DAFTAR PUSTAKA
Arikunto, Suharsimi. Prosedur Penelitian. Jakarta: PT. Rineka Cipta. 2006.
David, G. C. Ergonomic Methods for Assessing Exposure to Risk Factors for Work-Related Musculoskeletal Disorders. Occupational Medicine Journal 2005;55:190–199
Franklin, Derrick, dkk. Investigation of Ergonomic Improvements for Manual Material Handling of Heavy Awkward Loads on a Loading Dock : Journal’s
University of Utah. 2008
Freivalds, Andris. Niebel’s Methods, Standards, and Work Design, Twelfth Edition. New York: McGraw-hill. 2003.
Health and Safety Executive. Further Development of the Usability and Validity of the Quick Exposure Check (QEC) : University of Surrey. 2005
Kudryk, Ian. A Biomechanical Analysis of A Specialized Load Carriage Technique and the Development of An Assistive Load Carriage Device. Kanada : Queen’s
University. 2008
Li, G. and Buckle, P. 1998. The Development of a Practical Method for the Exposure
Assessment of Risks to Work-Related Musculoskeletal Disorders. HSE Books.
Suffolk
(http://www.hse.gov.uk/research/content/crr/1999/crr99251.htm)
Li, G. and Buckle, P. Quick Exposure Checklist (QEC) for the Assessment of Workplace Risks for Work-Related Musculoskeletal Disorders (WMSDs). In :
Stanton, N., Hedge, A., Brookhuis, K., Salas, E. and Hendrick, H. editors. Handbook of Human Factors and Ergonomics Methods. USA : CRC PRESS.
p. 6.1-6.10. 2005.
Mirmohamadi, J Nasl Seraji. Evaluation of Risk Factors Causing Musculoskeletal Disorders Using QEC Method in a Furniture Producing Unite : Journal of
Iranian J Publ Health, Vol. 33, No. 2, pp.24-27, 2004
Muslimah, Etika. Analisis Manual Material Handling Menggunakan Niosh Equation. Jurnal Ilmiah Teknik Industri : Vol. 5 No. 2. Universitas Muhammadiyah Surakarta. 2006
Wijana, Nyoman. Teaching and Learning Science through Ergonomic Approach Reduces Musculoskeletal Complaint, Boredom, Fatigue, and Increases
Motivation and Achievement of Learning among Elementary School Students
No. 1 Sangsit Sawan District Buleleng Regency. Medical Science. Jurnal
Ergonomi : Udayana University. 2007
Purnomo, Hari. Work System Using Total Ergonomic Approach Reduces Musculoskeletal Complaint, Fatigue, Workload, And Increases The Workers
Productivity Of Ceramic Industry In Kasongan, Bantul. Medical Science.
Jurnal Ergonomi : Udayana University. 2007
Sinulingga, Sukaria. Metode Penelitian. Medan: USU Press. 2011.
Sanders, M.S.; McCormick, E.J. Human Faktors in Engineering and Design. New York: McGraw-hill. 1987.
Santoso, Gempur. Ergonomi Manusia, Peralatan dan Lingkungan. Surabaya: PT. Guna Widya. 2004.
Sastrowinoto, Suyatno. Meningkatkan Produktivitas dengan Ergonomi. Jakarta: PT. Pustaka Binaman Pressindo. 1985.
Suma’mur, P.K. Keselamatan Kerja dan Pencegahan Kecelakaan. Jakarta: CV. Masagung. 1984.
Sutalaksana, I.Z, dkk. Teknik Tata Cara Kerja. Bandung: ITB. 1979.
Tarwaka, Solichul, dkk. Ergonomi untuk Keselamatan, Kesehatan Kerja dan Produktivitas. Denpasar: Universitas Udayana. 2004.
Wignjosoebroto, Sritomo. Ergonomi, Studi Gerakan dan Waktu. Surabaya: PT Guna Widya. 1995.
Worths, Butter. Applied Ergonomi Handbook. London: Loughborough University of Technology. 1989.
Woods, P Buckle, dkk. Development of the Quick Exposure Check (QEC) : Robens Centre for Health Ergonomics, EIHMS, University of Surrey. Guildford, GU2 7TE UK