. Esmailzadeh, M. Aliofkhazraei dan H. Sarlak, “Interpretation of Cyclic Potentiodynamic Polarization Test Results for Study of Corrosion Behavior of Metals: A Review,” Protections of Metals and Physical Chemistry of Surfaces, vol. 54, no. 5, pp. 976-989, 2018.
[53] H. Modin dan S. Modin, Metallurgical Microscopy, London: London Butterworths, 1973. [54] G. F. V. Voort, Metallography Principles and Practices, USA: ASM International, 1999. [55] A. D. Gianfrancesco, “Technologies for Chemical Analyses, Microstuctural and Inspection
Investigation,” dalam Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, Cambridge, Woodhead Publishing, 2017, pp. 197-245.
[56] Y. Triapriani, “Pembuatan Nanoselulosa Dari Tandan Kosong Sawit Dengan Metode Hidrolisis Asam,” Universitas Lampung, Lampung, 2016.
Universitas Pertamina - 55 [57] A. S. Mane, “Fluid Resuscitation: Lactate Versus Normal Saline-A Clinical Study,”
International Journal of Contemporary Medical Research, vol. 4, no. 11, pp. 2290-2293, 2017. [58] I. Gurappa, “Characterization of Different Materials for Corrosion Resistance Under Simulated
Body Fluid Conditions,” Materials Characterization, vol. 49, pp. 73-79, 2002.
[59] A. Pardo, M. Merino, A. Coy, F. Viejo, R. Arrabal dan E. Matykina, “Pitting Corrosion Behaviour of Austenitic Stainless Steels – Combining Effects of Mn and Mo Additions,” Corrosion Science, vol. 50, pp. 1796-1806, 2008.
[60] S. Mishra dan R. Datta, “Embrittlement of Steel,” dalam Encyclopedia of Materials: Science and Technology (Second Edition), Oxford, Elsevier, 2001, pp. 2761-2768.
Form TA-2 Bimbingan Tugas Akhir
FAKULTAS TEKNOLOGI INDUSTRI
PROGRAM STUDI TEKNIK MESIN
UP-SPMI/FR.4.006/R00 FAKULTAS TEKNOLOGI INDUSTRI | 1
Nama Mahasiswa : Fandika Reza Ardi Saputra NIM : 102216004
Nama Pembimbing : Dr. Eng. Sri Hastuty NIP :116104
No. 1 Hari/Tanggal: Rabu, 22 Januari 2020
Hal yang menjadi perhatian:
Revisi Proposal Tugas Akhir
Paraf Pembimbing:
No. 2 Hari/Tanggal: Kamis, 6 Februari 2020
Hal yang menjadi perhatian:
Review Paper Internasional
Form TA-2 Bimbingan Tugas Akhir
FAKULTAS TEKNOLOGI INDUSTRI
PROGRAM STUDI TEKNIK MESIN
UP-SPMI/FR.4.006/R00 FAKULTAS TEKNOLOGI INDUSTRI | 2
Nama Mahasiswa : Fandika Reza Ardi Saputra NIM : 102216004
Nama Pembimbing : Dr. Eng. Sri Hastuty NIP :116104
No. 3 Hari/Tanggal: Kamis, 13 Februari 2020
Hal yang menjadi perhatian:
Presentasi Hasil Review Paper
Paraf Pembimbing:
No. 4 Hari/Tanggal: Kamis, 20 Februari 2020
Hal yang menjadi perhatian:
Demonstrasi Alat (Potensiostat)
Form TA-2 Bimbingan Tugas Akhir
FAKULTAS TEKNOLOGI INDUSTRI
PROGRAM STUDI TEKNIK MESIN
UP-SPMI/FR.4.006/R00 FAKULTAS TEKNOLOGI INDUSTRI | 3
Nama Mahasiswa : Fandika Reza Ardi Saputra NIM : 102216004
Nama Pembimbing : Dr. Eng. Sri Hastuty NIP :116104
No. 5 Hari/Tanggal: Rabu, 26 Ferbuari 2020
Hal yang menjadi perhatian:
Progres Laporan
Paraf Pembimbing:
No. 6 Hari/Tanggal: Selasa, 24 Maret 2020
Hal yang menjadi perhatian:
1. Penyesuaian Judul TA
2. Penekanan Mengenai Powder Metallurgy dan Penambahan Boron dan
Niobium pada Latar Belakan Laporan TA
Form TA-2 Bimbingan Tugas Akhir
FAKULTAS TEKNOLOGI INDUSTRI
PROGRAM STUDI TEKNIK MESIN
UP-SPMI/FR.4.006/R00 FAKULTAS TEKNOLOGI INDUSTRI | 4
Nama Mahasiswa : Fandika Reza Ardi Saputra NIM : 102216004
Nama Pembimbing : Dr. Eng. Sri Hastuty NIP :116104
No. 7 Hari/Tanggal: Selasa, 31 Maret 2020
Hal yang menjadi perhatian:
Perubahan Susunan Prosedur Penelitian
Paraf Pembimbing:
No. 8 Hari/Tanggal: Minggu, 12 April 2020
Hal yang menjadi perhatian:
Menambahkan Fokus Perbedaan 316L Dibanding dengan Logam Lain dari Beberapa
Aspek : Biaya, Ketahanan Korosi, Formability Dll.
Form TA-2 Bimbingan Tugas Akhir
FAKULTAS TEKNOLOGI INDUSTRI
PROGRAM STUDI TEKNIK MESIN
UP-SPMI/FR.4.006/R00 FAKULTAS TEKNOLOGI INDUSTRI | 5