Page 1 of 14
Revisi 0 (2 November 2016)
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
1.1 Implementasi SNI ISO/IEC 17025:2008 4000 2 10-11 1-2 2-3 4-5 2-3 6-7 4-5 1-2 5-6 3-4 1-2 5-6
1.2 Dokumentasi SNI ISO/IEC 17025:2008 4000 2 12-13 7-8 7-8 6-7 4-5 8-9 6-7 3-4 7-8 5-6 7-8 7-8
1.3 Internal Audit SNI ISO/IEC 17025:2008 4000 2 17-18 9-10 9-10 11-12 9-10 13-14 11-12 8-9 12-13 12-13 9-10 12-13
1.4 Implementasi ISO/IEC 17020:2012 4000 2 19-20 16-17 18-19 13-14 14-15 14-15
1.5 Dokumentasi ISO/IEC 17020:2012 4000 2 14-15 12-13 15-16 10-11 17-18 21-22
1.6 Internal Audit ISO/IEC 17020:2012 4000 2 24-25 21-22 23-24 20-21 19-20 23-24
1.7 Implementasi SNI ISO 15189:2009 4000 2 16-17 18-19 20-21 15-16 26-27 14-15
1.8 Dokumentasi SNI ISO 15189:2009 4000 2 25-26 30-31 16-17 27-28 26-27 28-29
1.9 Internal Audit SNI ISO 15189:2009 4000 2 21-22 20-21 21-22 22-23 10-11 19-20
1.10 Teknik Investigasi dan Closing Temuan Asesmen Lab 4000 2 26-27 14-15 30-31 19-20 28-29 14-15
1.11 Sistem Manajemen Informatika Laboratorium 4500 2 23-24 25-26 7-8 24-25 19-20 6-7
1.12 Teknik Supervisi dan Inspeksi Mutu 4000 2 11-12 23-24 3-4 25-26 6-7 21-22
1.13 Teknik Analisis Data di Laboratorium 4000 2 2-3 27-28 14-15 29-30 24-25 13-14
1.14 Sistem Pengukuran dan Kalibrasi 4500 2 8-9 5-6 21-22 30-31 4-5 20-21
1.15 Teknik Kalibrasi Volumetric Glassware 4500 2 18-19 29-30 17-18 5-6 13-14 29-30
1.16 Teknik Kalibrasi Massa (Timbangan) 4500 2 15-16 12-13 8-9 2-3 11-12 21-22
1.17 Teknik Kalibrasi Massa (Anak Timbangan) 4500 2 25-26 8-9 23-24 12-13 27-28 2-3
1.18 Teknik Kalibrasi Gaya (Proving Ring) 4500 2 22-23 19-20 13-14 9-10 18-19 12-13
1.19 Teknik Kalibrasi Gaya (Load Cell) 4500 2 5-6 15-16 9-10 19-20 14-15 8-9
1.20 Teknik Kalibrasi Tekanan (Pressure Gauge Analog Oil/Pneumatic) 4500 2 9-10 26-27 21-22 23-24 25-26 7-8 1.21 Teknik Kalibrasi Tekanan (Pressure Gauge Digital Oil/Pneumatic) 4500 2 10-11 22-23 4-5 26-27 19-20 15-16 1.22 Teknik Kalibrasi Dimensi (Micrometer & Caliper) 4500 2 19-20 29-30 16-17 11-12 28-29 22-23
1.23 Teknik Kalibrasi Suhu (Termometer) 4500 2 14-15 4-5 6-7 30-31 5-6 19-20
1.24 Teknik Kalibrasi Suhu (Termokopel) 4500 2 12-13 1-2 2-3 20-21 5-6 29-30
1.25 Teknik Kalibrasi Suhu (Termohigrometer) 4500 2 22-23 18-19 15-16 1-2 17-18 14-15
1.26 Teknik Kalibrasi Suhu (Oven dan Furnace ) 4500 2 17-18 21-22 18-19 6-7 7-8 7-8
1.27 Teknik Kalibrasi pH Meter 4500 2 7-8 27-28 20-21 10-11 26-27 5-6
1.28 Teknik Kalibrasi Conductivity Meter 4500 2 24-25 16-17 3-4 13-14 19-20 16-17
1.29 Teknik Kalibrasi Listrik (Multimeter & RF Power Meter) 4500 2 16-17 6-7 7-8 15-16 11-12 7-8 1.30 Teknik Kalibrasi Listrik (Oscilloscope & Avometer Analog) 4500 2 26-27 7-8 30-31 4-5 14-15 21-22
JAN FEB MAR APR MEI JUN JUL AGT SEP OKT NOV DES
NO TRAINING BIAYA* JML
HARI
Page 2 of 14
Revisi 0 (2 November 2016)
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
1.31 Teknik Kalibrasi Listrik (Frequency Counter & Function
Generator) 4500 2 21-22 11-12 13-14 24-25 10-11 12-13
1.32 Teknik Kalibrasi Listrik (Sine Wave Generator) 4500 2 10-11 29-30 9-10 12-13 13-14 8-9
1.33 Teknik Kalibrasi Listrik (Insulation Tester & Withstanding Voltage) 4500 2 7-8 20-21 15-16 29-30 19-20 19-20
1.34 Sistem Pengukuran Air dengan Flowmeter 4500 2 16-17 25-26 20-21 10-11 3-4 7-8
1.35 Sistem Pengukuran Gas dengan Flowmeter 4500 2 19-20 2-3 18-19 20-21 19-20 16-17
1.36 Sistem Pengukuran Minyak dengan Flowmeter 4500 2 21-22 6-7 6-7 22-23 12-13 21-22
1.37 Teknik Analisis Spektrofotometri Serapan Atom (AAS) Flame 5000 2 2-3 12-13 14-16 8-9 17-18 5-6 1.38 Teknik Analisis Spektrofotometri Serapan Atom (AAS) Graphite Furnace 5000 2 24-25 14-15 23-24 25-26 28-29 21-22 1.39 Teknik Analisis Kromatografi Cair Kinerja Tinggi (HPLC) 5000 2 9-10 18-19 8-9 15-16 26-27 20-21 1.40 Teknik Analisis Kromatografi Cair Kinerja Ultra (UPLC) 5000 2 3-4 23-24 30-31 6-7 5-6 29-30
1.41 Teknik Analisis Kromatografi Gas (GC) 5000 2 14-15 27-28 13-14 3-4 3-4 13-14
1.42 Teknik Analisis Kromatografi Gas Spektrometri Massa (GC-MS) 5000 2 12-13 7-8 4-5 11-12 14-15 1-2 1.43 Teknik Analisis Inductively Coupled Plasma (ICP) OES 5000 2 23-24 4-5 20-21 23-24 18-19 19-20 1.44 Teknik Analisis Inductively Coupled Plasma (ICP) MS 5000 2 17-18 16-17 16-17 4-5 7-8 7-8
1.45 Teknik Analisis Spektrofotometri UV-Vis 5000 2 1-2 19-20 15-16 1-2 11-12 7-8
