Velocity Measurement Of Flowing Particle Using Combination Of Laser And Optical Sensor.
Bebas
24
0
0
Teks penuh
Dokumen terkait
So far many optical fiber related acoustic sensing schemes have been reported such as fiber Bragg grating microphone or DFB fiber laser based hydrophone, and so on.
The flame imaging using infrared and optical sensor is a project to obtain the. cross sectional image of flame by using infrared
This type of information is not usually obtainable with the sensor traditionally used by engineer, therefore these techniques gives a better understanding of the flow
In this research, we focused on the evaluation and analysis work of the uncertainty in the optical wavelength calibration system for the stabilized He-Ne laser
This research aims to build a class classification model for new mental retardation students using a combination of C4.5 and Particle Swarm Optimization (PSO)
SAIP2010 Contribution ID:346 Type:Poster Laser Surface Alloying LSA of Martensitic Stainless Steel using Nickel Powder The current investigation deals with laser surface alloying of
Theoretical Considerations on Combined Optical Distance Measurements Using a Femtosecond Pulse Laser
396-400 - 396 - Theoretical Considerations on Combined Optical Distance Measurements Using a Femtosecond Pulse Laser Ki-Nam Joo1,2* and Seung-Woo Kim2 1Department of Photonics
The bandgap value of the deposited nano GaN films grows as the laser ablation energy decreases access to 1400 mJ; the results of the optical bandgap ranged between 3.3 ev and 3.62 ev,
