DAFTAR PUSTAKA
1. McCabe JF, Walls AWG. Applied dental materials. 9th ed. London: Blackwell
Munksgaard, 2008: 110-23.
2. Combe EC, Grant AA. Notes on dental materials. 5th ed. New York: Churchill Livingstone, 1986: 255-7.
3. Shah J, Bulbule N, Kulkarni S, Shah R, Kakade D. Comparative evaluation of
sorption, solubility and microhardness of heat cure polymethylmethacrylate
denture base resin & flexible (thermoplastic polyamide nylon) denture base
resin. J of Clinical and Diagnostic Research 2014; 8(8): 9-12.
4. Craig RG, Powers JM. Restorative dental materials. 11th ed. USA: Mobsy,
2002: 636.
5. Alla RK, Sajjan S, Alluri VR, Ginjupalli K,Upadhya N. Influence of fiber
reinforcement on the properties of denture base resins. JBNB 2013; 4: 91-7.
6. Noort R. Introduction to dental materials. 3rd ed. London: Elsevier, 2007: 216-216-7.
7. Manappallil JJ. Basic dental materials. 2nd ed. New Delhi: Jaypee Brothers Medical Publishers (P), 2003: 99-101.
8. Taqwim A. Aplikasi valpast pada gigitiruan sebagian lepasan. 20 juni
2011.
9. Yunus N, Rashid AA, Azmi LL,Abu-Hassan MI. Some flexural properties of
a nylon denture base polymer. J of Oral rehabilitation 2005; 32: 65-71.
10. Soygun K, Bolayir G, Boztug A. Mechanical and thermal properties of
polyamide versus reinforced PMMA denture base materials. J Adv
Prosthodont 2013; 5: 153-60.
12. Sepulveda-Navarro WF, Arana-Correa BE, Borges CPF, Jorge JHJ, Urban
VM, Campanha NH. Color stability of resins and nylon as denture base
material in beverages. J of Prosthodontics 2011; 20: 632-8.
13. Price CA. The effect of composition of denture base polymers on impact
resistance. Thesis. Sydney: University of Sydney, 1986: 17-9.
14. Thakral GK, Aeran H. Yadav B, Thakral R. Flexible partial dentures – A
hope for the challenged mouth. People’s J of Scientific Research 2012; 5(2):
55-9.
15. Takabayashi Y. Characteristics of denture thermoplastic resins for non-metal
clasp dentures. Dent Material J 2010; 29(4): 353-61.
16. Saied HM. Influence of dental cleansers on the color stability and surfaces
roughness of three types of denture bases. J Bagh College Dentistry 2011;
23(3): 17-22.
17. Abuzar MA, Bellur S, Duong N, Kim BB, Lu P, Palfreyman N, dkk.
Evaluating surface roughness of a polyamide denture base material in
comparison with poly(methyl methacrylate). J of Oral Science 2010; 52(4):
577-81.
18. Negrutiu M, Sinescu C, Romanu M, Pop D, Lakatos S. Thermoplastic resins
for flexible framework removable partial dentures. TMJ 2005; 55(3): 295-9.
19. Zortuk M, Kilic K, Uzun G, Ozturk A, Kesim B. The effect of different fiber
concentrations on the surface roughness of provisional crown and fixed
partial denture resin. Eur J Dent 2008; 2: 185-90.
20. Hilgenberg SP, Orellana-Jimenez EE, Sepulveda-Navarro WF, Arana-Correa
BE, Alves DCT, Campanha NH. Evaluation of surface physical properties of
acrylic resins for provisional prosthesis. Mat Res 2008; 11(3).
21. Lee SI, Lim YJ, Yun SD. Strength of glass fiber reinforced PMMA resin and
surface roughness change after abrasion test. J Korean Acad Prosthodont
22. Attar N. The effect of finishing and polishing procedures on the surface
roughness of composite resin materials. The J of contemporary dental pratice
2007; 8(1) : 1-11.
23. Rahal JS, Mesquita MF, Henriques GEP, Nobilo MAA. Influence of chemical
and mechanical polishing on water sorption and solubility of denture base
acrylic resins. Braz Dent J 2004; 15(3): 225-30.
24. Pero AC, Marra J, Paleari AG, de Souza RF, Ruvolo-Filho A, Compagnoni
MA. Reability of a method for evaluating porosity in denture base resins. Gerodontology 2011; 28:127-33.
25. Tuna SH, Keyf F, Gumus HA, Uzun C. The evaluation of water
sorption/solubility on various acrylic resins. European J of Dentistry 2008; 2:
191-7.
26. Monaco C. Dental materials and clinical applications. Thesis. Italy:
university of Siena, 2005: 13-25.
27. Gürbüz Ö. Ünalan F, Kursoglu P. Water sorption of denture teeth acrylic
resin reinforced with milled glass fiber. OHDMBCS 2005; 4(4): 57-62.
28. Loncar A, Vojvodic D, Jerolimov V, Komar D, Zabarovic D. Fibre reinforced
polymers part II: Effect on mechanical properties. Acta Stomatol Croat 2008;
42(1): 49-63.
29. Nakamura M, Takahashi H, Hayakawa I. Reinforcement of denture base resin
with short-rod glass fiber. Dent Materials J 2007; 26(5): 733-8.
30. Sitorus Z, Dahar E. Perbaikan sifat fisis dan mekanis resin akrilik
polimerisasi panas dengan penambahan serat kaca. Dentika dent J 2012;
17(1): 24-9.
31. Tandon R, Gupta S, Agarwal SK. Denture base materials : from past to
future. Indian J od Dental Science 2010; 2(2): 33-9.