1.46 Teknik Analisis Spektrofotometri Infra Merah (IR/FT-IR) 5000 2 26-27 21-22 2-3 18-19 26-27 14-15
1.47 Teknik Analisis IC (Ion Chromatography) 5000 2 8-9 5-6 7-8 9-10 4-5 13-14
1.48 Teknik Analisis PCR-Elisa 5000 2 5-6 30-31 17-18 27-28 12-13 23-24
1.49 Teknik Analisis Scanning Electron Microscope (SEM) 5000 2 15-16 26-27 6-7 30-31 25-26 6-7
1.50 Quality Control Laboratorium 4000 2 11-12 8-9 23-24 5-6 28-29 28-29
1.51 Quality Assurance Laboratorium 4000 2 22-23 6-7 14-15 15-16 5-6 12-13
1.52 Teknik Evaluasi Hasil QC Lab dan Kompetensi Analis 4000 2 25-26 15-16 3-4 19-20 7-8 2-3
1.53 Kaji Ulang Manajemen dan Pengendalian Sistem Laboratorium 4000 2 7-8 20-21 8-9 10-11 10-11 21-22
1.54 Sampling Control for Testing Sample 4000 2 4-5 1-2 16-17 26-27 19-20 15-16
1.55 Uji Profisiensi Laboratorium (SNI-ISO/IEC 17043-2010) 4500 2 15-16 11-12 13-14 1-2 24-25 7-8 1.56 Pembuatan Contoh Uji Profisiensi dan Bahan Acuan Sekunder 4500 2 18-19 23-24 4-5 11-12 26-27 22-23
1.57 Penanganan Bahan Acuan Bersertifikat (CRM) 4500 2 21-22 4-5 6-7 24-25 17-18 14-15
1.58 Estimasi Ketidakpastian Pengukuran Analisis Kimia 4000 2 9-10 25-26 20-21 2-3 3-4 19-20
1.59 Estimasi Ketidakpastian Pengukuran pada Analisis Spektrofotometri
(UV-Vis, FT-IR, AAS) 4000 2 19-20 9-10 18-19 18-19 14-15 29-30
1.60 Estimasi Ketidakpastian Pengukuran pada Analisis Kromatografi 4000 2 14-15 18-19 15-16 9-10 12-13 5-6
JAN FEB MAR APR MEI JUN JUL AGT SEP OKT NOV DES
NO TRAINING BIAYA* JML
Page 3 of 14
Revisi 0 (2 November 2016)
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
1.61 Estimasi Ketidakpastian Pengukuran Dimensi, Massa dan Volume 4000 2 19-20 16-17 18-19 18-19 19-20 14-15 1.62 Estimasi Ketidakpastian Pengukuran Hasil Kalibrasi 4000 2 16-17 18-19 15-16 15-16 17-18 19-20 1.63 Kalibrasi, Verifikasi dan Troubleshooting pada UV-Vis 5000 2 3-4 23-24 30-31 27-28 5-6 23-24
1.64 Kalibrasi, Verifikasi dan Troubleshooting pada GC 5000 2 21-22 27-28 6-7 24-25 26-27 20-21
1.65 Kalibrasi, Verifikasi dan Troubleshooting pada GC-MS 5000 2 12-13 29-30 16-17 20-21 14-15 28-29
1.66 Manajemen Kompetensi Personil Kalibrasi 4000 2 17-18 1-2 9-10 25-26 26-27
1.67 Verifikasi dan Validasi Metode Uji Kimia 4000 2 1-2 4-5 13-14 29-30 5-6 13-14
1.68 Verifikasi dan Validasi Metode Spektrofotometri UV-Vis 4000 2 26-27 7-8 4-5 4-5 7-8 1-2
1.69 Verifikasi dan Validasi Metode Kromatografi Gas (GC) 4000 2 9-10 11-12 8-9 1-2 10-11 6-7
1.70 Verifikasi Hasil Kalibrasi & Evaluasi Intermediate Check 4000 2 5-6 9-10 23-24 13-14 12-13 9-10 1.71 Manajemen Peralatan Lab & Evaluasi Performa Alat ukur 4000 2 14-15 20-21 20-21 10-11 19-20 12-13
1.72 Implementasi K3 di Laboratorium 4000 2 10-11 14-15 2-3 6-7 28-29 16-17
1.73 Pengendalian Alat dan Bahan Kimia di Laboratorium 4000 2 23-24 25-26 7-8 3-4 24-25 7-8
2.1 Implementasi ISO 9001:2015 3800 2 24-25 2-3 1-2 5-6 17-18 14-15 11-12 8-9 6-7 4-5 2-3 5-6
2.2 Implementasi ISO 9001 + IWA 2 3800 2 4-5 7-8 9-10 12-13 23-24 21-22 18-19 10-11 13-14 5-6 7-8 7-8 2.3 Integrasi Sistem Manajemen ISO 9001, ISO 14001 & OHSAS 18001 (Sistem
PAS 99) 3800 2 14-15 19-20 6-7 15-16 17-18 20-21
2.4 Audit Internal Integrasi Sistem ISO 9001, ISO 14001 & OHSAS 1800 (Based
on ISO 19011) 4500 3 10-12 15-17 3-5 19-21 27-29 15-17
2.5 Dokumentasi ISO 9001:2015 3800 2 12-13 22-23 8-9 26-27 9-10 14-15 25-26 22-23 12-13 12-13 9-10 12-13 2.6 Internal Audit ISO 9001:2015 3800 2 18-19 8-9 15-16 6-7 16-17 8-9 27-28 24-25 19-20 19-20 14-15 14-15
2.7 Document Control 4000 2 25-26 22-23 23-24 5-6 26-27 21-22
2.8 E-document Management System 4000 2 5-6 29-30 30-31 12-13 28-29 29-30
2.9 Teknik Menyusun Standard Operating Procedure (SOP) 4000 2 15-16 25-26 13-14 30-31 24-25 19-20
2.10 5S Toyota Production Systems (KAIZEN) 4000 2 7-8 20-21 7-8 2-3 26-27 21-22
2.11 Implementasi 5S (Seiro, Seiton, Seiso, Seiketsu, Shitsuke) 4000 2 11-12 21-22 2-3 4-5 2-3 13-14 19-20 9-10 5-6 4-5 1-2 20-21 2.12 Implementasi 6S (5S + Safety) 4000 2 17-18 9-10 21-22 18-19 18-19 15-16 26-27 3-4 7-8 11-12 8-9 13-14 2.13 HORENSO (Houkoku-Renraku-Soudan) Japanese Communication System 4000 2 16-17 27-28 20-21 8-9 18-19 6-7
2.14 Zero Defect with Poka Yoke 4000 2 24-25 9-10 4-5 4-5 14-15 15-16
2.15 Executive Introduction of ISO/TS 16949:2009 4000 2 3-4 15-16 3-4 13-14 12-13 22-23
2.16 Total Quality Management (TQM) 4000 2 23-24 11-12 8-9 23-24 25-26 5-6
