DAFTAR PUSTAKA
1. Carr AB, Browan DT. McCracken’s Removable Partial Prosthodontics.11th ed. Canada: Elsevier, 2005:5
2. Manappallil JJ. Basic dental materials. 2nd ed. New Delhi: Jaypee Brothers Medical Publishers (P), 2003: 99-101.
3. Craig RG, Powers JM. Restorative dental materials. 11th ed. USA: Mobsy,
2002: 636.
4. International Standart. 2013. The International organization for
standardization . ISO 20795 : 3-6.
5. Ali, Raghdaa K J. Evaluation and comparison of the effect of repeated
microwave irradiations on some mechanical and physical properties of heat
cure acrylic resin and valplast (nylon) denture base materials. J Bagh College
Dentistry 2011; 23(3): 6-10.
6. Kohli S, Bhatia S. Flexural properties of polyamide versus injection-molded
polymethymethacrylate denture base materials. European Journal of
Prosthodontics 2013; 1(3): 56-60.
7. Salman M, Saleem S. Effect of different denture cleanser solutions on some
mechanical and physical properties of nylon and acrylic denture base
materials. J Bagh College Dentistry 2011; 23: 19-24.
8. Saied HM. Influence of dental cleansers on the color stability and surfaces
roughness of three types of denture bases. J Bagh College Dentistry 2011;
23(3): 17-22.
9. Ardelean L, Bortun C, Podariu A, Rusu L. Manufacture of different types of
thermoplastic. 16 Maret 2012. hhtp://www.intechopen.com/books/thermo
plastic-composite-materials/manufacture-of-different-types-of-thermoplastic. 5 September 2014.
11. Orsi IA, Soares RG, Villabona CA, Panzeri H. Evaluation of the flexural and
elastic modulus of resins used for temporary restorations reinforcement with
particulate glass fiber. Gerodontology 2012;29:63-8.
12. Uzun G, Keyf F. The effect of woven, chopped and longitudinal glass fibers
reinforcement on the transverse strength of a repair resin. J of Biomaterials
Applications 2001; 15:351-8.
13. Nakamura M, Takahashi H, Hayakawa I. Reinforcement of denture base resin
with short-rod glass fiber. Dent Materials J 2007; 26(5): 733-8.
14. Tandon R, Gupta S, Agarwal SK. Denture base materials : from past to
future. Indian J od Dental Science 2010; 2(2): 33-9.
15. Wieckiewicz M, Opitz V, Richer G, Klaus WB. Physical properties of
poltamide-12 versus pmma denture base material. 9 Maret 2014.
http://dx.doi.org/10.115/2014/150298. 5 September 2014.
16. Nirwana I. Kekuatan transversa resin akrilik hybrid setelah penambahan glass fiber dengan metode berbeda. Dent J 2005; 38(1): 16-9.
17. Sato S, Cavalcante MRS, Orsi IA, Paranhos HFO de, Zaniquelli O.
Assessment of flexural strength and color alteration of heat-polymerized
acrylic resins after simulated use of denture cleanser. Braz Dent J 2005; 6(2):
124-8.
18. Taqwim A. Aplikasi valpast pada gigitiruan sebagian lepasan. 20 Juni 2011. http://dentosca.wordpress.com/2011/06/20/aplikasi-valpast-pada-gigi-tiruan-sebagian-lepasan/ (5 september 2014)
19. Combe EC, Grant AA. Notes on dental materials. 5th ed. New York: Churchill
Livingstone, 1986: 255-7.
20. Vojvodic D, Matejicek F, Schauperl Z, Mehulic K, Bagic-Cukovic I, Segovic
S. Flexural strength of e-glass fiber reinforced dental polymer and dental high
21. Vojvodic D, Komar D, Schauperl Z, Celebic A, Mehulic K, Zabarovic D.
Influence of different glass fiber reinforcement on denture base polymer
strength (fiber reinforcement of dental polymer). Med Glas 2009; 6(2):
227-34.
22. Ladha K, Shah D. An in-vitro evaluation of the flexural strength of
heat-polymerized poly (methyl metharcrylate) denture resin reinforcement with
fibers. J Ind Prosthodontics Soc 2011: 11(4): 215-20.
23. Rahal JS, Mesquita MF, Henriques GEP, Nὀbilo MAA. Influence of chemical
and mechanical polishing on water sorption and solubility of denture base
acrylic resins. Braz Dent J 2014; 15(3): 225-30.
24. Sitorus Z, Dahar E. Perbaikan sifat fisis dan mekanis resin akrilik polimerisasi
panas dengan penambahan serat kaca. Dentika dent J 2012; 17(1): 24-9. 25. Gürbüz Ö. Ünalan F, Kursoglu P. Water sorption of denture teeth acrylic
resin reinforced with milled glass fiber. OHDMBCS 2005; 4(4): 57-62.
26. Alla RK, Sajjan S, Alluri VR, Ginjupalli K, Upadhya N. Influence of fiber
reinforcement on the properties of denture base resins. JBNB 2013; 4: 91-7.
27. Bashi TK, Al-Nema LM. Evaluation of some mechanical properties of
reinforced acrylic resin denture base material(An In Vitro Study). Al-Rafidain
Dent J 2009; 9(1): 57-65.
28. Unalan F, Dikbas I, Gurbuz O. Transverse strength of polymethylmethacrylate
reinforcement with different forms and concentration of e-glass fibres.
OHDMBC 2010; 9(3): 144-7.
29. Lee SI, Lim YJ, Yun SD. Strength of glass fiber reinforced PMMA resin and
surface roughness change after abrasion test. J Korean Acad Prosthodont
2007; 45(3): 310-20.
