• Tidak ada hasil yang ditemukan

Product Design Consideration For Short Glass Fiber Reinforced Composite Brake Pedal Design.

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2017

Membagikan "Product Design Consideration For Short Glass Fiber Reinforced Composite Brake Pedal Design."

Copied!
24
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 24 Halaman )

Teks penuh

(1)
(2)
(3)
(4)
(5)
(6)
(7)

v

ABSTRACT

This thesis discusses the main parameters required in designing a short glass fiber

reinforced composite for brake pedal. The design of a composite brake pedal

involves four major considerations that are closely intertwined. They are material,.

processing, design and co:st estimation. Based on the study of these four maint

elements, several design concepts was produced and some wiU than him be chosen to

be made prototype. The selection was made based on the analysis result that was

produced from SolidWorks software. At the end, the detail of design of brake pedal.

was discussed in this thesis . .

(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)

Referensi

Unduh sekarang ( PDF - 24 Halaman - 1.13 MB )

Garis besar

Product Design Consideration For Short Glass Fiber Reinforced Composite Brake Pedal Design.

Dokumen terkait

Perbedaan Celah Mikro Pasak Glass Prefabricated Fiber Reinforced Dan Pasak Pita Polyethylene Fiber Reinforced Dengan Menggunakan Sistem Adhesif Total- Etch (Penelitian In Vitro).

A pada pasak glass prefabricated fiber reinforced terlihat adanya celah mikro (CM) diantara semen luting (LS) dengan dentin saluran akar, sedangkan antara pasak glass

Development And Analysis Of New Intraply For Glass Fiber And Kenaf Fiber In Composite Structure Applications.

The eight lamina intraply composite is fabricated by using vacuum infusion and the glass fiber and kenaf fiber as reinforcements and epoxy resin as matrix according

Design And Fabrication Of Pedal Components For UTeM Formula Style Race Car.

These thesis are about the design and fabricate a new brake pedal and fuel pedal for UTeM formula varsity style race car.. The project design has been produced using

Development Of Double Wishbone Suspension Using Glass Fiber Reinforced Polymer (GFRP) For Formula Student Race Car.

DEVELOPMENT OF DOUBLE WISHBONE SUSPENSION USING GLASS FIBER REINFORCED POLYMER (GFRP) FOR FORMULA STUDENT RACE CAR.. MUHSIN BIN

Modelling of multi-axial ultimate elastic wall stress (UEWS) test for glass glass fibre reinforced epoxy (GRE) composite pipes

367, 2013, pages 113-117 Modelling of multi-axial ultimate elastic wall stress UEWS test for glass glass fibre reinforced epoxy GRE composite pipes Abstract This paper describes

Penggunaan pita fibre reinforced composite (frc) - Jurnal PDGI

Irma Widyasari: Penggunaan pita fibre reinforced composite frc terbuat dari carbon fiber ataupun glass fiber yang diselubungi oleh suatu matriks resin.6 Dengan berkembangnya tehnologi

Uniaxial ratcheting of fiber glass reinforced epoxy: the effect of the fiber orientation

CONCLUSION A series of finite element analysis has been conducted on Fiber Glass Reinforced Epoxy FRGE laminates having fiber orientation of ± 30º, ± 45º and ± 60º subject to axial..

Development of Brake Booster Design for Electric City Cars

Figure 12 Graph of pedal style and brake oil pressure regarding the experimental electric brake booster In Figure 12, the brake oil pressure required in the braking process is