DAFTAR PUSTAKA
[1]Coppini, N.L., et al. 2013. Hard Turning of Sintered Cemented Carbide: A Shop Floor Experience. Procedia CIRP, Volume 8, pp. 368-373.
[2]Gokulachandran,J and Mohandas, K. 2012. Application of Regression and Fuzzy Logic Method for Predicition of Tool Life. Procedia Engineering 38. Pg. 3900-3912
[3]J. de, Oliveira, A. E., Diniz and Ursolino, D. J. 2009. Hard Turning in Continous and interrupted cut with PCBN and Whisker-Reinforced Cutting Tools. Journals of Materials Processing Technology 209, pp. 5262-5270.
[4]Rao,C.J., Sreeamulu,D. And Mathew,A.T. 2014. Analysis of Tool Life during Turning Operation by Determining Optimal Process Parameters. Procedia Engineering 97. Pg 241-250.
[5]Sargade, V.G., et al. 2011. Effect of Coating Thickness and Performance of TiN Film Deposited on Cemented Carbide Inserts Using CFUBMS. Material and Manufacturing Processes 26, p.1.
[6]Sivarajan, S. and Padmanabhan, R. Green Machining and Forming by the use of Surface coated tools. Procedia Engineering 97(2014) 15-21.
[7]Varaprasad. Bh et al. Effect of Machining Parameters on Tool Wear in Hard Turning of AISI D3 Steel. Procedia Engineering 97 (2014) 338-345.
[8]Boothroyd, G. 1997. Fundamentals of Machining and Machine Tools. Marcel Dekker. New York.
[9]Douglas C. Montgomery. 2012. Design and Analysis of Experiments, Arizona State University. John Wiley & Sons, Inc.
[10]Kalpakjian, Serope and R.Schmid, Steven. 2009. Manufacturing Engineering and
Technology, sixth edition. New York: Prentice Hall.
[11]Rochim, Taufiq. 2001. Spesifikasi, Metrologi, dan Kontrol Kualitas Geometrik. Institut Teknologi Bandung.
[12]Rochim, Taufiq. 1993. Teori dan Teknologi Proses Pemesinan. Institut Teknologi Bandung.
[13]S. Lou, Mike., et al. 1998. Surface Roughness for CNC End – Turning, Journal of Technology. Kaohsiung Taiwan: Cheng Shiu College of Technology.