30. Polat TN, Dogan DO, Topcuoglu S, Gul EB. Effect of different glass fibers on
transverse strength and elastic modulus of repairing acrylic resin.
Cumhuriyet Dent J 2013; 10: 1-9.
31. Loncar A, Vojvodic D, Komar D. Fiber-reinforced polymers part I: basics ad
32. Fonseca RB, Favarao IN, Kasuya AVB, Abrao M, Luz NFM Da, Naves LZ.
Influence of glass fiber wt% and silanization on mechanical flexural strength
of reinforced acrylics. J of Materials Science and Chemical Engineering 2014;
2: 11-5.
33. Vallitu PK, Lassila VP, Lappalainen R. Acrylic resin-fiber composite-part I:
The effect of fiber concentration on fracture resistance. The Journal of
Prosthetic dentistry 1994; 10(1): 607-12.
34. Ariyani, Tamin H dan Indra M. Pengaruh penambahan fiber glass reinforced terhadap penyerapan air dan stabilitas warna bahan basis gigitiruan nilon
termoplastik. Dentika Dental Journal 2013;17(3): 239-45.
35. Stipho HD. Effect of glass fiber reinforcement on some mechanical properties
of polymerizing polymethyl methacrylate. The Journal of Prosthetic Dentistry
1998; 79(5): 580-4.
36. Zortuk M, Kilic K, Uzun G, Ozturk A, Kesim B. The effect of different fiber
concentrations on the surface roughness of provisional crown and Fixed
Partial Denture. European Journal of Dentistry 2008 ; 2 : 185-90.
37. Tacir IH, Kama JD, Zortuk M, Eskimez S. Flexural properties of glass fibre
reinforced acrylic resin polymers. J Australian Dent 2006; 51(1): 52-6.
38. Noort R. Introduction to dental materials. 3rd ed. London: Elsevier, 2007: 216-7.
39. Wikipedia. Nylon. (05 September 2014) http://en.wikipedia.org/wiki/Nylon. 40. Kortrakulkij K, Kanchanavasita W. Effect of denture cleanser on color
stability and flexural of three denture base materials. Mahidol Dent J 2008;
29(1):23-8.
41. Chhnoeum T, Kanchanavasita W. Effect of denture cleanser on surface
hardness and roughness of 3 denture base materials. Mahidol Dent J 2008;
29(1): 29-35.
43. Abuzar MA, Bellur S, Duong N, Kim BB, Lu P, Palfreyman N, dkk.
Evaluating surface roughness of a polyamide denture base material in
comparison with poly (methyl methacrylate). J of Oral Science 2010; 52(4):
577-81.
44. Thakral GK, Aeran H, Yadav B, Thakral R. Flexible partial dentures-A hope
for the challenged mouth. People’s Journal of Scientific Research 2012; 5(2);
55-9.
45. Mareti D. Pengaruh penambahan serat kaca terhadap kekuatan transversal dan modulus elastisitas bahan basis gigitiruan resin akrilik polimerasasi panas.
Skripsi. Medan: Universitas Sumatera Utara,2010.
46. Pero AC, Marra J, Paleari AG, Souza RF de, Ruvolo-Filho A, Compagnoni
MA. Reliability of a method for evaluating porosity in denture base resins. Gerodontology 2011;28: 127-33.
47. Fonseca RB, Marques AS, Olivia BK de, Carlo HL, Naves LZ. Effect of glass
fiber incorporation on flexural properties of experiment composites. BioMed
Research Int 2014:1-6.
48. Lee SI, Kim CH, Kim YS. Effects of chopped glass fiber on the strength of
heat-cured pmma resin. J Korean Acad Prosthodont 2001; 39(6): 589-98.
49. Rezvani MB, Atai M, Hamze F. Effect of fiber diameter on flexural properties
of fiber-reinforced composites. Indian J of Dent Research 2013; 24(2):237-41.
50. Vojdani M , Khaledi AAR. Transverse strength of reinforced denture base
resin with metal wire and e-glass fibers. J of Dentistry 2006; 3(4):167-72.
51. Vallittu PK. Glass fiber reinforcement in repaired acrylic resin removable
dentures:Preliminary results of a clinical study. Quintessence Int 1997; 28(1):
39-44.
52. Dagar SR, Pakhan AJ, Thombare RU, Motwali BK. The evaluation of flexural
strength and impact strength of heat-polymerized polymethyl methacrylate
denture base resin reinforced with glass and nylon fibers: An in vitro study.
53. Tham WL, Chow WS, Ishak ZAM. Simulated body fluid and water
absorption effects on poly (methyl methacrylate) / hyrdoxyapatite denture
base composites. EXPRESS Polymer Letters 2010;4(9): 517-28.
54. McCabe JF, Rusby S. Water absorption, dimentional change and radial
pressure in resin matrix dental restorative materials. Biomaterials 2004; 25:
4001-7.
55. Hanafiah KA. Rancangan percobaan: teori dan aplikasi. Edisi 3. Jakarta: PT Raja Grafindo Persada, 2003:9.
56. Gurbuz O, Unalan F, Dikbas I. Comparison of the transverse strength of six
acrylic denture resins. OHDMBC 2010; 9(2): 21-4.
57. Hyer MW. Stress Analysis of Fiber-Reinforced Composite Materials. Singapore: McGraw-Hill, 1998 : 18-28.
58. Notoatmodjo S. Metodologi Penelitian Kesehatan.Jakarta: PT Rineka Cipta, 2010 : 29,50.
59. Soygun K, Bolayir G, Boztug A. Mechanical and Thermal Properties of
Polyamide Versus Reinforced PMMA Denture Base Materials. J Adv