Md.Mohiuddin, a student of Marketing program at Daffodil International University, with ID, has submitted the Internship Report titled "Commercial Activities in RMG Sector, a Study of World Bangladesh Pants Ltd" on 12 July 2014, for fulfilling the requirements of BBA ladder. I have chosen readymade garments industry to do my internship and the company name is Trouser world Bangladesh Ltd.
VISION
MARKETS THEY EXPORT TO
Political Imbalance: One of the main threats to Trouser World Bangladesh Limited is the current political instability. Rear – The rear allows the movement of the needle to be controlled using a cam mechanism.
Single Jersey Fabric
2x2 rib half vest or royal rib Full vest or polka rib Swiss do uble pique French double pique 5x1 Derby rib. Width and length extensions are about the same as single jersey. The fabric does not curl at the sides. T he fabric can be stepped off from the knit last. Two yarns must be removed to unravel a complete repeat of knitted courses.
Double Jersey Fabric
Fleece
Terry
Obstacles to the passage of the yarn due to clogging of the eyelets, yarn guides and tension discs, with wax and hair, etc. The average difference in quantity in the batch should not be more than + 0.3 Make sure that the yarn used for Knitting is of the same batch / no. On the surface of the fabric, notches appear in the form of large loops of yarn, which twist due to a large twist of the yarn (unbalanced yarn).
The presence of foreign materials, in the mixture of basic fibers (Kitty, Husk, Brok en Seed s, fibers and dyed fibers such as polypropylene, polyester, viscose etc.) Colored and other fibers flying from adjacent knitting machines are attached , to the thread used for knitting and take, embedded in the Gray F abrica. Use the fiber-rich yarn mixture, to be used for knitting, so that less dead fibers appear in the fabric. Needle marks are pronounced, vertical lines along the length of the fabric that are easily visible on gray as well as finished fabrics.
Replace all worn or bent sinks, which cause sinker lines in the fabric. Fabric extortion appears as a large or small hole in the fabric, which is caused due to the interruption of the loop formation process, due to the breakage of the thread, or closed needle hook s. Thread feeder remains in raised position, whereby the thread is not fed into the hooks of the needles.
The fabric will appear to have visible density variations from roll to roll or within the same roll of the same dye lot. Spare parts are arranged in the warehouse according to their size, quantity and requirements.
Process Complete
After sending the first/fit/proto sample, I keep this sample in the hanger and development sample in a named buyer box with a polygon. After sending the first/fit/proto sample, I keep this sample in the hanger and development sample, I keep it in a buyer box mentioned with a polygon, After sending the first/fit/proto sample, I keep this sample in hanger and development. I keep the sample in a buyer's box mentioned with poly,. After the order is shipped, I keep the entire sample in a cart with the buyer's name, style name, and.
After completion of marker making and getting fabric, fabric should be properly cut according to marker dimensions. Marker can come from the CAD department and after that fabric has to be spread with different layers and then material will be cut by cutting machines. So metimes cutting machines are automatic and so meti mes cutting machines are handled by hand.
In cutting department, automatic and manual cutting machines are used, while dust distribution is done automatically by automatic material spreader and also manually by human hand.
PROCESS DESCRIPTION
Along with the bundles, the cutting department also issues to the sewing line a format called Production Issue Slip containing details of the bundles issued, such as bundle number, size, number of pieces, etc. In the cutting department there are cutting units with straight blade machines from different length and automatic cutting machine are used for cutting the fabric after spreading. The cutting department has a total of 13 cutting tables where the fabrics are spread out and then the cutting is completed.
In Spider Group, there is a printing section called Printers and Printers Limited, where almost all the printing work is done. In Spider Gro up there is also a new embroidery department whose activities have already started. In spider Gro up there are 3 sewing floors named Trouser world Banglad esh Li mited, Fashion Asia Limited and Mod ular Floor.
Machine over closure: after cutting the fabric threads take it out from the side of the fabrics in order to prevent it and increase the durability or long durability. . The machine can be used for the closing process of t-shirts, polo shirts and for the covering process. Class-400 Multi-Thread Chain Stitch: Machine: Single Needle Chain Stitch, Double Needle Chain Stitch, Arm Feed, Multi Kansai Needle, All Eye/Key Machine Use Inseam, Side Seam, Belt belt etc. of woven fabrics.
XX XXX XXX XXX XXX XX X
Class-300 Lock Stitch: Single-needle single-lock stitch, double-needle stitch, bar catch, buttonhole, and machine button stitch are used.
XXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXX
Any garments/parts that have been checked and are to be returned to the sewing floor must be kept separate from the unmarked, in a clearly marked trolley to prevent mix-up. When inspecting the fabric, the position must be 45 - 30 degrees between the eye and fabric checking. 2nd inspection: Check the fabric 20% of each lot if the 1st inspection is rejected.
3rd Inspection: Check the actual fabric width and length, compared to the label attached to the roll of fabric and placed in the report ½” of fabric pinhole to hole should be to determine waste (Cut table with ). Fabric relaxation control, make sure the batch timing minimum 24 hours and spandex minimum 48 hours before the fabric is laid on the cutting table. . Make sure that fabric laying is aligned from bottom to top, especially the fabric with stripe it must be aligned stripe Checkmark, compared to the hard paper pattern. Check the marker, panel position must be even direction, before cutting.
It is basically the process of checking the quality of a product during the product's operation. Mock Up must hang on the operational machine (Ext: Pocket mo ck up – hang in machine operator making the bag) Please make sure that the template must be correct and already prepared before starting production. If necessary ed) Control the quality of the garment and check the accessories' use and placement. If the problem is found, QC must be attended in place until the operator has proven (Corrective Action).
END-LINE INSPECTION
103 [Local Language Diagram] Inline QC to emphasize control at every critical point and at every operation. For a minimum of 6 pieces of measuring operations, specific specifications require inline QC to monitor each operation, from loading the sewing work. Check operation, per operation [check more at critical point] until end line/complete garment. After sewing, there is a process or arrangement of a quality check of that product, which is known as the End Line Quality Check.
The back-line QC should assist the In-Line QC when the first start-up pilot starts or when production begins. There are arrangements to control the quality of the process in a clothing production line. Usually critical processes are checked after its completion and if any error is found then it will go to operation for rework.
Quality audit is usually performed by the AQL system control process, where each type of control is performed by a garment.
Each hour check 7 pcs (Randomly)
Acceptance of a suitable sample: After submitting a suitable sample, the merchant must obtain an approval of the suitable sample from the buyer, also called a suitable comment. Lab-dip Approval: After submitting the Lab-dip, the merchant must obtain lab-dip approval from the buyer. Receiving Master Letter of Credit: After the style is approved, the buyer comes to negotiate the price or cost of the order.
111 PP Sample Approval: The buyer checks the PP samples and after the buyer approves the PP samples, the seller makes a run for the bulk production of the order. Submission of Bulk Substance/Test Reports: The seller must prepare and submit a test report of the bulk material to the buyer before commencing bulk production. Finally, it is a negotiation meeting with the buyer, where the buyer makes the decision about his requirements for shipping and solves the problem of shipping the garment.
Final inspection: When the customer arrives for the final inspection, the merchant must stay with the customer to ensure and convince the customer that the quality of the clothing is in accordance with the customer's requirements and that it is a garment of the highest quality. Each bank assumes responsibility for the buyer's and manufacturer's warranty for purchase and delivery. In this report, I have examined the relationship between price, advertising and promotion, salary and sales performance of Trouser World Bangladesh Limited.