2.17 Executive Awareness of Six Sigma Program 4000 2 10-11 23-24 9-10 18-19 19-20 29-30
AGT SEP OKT NOV DES MAR APR MEI JUN JUL
NO TRAINING JAN FEB
2. QUALITY & PRODUCTION
BIAYA* JML HARI
Page 4 of 14
Revisi 0 (2 November 2016)
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
218 Six Sigma Quality Using R (Open Source Software) 4000 2 21-22 26-27 20-21 22-23 19-20 5-6
2.19 Lean Six Sigma 4000 2 24-25 21-22 23-24 20-21 19-20 16-17
2.2 Acceptance Sampling Plan (ISO 2859, MIL STD 105E & 414) 4500 2 26-27 23-24 23-24 4-5 16-17 6-7 25-26 24-25 26-27 24-25 21-22 7-8 2.21 Acceptance Sampling Plan (ASQ) 4500 2 19-20 16-17 29-30 12-13 18-19 8-9 27-28 29-30 28-29 26-27 23-24 12-13 2.22 Statistical Process Control & Capability Analysis with MINITAB 4000 2 10-11 7-8 2-3 18-19 2-3 13-14 11-12 10-11 12-13 10-11 7-8 14-15 2.23 Statistical Process Control & Capability Analysis with MS EXCEL 4000 2 5-6 2-3 7-8 25-26 4-5 15-16 13-14 15-16 5-6 12-13 14-15 19-20
2.24 Measurement System Analysis (MSA) with MINITAB 4000 2 9-10 6-7 21-22 3-4 17-18 21-22
2.25 Improvement with Quality Control Circle (QCC) 4000 2 17-18 16-17 9-10 18-19 14-15 9-10
2.26 Design of Experiment (DoE) 4500 2 14-15 11-12 7-8 8-9 19-20 6-7
2.27 Design of Experiment (DoE) for Pharmaceutical 4500 2 22-23 18-19 14-15 10-11 3-4 13-14
2.28 Managing Failure with Failure Mode and Effect Analysis (FMEA) 4000 2 12-13 9-10 3-4 4-5 5-6 28-29 2.29 Managing Failure with P-M and Why - why Analysis 4000 2 18-19 14-15 18-19 6-7 12-13 29-30 2.30 Failure Analysis with Fault Tree Analysis (FTA) & Root Cause Failure 4000 2 1-2 5-6 6-7 15-16 17-18 20-21 2.31 Pengolahan dan Analisis Proses dengan Statistika Industri 5000 2 25-26 1-2 30-31 5-6 6-7 1-2
2.32 Pengolahan dan Analisis Data Kegagalan 5000 2 8-9 20-21 15-16 23-24 4-5 7-8
2.35 Designing Products and Services with Quality Function 4000 2 11-12 8-9 9-10 12-13 27-28 8-9
2.33 Product Development with APQP and PPAP 4000 2 15-16 25-26 8-9 24-25 11-12 19-20
2.34 Basic of Project Management 4000 2 22-23 6-7 13-14 29-30 18-19 12-13
2.35 Project Management using Microsoft Project 2010 4000 2 18-19 15-16 16-17 19-20 14-15 15-16
2.37 Project Cost & Budgeting Strategies 4000 2 24-25 22-23 18-19 26-27 19-20 22-23
2.38 Developing Effective Maintenance with Reliability-centred Maintenance 4000 2 26-27 29-30 2-3 11-12 26-27 29-30
2.39 Maintenance Priority Index (MPI) dengan Proses SERP 4000 2 16-17 11-12 21-22 1-2 25-26 21-22
2.40 Achieving Zero Breakdown with Total Productive Maintenance 4000 2 10-11 16-17 9-10 20-21 5-6 2-3 2.41 Manajemen Pemeliharaan Peralatan Industri Berbasis Komputer (CMMS) 4000 2 21-22 18-19 14-15 3-4 5-6 5-6
2.42 Lean Manufacturing 4000 2 23-24 5-6 8-9 9-10 10-11 14-15
2.43 Formulating Strategy-Based Initiatives with Balanced Scorecard 4000 2 17-18 21-22 4-5 6-7 14-15 7-8
2.44 Cost of Quality Executive Overview 4000 2 19-20 30-31 9-10 13-14 12-13 9-10
2.45 Business Process Reengineering 4000 2 14-15 12-13 6-7 15-16 26-27 6-7
2.46 Strategic Cost Reduction for Competitive Advantage 4000 2 24-25 9-10 18-19 18-19 28-29 14-15
2.47 Manufacturing Performance Indicator 4000 2 9-10 19-20 15-16 22-23 3-4 13-14
2.48 Continous Improvement Proses Produksi dengan Simulasi Promodel 4000 2 25-26 21-22 23-24 25-26 26-27 16-17
2.49 Teknik Pengendalian Korosi 4500 2 7-8 26-27 13-14 24-25 5-6 20-21
2.50 Teknik Pengujian Tabung LPG 4500 2 11-12 7-8 16-17 20-21 19-20 21-22
JAN FEB MAR APR MEI JUN JUL AGT SEP OKT NOV DES BIAYA* JML
HARI
Page 5 of 14
Revisi 0 (2 November 2016)
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
3.1 ROLLER BEARINGS
(Basic, Operation, Maintenance and Troubleshooting) 6000 3 3-5 29-31 2-4 11-13 13-15 1-3
3.2 STEAM BOILERS
(Operation, maintenance and troubleshooting) 6000 3 1-3 25-27 20-22 1-3 3-5 5-7
3.3 TURBO COMPRESSORS
(Operation, Maintenance and Troubleshooting) 6000 3 18-20 7-9 17-19 25-27 26-28 14-16
3.4 DYNAMIC PUMPS
(Operation, Maintenance and Trouble Shooting) 6000 3 14-16 19-21 6-8 22-24 18-20 13-15
3.5 STEAM TURBINES
(Operation, maintenance and troubleshooting) 6000 3 10-12 15-17 3-5 4-6 5-7 28-30
3.6 INDUSTRIAL GAS TURBINES
(Operation, Maintenance and Troubleshooting) 6000 3 22-24 11-13 14-16 8-10 10-12 19-21
3.7 Implementasi SCADA pada Instalasi Industri 4500 2 9-10 6-7 8-9 3-4 5-6 7-8
3.8 Motor Induksi (Maintenance & Troubleshooting) 4500 2 25-26 21-22 9-10 20-21 6-7 7-8