32. Loncar A, Vojvodic D, Komar D. Fiber-reinforced polymers part I: basics ad
33. Raszewski Z, Nowakowska D. Mechanical properties of hot curing acrylic
resin after reinforced with different kinds of fibers. Int J of Biomedical
Materials Research 2013; 1(1): 9-13.
34. Fonseca RB, Favarao IN, Kasuya AVB, Abrao M, da Luz NFM, Naves LZ.
Influence of glass fiber wt% and silanization on mechanical flexural strength
of reinforced acrylics. J of Materials Science and Chemical Engineering 2014;
2: 11-5.
35. Maheswari U, Geetha PK, Nagaraj KR, Shwetha K. Comparative analysis of
the flexural strength of conventional polymethyl Methacrylate resin, high
impact resin and glass fiber reinforced resin – An invitro study. Indian J of
Dent Sciences 2013; 4(5): 77-9.
36. Lee SI, Kim CH, Kim YS. Effects of chopped glass fiber on the strength of
heat-cured pmma resin. J Korean Acad Prosthodont 2001; 39(6): 589-98.
37. Ariyani, Tamin H, Indra M. Pengaruh penambahan fiber glass reinforced
terhadap penyerapan air dan stabilitas warna bahan basis gigitiruan nilon
termoplastik. Dentika dent J 2013; 17(3): 239-45.
38. Gunadi A. Ilmu Geligi Tiruan Sebagian Lepasan. Jakarta: Hipokrates, 2012:
215-220.
39. Carr AB, Browan DT. McCracken’s Removable Partial Prosthodontics.12th
ed. Canada: Elsevier, 2011: 103-8.
40. Zarb, Bolender. Prosthodontic Treatment for Edentulous Patients. 13th.
Elsevier: Singapore, 2012: 190-5.
41. Anusavice KJ. Phillip’s Science of dental materials. 11th ed. Florida: Elsevier, 2003: 143-5.
42. O’Brien WJ. Dental material ans their selection. 3rd ed. Michigan:
Quintessence Publishing Co, Inc, 2002:141-3.
43. Gladwin M, Bagby M. Clinical aspects of dental materials. 3rd ed.
Lippincott williams& wilkins: China, 2009: 153-62.
44. Anonymous. Nylon – wikipedia, the free
45. Kortrakulkij K. Effect of denture cleanser on color stability and flexural
strength of denture base material. Thesis. Mahidol, Thailand: Mahidol
University, 2008: 4-18.
46. Trisna. Perbedaan kekasaran permukaan bahan basis gigitiruan nilon dengan
resin akrilik polimerisasi panas. Skripsi. Medan: Universitas Sumatera Utara,
2010.
47. Borntreger Information Technology Services. Picasso dental studios:
removable appliances.
september 2014)
48. Anusavice KJ. Phillips buku ajar ilmu bahan kedokteran gigi. 10th ed. Alih Bahasa. Budiman. EGC: Jakarta, 1996: 176-9, 213-8.
49. Chihargo. Perbedaan kekasaran permukaan bahan basis gigitiruan nilon dan
resin akrilik polimerisasi panas dengan teknik pemolesan mekanis dan kemis.
Skripsi. Medan: Universitas Sumatera Utara, 2011.
50. Chandra J. Perbedaan penyerapan air pada bahan basis gigitiruan resin
akrilik polimerisasi panas dengan termoplastik nilon. Skripsi. Medan:
Universitas Sumatera Utara, 2011.
51. Anonymous. Roughness – wikipedia, the free
encyclopedia
52. Latief A. Sorption and solubility of a denture base acrylic. Thesis: Cape
Peninsula University of Technology, 2012: 6-7.
53. Hyer MW. Stress Analysis of Fiber-Reinforced Composite Materials.
Singapore: McGraw-Hill, 1998: 9-32.
54. Obukuro M, Takahashi Y, Shimizu H. Effect of diameter glass fibers on
flexural properties of fiber-reinforced composites. DMJ 2008; 27(4): 541-8.
55. Vojvodic D, Komar D, Schauperl Z, Celebic A, Mehulic K, Zabarovic D.
Influence of different glass fiber reinforcement on denture base polymer
strength (fiber reinforcement of dental polymer). Med Glas 2009;
56. Kanie T, Fujii K, Arikawa H, Inoue K. Flexural properties and impact
strength of denture base polymer reinforced with woven glass fiber. Dental
Materials 2000; 16:150-8.
57. McCabe JF, Rusby S. Water absorption, dimensional change and radial
pressure in resin matrix dental restorative materials. Elsevier 2004; 25:
4001-7.
58. Hanafiah KA. Rancangan percobaan: teori dan aplikasi. 3rd ed. Jakarta:
Rajagrafindo Perkasa 2011: 9.
59. Notoatmodjo S. Metodologi penelitian kesehatan. Jakarta: Rineka Cipta,
2010: 50.
60. Wieckiewicz M, Opitz V, Richter G, Boening KW. Physical properties of
polyamide-12 versus PMMA denture base material. BioMed Research
International, 2014: 1-7.
61. Polat TN, Karacaer O, Tezvergil A, Lassila LVJ, Vallittu PK. Water sorption,
solubility and dimensional changes of danture base polymers reinforced with
short glass fibers. J Biomaterials Applications 2003; 17: 321-35.
62. Vallittu PK, Narva KK, Miettien VM. Water sorption and effect of
post-curing of glass fiber reinforced polymers. J Biomaterial 1999; 20: 1187-94.
63. Paladugu LS, Sivakumar M, Ganta R. Evaluation of flexural strength, impact
strength and water sorption of various denture base resins – an in vitro study.