DAFTAR PUSTAKA
Andriyanti, W, Darsono, Wisjachudin Faisal “Kajian Metode Vulkanisasi Lateks Karet Alam Bebas Nitrosamin dan Protein Alergen”. Pusat Teknologi Akseelerator dan Proses Bahan – BATAN. ISSN 0216 – 3128, hal: 161 : 169, 2010.
Awang, Roila, Cheong Kok Whye, Mahiran Basri, Rosnah Ismail, Razmah Ghazali and Salmiah Ahmad. “Alkanolamides from 9, 10 - Dihydroxystearic Acid”. Journal of Oil Palm Research, Vol. 18, hal 231 – 238, 2006.
Alalkawi, Hussain J. M, Zainab K. Hantoosh and Raad H. Majid. “The Tensile and Fatigue Properties of Vulcanized Natural Rubber Under Ambiant Temperatures”
Diyala Journal of Engineering Sciences. Vol. 03, No. 02, hal 16 – 24, 2010.
Akbar Fauzi, Zulisman Anita, Hamidah Harahap “ Pengaruh Waktu Simpan Film Plastic Biodegradasi Pati Kulit Singkong Terhadapp Sifat Mekanikanya”. Jurnal Teknik Kimia USU, Vol. 2. No. 2. 2013.
Ahmad Azizan, Dahlan Hj. Mohd and Ibrahim Abdullah. “Electron Beam Crosslingking of NR/LLDPE Blends”. Iranian Polymer Journal Vol. 14, No. 6, hal 505-510, 2005.
Abraham, E., Deepa, B., Pothan, L. A., John, M., Narine, S. S., Thomas, S., and Anandjiwala, R. “Physicomechanical properties of nanocomposites based on cellulose nanofibre and natural rubber latex”. Cellulose, 20(1), 417-427. 2013
Ahmad Azizan, Dahlan Hj. Mohd and Ibrahim Abdullah. “Electron Beam Crosslingking of Carbon Black (CB) Filled NR/LLDPE Blends I. Effects of Fileer Loading”. Journal Sains Nuklear Malaysia. Vol. 20, No. 1&2, hal 70-84, 2002
Aguele Felix Osarumhense, Justice Agbonayinma Idiaghe, Tochukwu Uzoma Apugo-Nwosu. “A Study of Quality Improvement of Natural Rubber Products by Drying Method”. Journal of materials science and chemical engineering, No. 3, hal: 7-1, 2015.
Boondamnoen. O, Azlan Ariffin, Azura A. Rashid, Masahiro Ohshima, Saowaroj Chuayjuljit3. “Effect Of Polystyrene-Modified Natural Rubber (SNR) On Mechanial Properties Of Waste Natural Rubber Latex/Polystyrene Blend (WNRL/PS)”. 2010.
Cherian, E. and Jayachandran, K. “Microbial Degradation of Natural Rubber Latex by a Novel Species of Bacillus Sp. SBS25 isolated from soil. Int. J. Environ. Res., 3(4): 599 – 604, Autumn 2009.
Dewi Indah Ratna, Herminiwati. “Lateks Karet Alam Untuk Sol Sepatu: Metode Pembuatan Sifat Mekanik dan Morfologi”. 2014.
Fachry, A Rasyidi, Tuti Indah Sari, Bobi Andika Putra dan Dwi Aji Kristianto. “Pengaruh Penambahan Filler Kaolin Terhadap Elastisitas dan Kekerasan Produk Souvenir dari Karet (Havea Brasiliense)”. Prosiding SNTK TOPI. ISSN. 1907 – 0500, 2012.
Gregorova, Adriana, Michal Machovsky and Rupert Wimmer. “Viscoelastic Properties of Mineral-Filled Poly(lactic acid) Composites”. International Journal of Polymer Science, Vol. 6, 2012.
Hidayat Cecep. “ Peluang penggunaan kulit singkong sebagai pakan unggas”.
Seminar nasional teknologi peternakan dan veteriner, 2009.
