xix
DAFTAR PUSTAKA
[1]A. J. de, Oliveira, A. E., Diniz and Ursolino, D. J. 2009. Hard Turning in Continuous and interrupted cut with PCBN and Whisker-Reinforced Cutting Tools. Journal of Materials Processing Technology 209, pp 5262-5270.
[2]A. S., More, Jiang, W., Brown, W.D., and Malshe, A.P., 2006. Tool Wear and Machining Performance of CBN TiN Coated Carbide Inserts and PCBN Compact Inserts in Turning AISI 4340 Hardened Steel. Journal of materials Processing Technology 180, pp. 253-262.
[3]A. Schey, John. 2009. Process Manufaktur, Edisi ketiga. Diterjemahkan oleh: Rines, Indah Sri Utami dan Basuki Heri Winarno. Yogyakarta: Penerbit Andi.
[4]Arnell, R.D., Kelly, P.J. and Bradley, J.W. 2004. Recent Developments in Pulsed Magnetron Sputtering, Surface and Coatings Technology, 188-189, p.158
[5]Azom. 2004. AISI 1045 Medium Carbon Steel. From: http://www.azom.com/article.aspx?ArticleID=6130. 30 Maret 2016 [6]Bh, Varaprasad, Srinivasa Rao. Ch, P.V. Vinay. 2014. Effect of Machining
Parameters on Tool Wear in Hard Turning of AISI D3 Steel. Procedia Engineering 97, pp. 338-345.
[7]Black, J.T., and Ronald A.Kohser. 2008. Degarmo’s Materials and Processes in Manufacturing. Tenth edition. United States of America: John Willeys and Son Inc.
[8]Boothroyd, G. 1997. Fundamentals of Machining and Machine Tools. Marcel Dekker. New York.
[9]Daryanto. 2011. Teori Kejuruan Teknik Mesin Perkakas. Bandung: Penerbit Satu Nusa
[10]Coppini, N.L, A.E. Diniz, M.Bonandi, E.M. De Souza dan E.A. Baptista. 2013. Hard Turning of Sintered Cemented Carbide Parts: A Shop Floor Experience. Procedia CIRP, Volume 8, pp. 368-373.
xx
[11]Handawi Saad Elmunafi, Mohamed, M.Y. Noordin, and D. Kurniawan. 2015.Tool Life of Coated Carbide Cutting Tool when Turning Hardened Stainless Steel under Minimum Quantity Lubricant using Castor Oil. Procedia Manufacturing 2, pp 563-567
[12] Kalpakjian, Serope and R.Schmid, Steven. 2009. Manufacturing Engineering and Technology, sixth edition. New York: Prentice Hall.
[13]K. Shihab, Suha, Zahid A. Khan, Aas Mohammad and Arshad Noor Siddiqueed. RSM Based Study of Cutting Temperature during Hard Turning with Multilayer Coated Carbide Insert. Procedia Material Science, pp. 1233-1242.
[14]Labondre, Rajshekhar, Prasad Krishna and Mohankumar G.C. 2013.
Machinability Studies of Low Alloy Steels by Face Turning Method: An Experimental investigation. Procedia Engineering, pp 632-641.
[15]Rochim, Taufiq. 1993. Teori & Teknologi Proses Permesinan. Bandung: Penerbit ITB.
[16]Sargade, V.G., Gangopadhyay, S., Paul, S., and Chattopadhyay, A.K. 2011.
Effect of Coating Thickness and Performance of TiN Film Deposited on Cemented Carbide Inserts Using CFUBMS. Material and Manufacturing Processes 26, p.1.
