• Tidak ada hasil yang ditemukan

Flame Imaging Using Ultrasonic Based Tomography.

N/A
N/A
Protected

Academic year: 2017

Membagikan "Flame Imaging Using Ultrasonic Based Tomography."

Copied!
24
0
0

Teks penuh

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)

Referensi

Dokumen terkait

For the gas/liquid two-phase flow, the data obtained from an ultrasonic tomography in the transmission mode may not able to be used for the characteristic image reconstruction of

• Mempu menghasilkan gambar pencitraan ultrasonik dengan berbagai mode • Mampu menjelaskan kelebihan dan kekurangan teknik Doppler pada pencitraan ultrasonik • Able

44 Communications in Computer and Information Science Volume 998, 2019, Pages 171-180 9th International Conference on Computational and Information Technologies in Science, Engineering

SAIP2010 Contribution ID:104 Type:Presentation Determination of shape and size of particles in porous media using tomography imaging The shape and size of particles are used in

We first investigated the BD and divergence angle at the end of the first GRIN lens while varying the spacer length and pitch of the first GRIN lens, to verify the characteristics and

The measurement was undertaken on single and dual arrangements of copper phantom aligned in random coordinates so that the sensitivity of the excitation and receiving coil sensors could

This paper has implemented Eminent Pixel Reconstruction in magnetic induction tomography applications and the performance is compared to Linear Back Projection based on the simulation

32 ultrasonic transducers are used in this prototype which is configured using 16-pair of transmitters and receivers, Peak Detector circuit are used to sample the ultrasonic wave