Harahap. H, “A Comparative Study on The Effect of Compounded Latex and Diffusion of Curatives on Tensile Properties of Natural Latex Film”. Jurnal Teknologi Proses, Media Publikasi Karya Ilmiah Teknik Kimia. ISSN 1412-7814, hal 27-30, 2006.
H. Harahap, K. Hadinatan, A. Hartanto, I. Surya, M. Ginting. “The Effect Of Drying Temperature On Mechanical Properties Of Natural Rubber Latex Products With Cassava Peel Waste Powder Modified Alkanolamide”. Journal of engineering science and technology special issue on SOMCHE 2014 & RSCE 2014 Conference, January (2015) 53 – 63 @ School of Engineering, Taylor’s University.
Kamil. E, Emelya Khoesoema, Hamidah Harahap “pengaruh pencuacaan alami terhadap produk lateks karet alam berpengisi tepung kulit pisang yang diputihkan dengan hydrogen peroksida”. Jurnal Teknik Kimia USU. Vol 1. No. 2. 2012.
Kamil, Erick, Emelya Khoesoema, dan Hamidah Harahap. “Pengaruh Biodegradasi dengan Teknik Penanaman terhadap Produk Lateks Karet Alam Berpengisi Tepung Kulit Pisang yang Diputihkan dengan hidrogen Peroksida”. Jurnal Teknik Kimia USU, Vol. 1. No. 2, hal: 11 – 15, 2012.
Lake J. A, Cedar Crest, NM (US), Samuel David Adams, Albuquerque, NM(US). “Chemical Additives to Make Polymeric Materials Biodegradable” United States Patent. No. US 8,513,329 B2. 2008.
Lake J. A, Cedar Crest, NM (US); Samuel David Adams, Albuquerque, NM (US). ‘Chemical additives to make polymeric materials biodegradable”. Patent No. US 8,513,329 B2. 2013.
Marcia, Nitschke and Glaucia Maria Pastore. “Production and Properties of a Surfactant Obtained From Bacillus Subtilis Grown On Cassava Wastewater”.
Bioresource technology. Vol. 9, hal: 336-341, 2006.
Muhammad N. H, Ibrahim Abdullah & Dahlan Hj. Mohd. “Effect of Electron Beam Irradiation on Natural Rubber/Linier Low Density Polyethylene Blends with M-Phenylenebismaleimide”. Sains malaysiana 40 (7)2011, 685-689, 2011.
Moncino et al. “Reduced Allergenicity of Natural Latex Product”. United States Patent Application Publication. Pub. No. US 2014/0148553 A1. 2014.
Moonchai, Darinya, Natthapong Moryadee and Nipon Poosodsang. “Comparative Properties Of Natural Rubber Vulcanisates Filled with Defatted Rice Bran, Clay and Calcium Carbonate” Maejo International Journal of Science and Technology. Vol. 6. No. 02, hal 249 – 258, 2012.
M.M. Afiq. A.R. Azura. “Effect of Sago Starch Loadings on Soil Decomposition of Natural Rubber Latex (NRL) Composite Films Mechanical Properties”. International biodeterioration & biodegradation. Vol 85, hal : 139 - 149, 2013.
Nuraya A.S. Siti, A.Baharin, A.R. Azura, M.H. Mas Rosemal Hakim, I. Mazlan, M. Adnan and A.A. Nooraziah “Reinforcement of Prevulcanized Natural Rubber Latex Film by Banana Stem Powder and Comparison and Calcium Carbonate”. J. Rubb. Res., Vol. 15, No. 2. hal: 124-140, 2012.
Oladipo J.D, Adams J.D and Akinwande J. T. “Using Cassava Peelings to Reduce Input Cost of Concrete: A Waste to Wealth Initiative in Southwestern Nigeria”. Vol. 3. No. 4, hal: 511-516, 2013.
Obadina A.O, Oyewole O.B, Sanni L. O and Abiola S.S. “Fungal Enrichment Of Cassava Peels Proteins”. African Journal of Biotechnology Vol. 5. No. 3. hal: 302-305. 2006.
Purbaya, Mili, Tuti Indah Sari, Chessa Ayu Saputri dan Mutia Tama Fajriaty “Pengaruh Beberapa Jenis Bahan Penggumpal Lateks dan Hubungannya dengan Susut Bobot, Kadar Karet Kering dan Plastisitas”. Prosiding seminar Nasional AvoER ke-3. 2011.