3.9 Hydraulic Power System 4500 2 2-3 4-5 13-14 15-16 11-12 12-13
3.10 Belt Conveyor (Maintenance & Troubleshooting) 4500 2 12-13 7-8 16-17 6-7 13-14 16-17
3.11 Vibration Analysis and Troubleshooting 4500 2 17-18 9-10 23-24 13-14 19-20 21-22
3.11 Combustion and Burner 4500 2 21-22 27-28 20-21 24-25 17-18 21-22
3.12 Teknik Lubrikasi 4500 2 19-20 23-24 30-31 18-19 27-28 28-29
3.13 Pipeline (Testing, Inspection and Maintenance) 4500 2 14-15 18-19 7-8 1-2 24-25 20-21
3.14 Electrical Safety System 4500 2 16-17 20-21 14-15 10-11 26-27 13-14
3.15 Electrical Power Motor – Generator
(Operation, Protection and Maintanance) 5800 3 24-26 1-3 16-18 19-21 5-7 8-10
3.16 Power Generation and Electrical Power Distribution 5800 3 7-9 5-7 13-15 29-31 25-27 6-8
3.17 PLC Programming Principle and Practice Simulations 4500 2 5-6 8-9 2-3 5-6 7-8 2-3
3.18 Diesel Electrical Set Operation and Maintenance 4500 2 9-10 5-6 6-7 2-3 4-5 5-6
3.19 Electrical Maintenance : Low and Medium Voltage Networks 4500 2 10-11 1-2 4-5 12-13 14-15 8-9 3.20 Electrical Power Distribution Networks and Controls 4500 2 1-2 12-13 15-16 9-10 12-13 19-20
3.21 Electrical Submersible Pumps 4500 2 19-20 15-16 17-18 19-20 28-29 15-16
3.22 Low Voltage Systems and Equipment (Operation And Maintenance) 4500 2 15-16 19-20 21-22 23-24 17-18 13-14 3. MACHINE & ELECTRICAL ENGINEERING
JUL AGT SEP OKT NOV DES
TRAINING BIAYA* JML
HARI
Page 6 of 14
Revisi 0 (2 November 2016)
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
3.23 Medium Voltage Systems and Equipment (Operation and Maintenance) 4500 2 3-4 9-10 2-3 6-7 5-7 1-3 3.24 High Voltage Systems and Equipment (Operation and Maintenance) 5800 3 8-10 5-7 6-8 2-4 10-12 5-7
3.25 Industrial Electrical Installations 5800 3 21-23 11-13 14-16 9-11 18-20 13-15
3.26 150 Kv Electrical Transmission Operation (Equipment and Maintenance) 5800 3 11-13 14-16 17-19 12-14 13-15 8-10 3.27 Power and Distribution Transformers (Operation and Maintenance) 5800 3 14-16 19-21 20-22 22-24 24-26 19-21 3.28 Power Transformer Diagnosis, Monitoring and Analysis 5800 3 24-26 1-3 3-5 18-20 26-28 21-23
3.29 Basic Power System Protections 4500 2 1-2 4-5 8-9 29-30 3-4 6-8
3.30 Low Voltage Electrical Power System Distribution 4500 2 19-20 7-8 9-10 27-28 19-20 29-30
3.31 Safety Instrument System & Control 5800 3 1-3 18-20 6-8 8-10 4-6 12-14
3.32 Electrostatic Ignition Of Fire and Explosion 4500 2 10-11 21-22 16-17 4-5 7-8 9-10
3.33 Keselamatan dan Kesehatan Kerja (K3) Listrik 4500 2 7-8 11-12 13-14 1-2 12-13 19-20
3.34 Electricity For Non Electrician 4500 2 5-6 23-24 23-24 25-26 12-13 14-15
3.35 Electrical Selection In Hazardous Area for Offshore Facilities 4500 2 16-17 25-26 15-16 10-11 17-18 6-7 3.36 High Voltage Equipment and Switchgear (Operation and Maintenance) 5800 3 3-5 29-31 16-18 5-7 27-29 14-16 3.37 Low Voltage Equipment and Switchgear (Operation and Maintenance) 4500 2 21-22 27-28 13-14 15-16 12-13 13-14
3.38 Low Voltage Distribution and Protection Systems 4500 2 17-18 2-3 3-4 12-13 14-15 22-23
3.39 Basic Geothermal System, Mechanical and Electrical Aspects 4500 2 23-24 5-6 7-8 24-25 19-20 20-21
3.40 Electrical Power System Analysis Using Etap 5800 3 10-12 7-9 17-19 19-21 26-28 28-30
3.41 Electrical Diesel Generator (Operation And Maintenance) 4500 2 2-3 12-13 14-15 29-30 5-6 5-6 3.42 Electric Power Transformer and Motor
(Operation, Maintenance and Trouble Shooting) 5800 3 7-9 19-21 20-22 9-11 3-5 6-8
3.43 Advance Instrument and Control 4500 2 4-5 16-17 17-18 11-12 6-7 2-3
3.44 Instrumentation and Control on Generators and Turbines 4500 2 15-16 27-28 8-9 9-10 24-25 14-15
3.45 Process Control & Loop Tunning 4500 2 25-26 8-9 30-31 26-27 13-14 15-16
3.46 Lightning Protection and Grounding Systems 5800 3 22-24 5-7 13-15 23-25 25-27 20-22
3.47 Manajemen Perawatan Bangunan Gedung Dan Fasilitas (Building
Maintenance) 5800 3 17-19 22-24 3-5 18-20 5-7 22-24
3.48 Electrical Instruments, Meters and Indicators 5800 3 15-17 26-28 6-8 2-4 4-6 13-15
3.49 Electric Motor ( Operation, Maintenance and Trouble Shooting) 4500 2 11-12 14-15 23-24 26-27 12-13 1-2
3.50 Electrical Safety and Power System Protection 5800 3 8-10 4-6 14-16 8-10 11-13 6-8
3.51 Power Electronics and Drives 4500 2 18-19 29-30 2-3 19-20 19-20 21-22
3.52 Electrical Distribution System Protection 4500 2 22-23 19-20 15-16 23-24 18-19 19-20