Premraj R and Mukesh Doble. “Biodegradation of Polymers”. Indian journal of biotechnology. Vol. 4. No. 186-193. 2005
Rho, Ho Sik, Heung Soo Baek, Duck Hee Kim and Ih Seop Chang. “A Convenient Method for the Preparation of Alkanolamides”. Bull Korean Chem. Soc. Vol. 27. No. 4, hal: 584 – 586, 2006.
Roslim, R, M. Y, Amir Hasyim and P. T. Augurio. “Natural Latex Foam” Journal of Engineering Science. Vol. 8, hal: 15 – 27, 2012.
Rifaat. H.M., M.A. Yosery. ”Identification And Characterization Of Rubber Degrading Actinobacteria”. Applied ecology and environmental research, Vol. 2. No.1, hal: 63-70, 2004.
Rose S.M.L and Evelise Fonseca Santos. “Studies on the Properties of Rice-Husk- Filled - PP Composite- Effect of Maleated PP”. Material Research, Vol 12, No.3, 333-338, 2009.
Rose and Steinbuchel. “Biodegradation of Natural Rubber and Related Compounds: Recent Insights into a Hardly Understood Catabolic Capability of Microorganisms”.
Appl. Environ. Microbiol. Vol. 71, No. 6, 2803-2812, June 2005.
Sarkhel G & Sanjay Manihi, 2013. “Compatibilizier on the Dynamic Mechanical and Electrical Properties of Kaolin Clay Reinforced EPDM Rubber”. Sains Malaysiana
42(2), 495-501, 2013.
Surya. I, H. Ismail, A.R. Azura. “Alkanolamide As An Accelerator, Filler-Dispersant And A Plasticizer In Silica-Filled Natural Rubber Compounds”. Jurnal homepage:
Stellescu M. D, Mihai Georgescu and Elena Manaila. “Aspects Regarding Crosslinking of a Natural Rubber Blend”. Icams 2010-3th Internasional Comference On Advanced Material And System. 2010.
Tandy E, Ismail Fahmi Hasibuan, Hamidah Harahap. “Kemampuan asorben limbah lateks karet alam terhadap minyak pelumas dalam air”. Jurnal Teknik Kimia USU, Vol. 1. No. 2. 2012.
Tampubolon H. R, Darwis Syarifuddin Hutapea dan Indra Surya. “Pengaruh Penambahan Alkanolamida Terhadap Karakteristik Pematangan dan Kekerasan Vulkanisat Karet Alam Berpengisi Silika”. Jurnal Teknik Kimia USU. Vol. 1. No. 2, Hal: 7 – 10, 2012.
Tambunan F. E dan Hamidah Harahap. “Pengaruh suhu vulkanisasi dan komposisi bentonite clay yang dimodifikasi dengan alkanolamida dari bahan baku RBDPKO pada produk lateks karet alam”. Jurnal Teknik Kimia USU, Vol. 4. No. 4. 2015.
Trenkel, M. E. “Slow- and Controlled-Release and Stabilized Fertilizers: An Option for Enhancing Nutrient Use Efficiency in Agriculture”. International Fertilizer Industry Association (IFA). Paris, France, 2010.
Thitithammawong, Anoma, Nattapon Uthaipan and Adisai Rungvichaniwat. “The Effect of The Rations of Sulfur to Peroxide in Mixed Vulcanization System on The Properties of Dynamic Vulcanized Natural Rubber and Polypropylene Blends”.
Songklanakarin Journal of Science and Technology. Vol. 34. No. 6, hal: 653 – 662, 2012.
Ugbesia, Stella, M. Sc, Lawrence O. Ekebafe, M.Sc dan M. D. Ayo, M. Sc. “Effect of Carbonization Temperature of Filler on The Tensile Properties of Natural Rubber Compounds Filled With Cassava (Manihot Esculenta) Peel Carbon” The Pasific Journal of Science and Technology. Vol. 12. No. 1, hal: 339-343, 2011.