JAN FEB MAR APR MEI JUN JUL AGT SEP OKT NOV DES
NO TRAINING BIAYA* JML
Page 7 of 14
Revisi 0 (2 November 2016)
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
3.53 Electrical Powerline 5800 3 3-5 29-31 2-4 11-13 13-15 1-3
3.54 Protection on Generators, Transformers and Networks 4500 2 2-3 4-5 13-14 15-16 11-12 12-13
3.55 Variable Speed (Frequency) Drive (VSD/VFD), Theory & Applications 5800 3 4-6 14-16 17-19 25-27 12-14 7-9
3.56 Fundamental Process Control and Instrumentation 5800 3 22-24 11-13 7-9 23-25 10-12 19-21
3.57 Industrial Electrical Equipment, Installation, Preventive and Predictive
Maintenance 5800 3 18-20 7-9 3-5 19-21 6-8 15-17
3.58 Preventive and Predictive Maintenance of Electrical, Mechanical
Equipment 5800 3 14-16 19-21 20-22 1-3 25-27 6-8
3.59 Battery Charger Uninterruptible Power Supply (UPS) and Related
Component 5800 3 24-26 1-3 3-5 5-7 6-8 1-3
3.60 Medium Voltage Electrical Power Distribution System 5800 3 1-3 5-7 7-9 2-4 11-13 12-14
3.61 Audit Energi Listrik 4500 2 3-4 7-8 9-10 12-13 14-15 8-9
3.62 Basic Instrument & Control System 5800 3 8-10 11-13 13-15 9-11 18-20 20-22
3.63 Electrical Grounding & Lighting Protection 5800 3 17-19 22-24 17-19 18-20 13-15 14-16
3.64 Electrical Installation Disribution and Maintenance 5800 3 15-17 19-21 7-9 23-25 3-4 6-8
3.65 Medium and High Voltage Equiment and Switchgear Operation and
Maintenance 7000 4 24-27 14-17 2-5 18-21 26-29 14-17
3.66 Industrial Power System Analysis 7000 4 21-24 25-28 13-16 1-4 17-20 5-8
3.67 Instrumentation In Process Control 5800 3 11-13 29-31 17-19 19-21 5-7 21-23
3.68 Instrument, UPS and Ground Fault Analysis 7000 4 7-10 4-7 6-9 22-25 24-27 19-22
3.69 Low Voltage Switchgear Maintenance, Testing & Troubleshooting 5800 3 25-27 1-3 16-18 26-28 13-15 22-24 3.70 Operation & Maintenace Low Voltage Control Panel Cubicles 5800 3 15-17 19-21 6-8 8-10 4-6 12-14 3.71 Low Voltage Switchgear Maintenace & Control Protection 5800 3 18-20 7-9 3-5 4-6 13-15 1-3
3.72 Medium Voltage Cable, Splicing, and Terminations 5800 3 1-3 11-13 8-9 22-24 11-13 12-14
3.73 PLC System, Operation and Programming 7000 4 10-13 14-17 16-19 25-28 26-29 7-10
3.74 PLC System, Operation, Programming & Practice Simulation 5800 3 14-16 26-28 14-16 29-31 17-19 13-15
3.75 PLC Theory and Aplication Simulation 5800 3 3-5 1-3 2-4 11-13 5-7 21-23
3.76 Power System Analysis Under Fault Condition 4500 2 2-3 18-20 14-15 10-11 25-26 19-20
3.77 Industrial and Plant Relay Power Protection System 5800 3 11-13 14-16 16-18 19-21 12-14 28-30
3.78 Protection on Electrical Power System 4500 2 9-10 5-6 8-9 22-23 18-19 5-6
JAN FEB MAR APR MEI JUN JUL AGT SEP OKT NOV DES
NO TRAINING BIAYA* JML
Page 8 of 14
Revisi 0 (2 November 2016)
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
3.79 Protection on Electrical Power System Diesel Engines, Operation &
Maintenance 5800 3 17-19 21-23 2-4 12-14 26-28 8-10
3.80 Electrical Power Design And Analysis (Generators To Loads ) USING
ETAP 7000 4 21-24 25-28 13-16 1-4 17-20 5-8
3.81 Problem Analysis Of Electrical Power System 4500 2 18-19 29-30 2-3 19-20 19-20 21-22
3.82 Transformer Oil Analysis & Maintenance 7000 4 7-10 4-7 6-9 22-25 24-27 19-22
3.83 Transformers Condition Assessment 5800 3 3-5 22-24 17-19 26-28 5-7 15-17
3.84 Transformers Condition Monitoring 5800 3 21-23 26-28 13-15 9-11 3-5 12-14
Basic
4.1 Fundamental of Supply Chain Management & Logistic 4500 2 17-18 9-10 9-10 11-12 9-10 13-14 11-12 8-9 12-13 12-13 9-10 12-13
4.2 Supplier Market Analysis 4500 2 14-15 12-13 6-7 15-16 26-27 6-7
4.3 Basic of Logistics Practices 4500 2 24-25 7-8 18-19 18-19 28-29 14-15
4.4 Basic of Inventory Management & Warehouse Management 4500 2 9-10 19-20 15-16 22-23 3-4 13-14
4.5 Basic of Procurement Management 4500 2 25-26 21-22 23-24 25-26 26-27 16-17
4.6 Basic of Purchasing Management 4500 2 7-8 26-27 13-14 24-25 5-6 20-21
4.7 Basic of Transportation and Distribution 4500 2 11-12 2-3 16-17 20-21 19-20 21-22
Medium
4.8 Green Logistics 4500 2 18-19 29-30 17-18 5-6 13-14 29-30
4.9 Reverse Logistics 4500 2 15-16 12-13 8-9 2-3 11-12 21-22
4.10 Safety In Logistics 4500 2 25-26 8-9 23-24 12-13 27-28 2-3
4.11 Effective Inventory Reduction 4500 2 22-23 19-20 13-14 9-10 18-19 12-13
4.12 KPI Design for Warehouse 4500 2 5-6 15-16 9-10 19-20 14-15 8-9
4.13 Owner Estimate Technique 4500 2 9-10 5-6 6-7 3-4 4-5 5-6
4.14 E-Procurement 4500 2 10-11 1-2 4-5 12-13 12-13 1-2
4.15 Negotiation Skills 4500 2 1-2 11-12 15-16 10-11 12-13 19-20
4.16 Fleet Management 4500 2 19-20 15-16 17-18 19-20 28-29 15-16
4.17 Driver Management 4500 2 15-16 20-21 21-22 23-24 17-18 13-14
Advanced
4.18 Managing People in SCM & Logistic 4500 2 19-20 16-17 18-19 18-19 19-20 14-15
4.19 Change Management in SCM 4500 2 16-17 18-19 15-16 15-16 17-18 21-22
4.20 Communication Skills in Logistics 4500 2 3-4 23-24 30-31 27-28 5-6 23-24
4. SUPPLY CHAIN
AGT SEP OKT NOV MAR APR MEI JUN JUL
NO TRAINING BIAYA* JML
Page 9 of 14
Revisi 0 (2 November 2016)
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
4.21 Vendor Management Inventory 4500 2 21-22 27-28 6-7 24-25 24-25 20-21
4.22 Modern Warehouse Design 4500 2 12-13 30-31 16-17 20-21 12-13 28-29
4.23 RFID in Warehouse 4500 2 2-3 4-5 13-14 15-16 11-12 12-13
4.24 Vendor Selection 4500 2 12-13 7-8 16-17 6-7 13-14 16-17
4.25 Vendor Relationship Management 4500 2 17-18 9-10 23-24 13-14 19-20 21-22
4.26 Dispatch Management System 4500 2 21-22 27-28 20-21 24-25 17-18 21-22
4.27 Vehicle Routing Problem 4500 2 3-4 1-2 9-10 25-26 26-27 15-16
4.28 Production Planning and Inventory Control (PPIC) 4500 2 1-2 6-7 6-7 29-30 5-6 13-14
4.29 Production Planning and Scheduling (product by order) 4500 2 26-27 7-8 4-5 4-5 7-8 1-2
4.30 Vendor Analysis and Selection 4500 2 9-10 11-12 8-9 1-2 10-11 6-7
4.31 Principles of Land Transportation 4500 2 5-6 9-10 23-24 13-14 12-13 9-10
4.32 Competitor Market Analysis 4500 2 14-15 20-21 20-21 10-11 19-20 12-13
4.33 Decision Making with Analytical Hierarchy Process (AHP) 4500 2 10-11 14-15 2-3 6-7 28-29 16-17
4.34 Spare Part Management 4500 2 23-24 25-26 7-8 3-4 24-25 7-8
4.35 Material Management 4500 2 12-13 7-8 16-17 11-12 13-14 7-8
4.36 IMPLEMENTASI ISO 28001:2007
Sistem Manajemen Keamanan untuk Rantai Pasokan 4500 2 24-25 9-10 23-24 13-14 19-20 23-24
4.37 Continous Improvement Supply Chain dengan Simulasi Promodel 4500 2 21-22 27-28 20-21 24-25 17-18 21-22
4.38 Integrated Logistic Management 4500 2 19-20 23-24 30-31 18-19 27-28 28-29
4.39 Manajemen Transportasi 4500 2 22-23 19-20 15-16 22-23 19-20 19-20
5.1 Implementasi OHSAS 18001:2007 4000 2 10-11 1-2 2-3 4-5 2-3 6-7 4-5 1-2 5-6 3-4 1-2 5-6
5.2 Dokumentasi OHSAS 18001:2007 4000 2 12-13 7-8 7-8 6-7 4-5 8-9 6-7 3-4 7-8 5-6 7-8 7-8
5.3 Audit Internal OHSAS 18001:2007 4000 2 17-18 9-10 9-10 11-12 9-10 13-14 11-12 8-9 12-13 12-13 9-10 12-13
5.4 Implementasi ISO 14001:2015 4000 2 5-6 2-3 2-3 12-13 2-3 8-9 11-12 10-11 7-8 10-11 7-8 12-13
5.5 Dokumentasi ISO 14001:2015 4000 2 10-11 7-8 7-8 18-19 4-5 13-14 13-14 15-16 12-13 12-13 15-16 14-15 5.6 Internal Audit ISO 14001:2015 4000 2 19-20 16-17 14-15 25-26 16-17 15-16 20-21 22-23 14-15 17-18 23-24 19-20
5.7 Pengendalian Bahan Beracun Berbahaya (B3) 4500 2 9-10 20-21 21-22 24-25 25-26 7-8
5.8 Transportasi Bahan Beracun Berbahaya (B3) 4500 2 10-11 22-23 4-5 26-27 19-20 15-16
5.9 Globally Harmonized System (GHS)
Sistem Klasifikasi dan Pelabelan Bahan Kimia B3 5000 2 19-20 29-30 16-17 11-12 28-29 22-23
5.10 Teknik Penyusunan AMDAL 4500 2 14-15 4-5 6-7 30-31 5-6 19-20
5. HEALTH, SAFETY & ENVIRONMENT
JAN FEB MAR APR MEI JUN JUL AGT SEP OKT NOV DES
NO TRAINING BIAYA* JML
Revisi 0 (2 November 2016)
Page 10 of 14
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
5.11 Waste Water Treatment 4500 2 25-26 23-24 30-31 18-19 26-27 28-29
5.12 Teknik Instalasi Pengolahan Air Limbah (IPAL) 4500 2 21-22 18-19 7-8 1-2 24-25 20-21
5.13 Industrial Disaster & Emergency Response 4500 2 16-17 20-21 14-15 10-11 24-25 13-14
5.14 Safety Risk Management 4500 2 24-25 1-2 16-17 19-20 6-7 8-9
5.15 Teknik Penyusunan dan Pemahaman MSDS 4500 2 7-8 6-7 13-14 29-30 26-27 6-7
5.16 Audit dan Manajemen Energi di Industri (Based on ISO 50001:2011) 4500 2 5-6 8-9 2-3 5-6 7-8 2-3
5.17 Green Building and Factory 4500 2 2-3 4-5 8-9 15-16 11-12 12-13
5.18 Green Procurement/RoHS System Guidelines 4500 2 12-13 7-8 16-17 6-7 13-14 16-17
5.19 Implementasi Standar Manajemen Resiko ISO 31000:2009 4000 2 17-18 9-10 23-24 13-14 19-20 21-22 5.20 Implementasi Sistem Manajemen Keselamatan dan Kesehatan Kerja
(SMK3 - PP No 50 Tahun 2012) 4000 2 15-16 25-26 13-14 30-31 10-11 19-20
5.21 Implementasi ISO 14064:2006 (Perhitungan dan Penurunan
Emisi Gas Rumah Kaca) 4500 2 7-8 20-21 7-8 2-3 12-13 21-22
5.22 Risk Assessment (Analisa Resiko) & JSA (Job Safety Analysis) 4500 2 16-17 27-28 20-21 8-9 18-19 6-7
5.23 Risk Assessment (Analisa Resiko) Kimia 4500 2 12-13 29-30 16-17 20-21 14-15 28-29
5.24 Surat Izin Bekerja (working Permit) 4500 2 17-18 1-2 9-10 25-26 26-27
5.25 Incident Investigation 4500 2 14-15 11-12 7-8 2-3 19-20 5-6
5.26 Behaviour Safety 4500 2 23-24 18-19 14-15 10-11 3-4 13-14
5.27 Penanggulangan Tumpahan 4500 2 24-25 16-17 3-4 13-14 19-20 16-17
5.28 Teknik Penanganan Kondisi Tanggap darurat 4500 2 16-17 6-7 7-8 15-16 11-12 7-8
5.29 Process Safety Management (Awareness) 4500 2 26-27 7-8 30-31 4-5 14-15 21-22
5.30 Hazard Identification and Risk Assessment (HIRA) 4500 2 3-4 9-10 2-3 6-7 7-8 2-3
5.31 Hazard Operational (HAZOP) 4500 2 9-10 5-6 6-7 2-3 4-5 5-6
5.32 Process Hazard Analysis (PHA) Awareness 4500 2 10-11 1-2 4-5 12-13 14-15 8-9
5.33 Process Hazard Analysis Leader 4500 2 2-3 12-13 14-15 29-30 5-6 5-6
5.34 Hazard Communication 4500 2 7-8 19-20 20-21 9-10 3-4 6-7
5.35 Monitoring Lingkungan 4500 2 10-11 22-23 4-5 26-27 19-20 15-16
5.36 Pembuatan Laporan Lingkungan 4500 2 19-20 29-30 16-17 11-12 28-29 22-23
5.37 Persiapan Audit Lingkungan (PROPER) 4500 2 15-16 25-26 13-14 30-31 24-25 19-20
5.38 Pengelolaan Limbah Biologis 4500 2 7-8 20-21 7-8 2-3 17-18 21-22
5.39 Pengelolaan Limbah Cair 4500 2 10-11 2-3 2-3 11-12 12-13 7-8
5.40 Pengelolaan Limbah Padat 4500 2 5-6 7-8 4-5 13-14 7-8 14-15
AGT SEP OKT NOV DES
NO TRAINING JML
HARI JAN FEB MAR APR MEI JUN JUL BIAYA*
Revisi 0 (2 November 2016)
Page 11 of 14
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
5.41 Pengelolaan Limbah Industri 4500 2 1-2 6-7 8-9 3-4 19-20 7-8
5.42 Ergonomic In Workplace 4500 2 16-17 25-26 15-16 29-30 26-27 19-20
6.1 Activity Based Costing 4000 2 15-16 26-27 6-7 30-31 25-26 6-7
6.2 Asset Management 4000 2 11-12 8-9 23-24 5-6 28-29 28-29
6.3 Financial Planning & Decision Making 4000 2 22-23 6-7 14-15 15-16 5-6 12-13
6.4 Financial Statement Analysis 4000 2 25-26 15-16 3-4 19-20 7-8 2-3
6.5 Finance for Non Finance 4000 2 7-8 20-21 8-9 10-11 10-11 21-22
6.6 Basic Accounting 4000 2 4-5 1-2 16-17 26-27 19-20 15-16
6.7 Budgeting and Project Cost Control 4000 2 21-22 4-5 13-14 9-10 4-5 20-21
6.8 Teknik Penyusunan Laporan Keuangan 4000 2 17-18 21-22 18-19 12-13 7-8 8-9
6.9 Cash Management 4000 2 16-17 27-28 20-21 8-9 18-19 6-7
6.10 Petty Cash Management & Administration 4000 2 24-25 9-10 4-5 4-5 14-15 15-16
6.11 Export Import 4000 2 22-23 4-5 14-15 15-16 5-6 12-13
6.12 Advanced Budgeting and Cost Control 4000 2 14-15 18-19 20-21 10-11 3-4 14-15
6.13 Effective Cashflow Management 4000 2 17-18 2-3 9-10 25-26 26-27 22-23
7.1 Customer Satisfaction Survey (Methodology & Statistic) 4800 2 14-15 27-28 13-14 3-4 11-12 14-15
7.2 Brand Equity Survey (Methodology & Statistic) 4800 2 12-13 7-8 4-5 11-12 14-15 1-2
7.3 Marketing Research with SPSS 4800 2 7-8 20-21 15-16 29-30 19-20 19-20
7.4 Marketing Research with MS Excel 4800 2 16-17 25-26 20-21 8-9 3-4 7-8
7.5 Basic Statistical Analysis For Marketing Research Using R 4800 2 24-25 14-15 23-24 27-28 28-29 21-22 7.6 Advance Statistical Analysis For Marketing Research Using R 4800 2 9-10 18-19 8-9 15-16 26-27 20-21
7.7 Data Mining 4800 2 3-4 23-24 30-31 6-7 5-6 29-30
8.1 Effective Customer Relationship Management (CRM) 4000 2 1-2 4-5 6-7 1-2 3-4 5-6
8.2 HR Management Based Competency 4000 2 7-8 6-7 8-9 3-4 5-6 7-8
8.3 Strategic HRM and The HR Scorecard 4000 2 17-18 9-10 9-10 13-14 12-13 9-10
8.4 HR for Non HR 4000 2 8-9 20-21 15-16 8-9 4-5 7-8
8.5 Work Load Analysis 4000 2 14-15 12-13 13-14 10-11 17-18 21-22
8.6 Job Analysis 4000 2 24-25 21-22 23-24 20-21 19-20 23-24
8.7 Performance Management and Appraisal 4000 2 15-16 11-12 8-9 2-3 11-12 19-20
8.8 Strategic Performance Management 4000 2 25-26 8-9 18-19 12-13 27-28 2-3
NOV DES
7. MARKETING 6. FINANCE
JUN JUL AGT SEP OKT JAN FEB MAR APR MEI
8. HRD
NO TRAINING BIAYA* JML
Revisi 0 (2 November 2016)
Page 12 of 14
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
8.9 Handling Customer Complaint 4000 2 22-23 19-20 13-14 9-10 18-19 12-13
8.10 Human Capital Management 4000 2 5-6 15-16 9-10 19-20 14-15 1-2
8.11 Corporate Social Responsibility (CSR) 4000 2 9-10 5-6 6-7 2-3 4-5 5-6
8.12 Competency - Based Human Capital Management 4000 2 10-11 1-2 4-5 12-13 19-20 7-8
8.13 Design & Evaluation of Training Program 4000 2 1-2 12-13 15-16 15-16 12-13 19-20
8.14 Competency Assessment 4000 2 19-20 14-15 17-18 25-26 28-29 15-16
8.15 Competency Based Recruitment & Selection 4000 2 2-3 5-6 13-14 10-11 5-6 5-6
8.16 Competency Based Pay 4000 2 24-25 2-3 16-17 20-21 5-6 9-10
8.17 Human Capital Return on Investment 4000 2 7-8 11-12 20-21 29-30 24-25 7-8
8.18 HR Metrics: Driving HR Success 4000 2 3-4 8-9 2-3 5-6 7-8 2-3
8.19 Program Persiapan Pensiun 4000 2 9-10 4-5 6-7 2-3 3-4 12-13
8.20 Training of Trainer 4000 2 10-11 1-2 4-5 12-13 14-15 8-9
8.21 Training Need Analysis 4000 2 1-2 11-12 15-16 10-11 10-11 19-20
8.22 Teknik Survey Kepuasan Karyawan 4000 2 17-18 21-22 17-18 19-20 28-29 15-16
8.23 Statistical Performance Control for Employee 4000 2 15-16 19-20 21-22 23-24 17-18 14-15
8.24 IMPLEMENTASI ISO 260001:2010 Guidance on Social Responsibility 4000 2 12-13 7-8 4-5 6-7 7-8 7-8
8.25 Outsourcing Management 4000 2 17-18 9-10 9-10 11-12 12-13 9-10
8.26 Hukum Ketenagakerjaan 4000 2 16-17 20-21 15-16 10-11 26-27 21-22
8.27 How to Develop and Implementing Winning KPI 4000 2 26-27 1-2 16-17 19-20 6-7 8-9
9.1 Pengenalan Proses Preparasi Analisis Bahan Galian Industri dan Bahan
Galian Logam 5500 3 1-3 25-27 20-22 1-3 3-5 5-7
9.2 Model Pengambilan Sampel dan Metoda Perhitungan Cadangan Bijih
Nikel 5500 3 18-20 7-9 17-19 25-27 26-28 14-16
9.3 Teknik Sampling Batubara 5000 2 24-25 2-3 16-17 19-20 5-6 8-9
9.4 Teknik Preparasi, Pengujian dan Analisis Batubara 5000 2 7-8 5-6 13-14 29-30 25-26 6-7
9.5 Coal Handling 5000 2 5-6 8-9 2-3 18-19 7-8 2-3
9.6 Coal Preparation Plant & Stockpile Management 5000 2 9-10 4-5 6-7 2-3 4-5 5-6
9.7 Energi Batubara dan Pemanfaatannya 5000 2 12-13 1-2 4-5 12-13 11-12 7-8
9.8 Teknologi Batubara Bersih 5000 2 1-2 12-13 15-16 8-9 12-13 19-20
JAN SEP OKT
9. MINING, OIL & GAS
NOV DES FEB MAR APR MEI JUN JUL AGT
BIAYA* JML HARI
TRAINING NO
Revisi 0 (2 November 2016)
Page 13 of 14
JADWAL PUBLIC
TRAINING
2017
www.spinsinergi.co.id
9.9 Teknologi Pengolahan dan Pemanfaatan Batubara 5000 2 19-20 15-16 17-18 19-20 28-29 15-16
9.10 Teknologi Upgrading Batubara 5000 2 15-16 19-20 21-22 23-24 17-18 13-14
9.11 Teknologi Gasifikasi Batubara dan Penerapannya 5000 2 10-11 1-2 2-3 4-5 2-3 6-7 4-5 1-2 5-6 3-4 1-2 5-6 9.12 Teknologi Pemanfaatan Batubara untuk PLTU 5000 2 12-13 7-8 7-8 6-7 4-5 8-9 6-7 3-4 7-8 5-6 7-8 7-8
10.1 Implementasi ISO 22000:2005 4500 2 10-11 1-2 2-3 4-5 2-3 6-7 4-5 1-2 5-6 3-4 1-2 5-6
10.2 Dokumentasi ISO 22000:2005 4500 2 12-13 7-8 7-8 6-7 4-5 8-9 6-7 3-4 7-8 5-6 7-8 7-8
10.3 Internal Audit ISO 22000:2005 4500 2 17-18 9-10 9-10 11-12 9-10 13-14 11-12 8-9 12-13 12-13 9-10 12-13 10.4 Good Manufacturing Practice: Cara Pengolahan Pangan yang Baik 4500 2 21-22 26-27 20-21 10-11 25-26 7-8
10.5 Implementasi HACCP 4500 2 10-11 22-23 4-5 26-27 19-20 15-16
10.6 Penyusunan Dokumen Sistem Mutu Pangan Organik 4500 2 19-20 29-30 16-17 13-14 28-29 22-23 10.7 Food Safety Program ( Inspection, Sampling, Pest Management) 4500 2 5-6 23-24 23-24 25-26 12-13 14-15 10.8 Food Safety (HACCP) For Hotel, Restaurant & Catering 4500 2 9-10 11-12 8-9 22-23 10-11 6-7
10.9 Food Safety System Certification 4500 2 3-4 9-10 30-31 20-21 14-15 9-10
10.10 GAP & GHP (Good Agriculture Practice & Good Handling Practice ) 4500 2 14-15 20-21 20-21 24-25 19-20 12-13
10.11 Internal Audit FSSC 22000 4500 2 10-11 14-15 2-3 6-7 26-27 16-17
10.12 Mikrobiologi Dasar 4500 2 1-2 18-19 15-16 1-2 11-12 7-8
10.13 Mikrobiologi Industri 4500 2 26-27 21-22 18-19 18-19 19-20 14-15
10.14 Mikrobiologi Rumah Sakit 4500 2 8-9 5-6 7-8 9-10 4-5 13-14
10.15 Ketidakpastian Uji Mikrobiologi 4500 2 24-25 30-31 17-18 27-28 12-13 23-24
10.16 Pengawasan Mutu Pangan 4500 2 15-16 25-26 6-7 30-31 25-26 6-7
10.17 Pengelolaan Laboratorium Mikrobiologi 4500 2 11-12 8-9 23-24 5-6 28-29 28-29
10.18 Sampling dan Penanganan Sampel untuk Uji Mikrobiologi 4500 2 22-23 6-7 14-15 15-16 5-6 12-13
10.19 Validasi Metode Analisis Mikrobiologi 4500 2 25-26 15-16 3-4 19-20 7-8 2-3
10.20 Built in Quality 4500 2 7-8 25-26 8-9 10-11 12-13 21-22
10.21 Good Laboratory practice & SMK3 4500 2 4-5 1-2 16-17 26-27 12-13 15-16
10.22 I2C (Inovation & Improvement Culture) 4500 2 9-10 20-21 13-14 29-30 25-26 6-7
10.23 Sistem Jaminan Halal 4500 2 5-6 7-8 4-5 5-6 5-6 2-3
10. FOOD & AGRICULTURE
NOV DES
TRAINING
NO BIAYA* JML
