DAFTAR PUSTAKA
1. Kohli S, Bhatia S. Polyamides in dentistry. Int J of Scientific Study 2013;
1(1): 20-5.
2. Nengrutiu M, Sinescu C, Romanu M, dkk. Thermoplastic resins for flexible
framework removable partial denture. TMJ 2005; 55 (3): 296-7.
3. Jang DE, Lee Jy, Jang HS, Son Mk. Color stability, water sorption and
cytotoxicity of thermoplastic acrylic resin for non metal clasp denture. J Adv
Prosthodont 2015; 7: 278-87.
4. Vojdani M,Giti R. Polyamide as a denture base material: A Literature Review.
J Dent Shiraz Univ Med Sci 2015; 16 (l): 1-9.
5. Sharma A, Shashidhara HS. A review: flexible removable partial dentures. J
of Dental and Medical Sciences 2014; 13(12): 58-62.
6. Singh JP, Dhiman RK, Bedi RPS, dkk. Flexible denture base material : a
viable alternative to conventional acrylic denture base material. Contemporary
Clinical Dentistry 2011: 2(4); 313-4.
7. Herman F Mark. Encyclopedia of polymer science and technology. John
Wiley & Sons Inc 2014: 307-28.
8. Anusavice KJ. Phillip’s Buku Ajar Ilmu Bahan Kedokteran Gigi. 10th ed. Alih
Bahasa. Budiman. EGC: Jakarta, 1996: 197, 204-5,214.
9. Jawad RM. Evaluation of the effect of hypochlorite cleanser on water sorption
and solubility of flexible and conventional hot – cure – acrylic denture base (a
comparative study) 2014. 11(1); 35, 37-8.
10. Ebewele RO. Polymer science and technology. CRP Press LLC: Florida,
2000: 435-8.
11. Utami M, Febrida R, Djustiana N. The comparison of surface hardness
between thermoplastic nylon resin and heat-cured acrylic resin. Padjajaran J
of Dentistry 2009; 21(3): 200-3.
12. Latief Abduraghman. Sorption and solubility of denture base acrylic.Thesis
Technology: Dental Technology in the Faculty of Health and Wellness
Sciences at the Cape Peninsula University of Technology 2012: 6-7.
13. Singh K, Gupta N. Injection moulding technique for fabrication of flexible
prosthesis from flexible thermoplastic denture base materials. World J Dent
2012; 3(4): 303-307.
14. Chhnoeum T. Effect of denture cleanser on the surface roughness and
hardness of denture base materials. Thesis submitted in fulfilment of the
requirements for the degree of Master of Science (Prosthodontics) Mahidol
University 2008: 12-15.
15. Elshereksi N W. Mechanical and environmental properties of denture base
poly methyl methacrylate filled by barium titanate. Thesis submitted in
fulfilment of the requirements for the degree of Master of Science 2006: 3, 24.
16. T. Fattahi Meyabadi, M.R. Mohaddes Mojtahedi, S.A Mousavi Shoushtari.
Melt spinning of reused nylon 6: structure and physical properties of as-spun,
drawn, and textured filaments. The J of The Textile Institute 2010; 101(6):
527-537.
17. Soja J, Miskolczi N. Degradation of reinforced and unreinforced waste
polyamides during mechanical recycling. Hungarian J of Industry and
Chemistry Veszreem 2013; 41(2) : 131-6.
18. Goitisolo I, Jose´ I, Eguiaza´ bal, Jon Naza´ bal. Effects of reprocessing on the
structure and properties of polyamide 6 nanocomposites.. Journal Elseiver
2008 :1752.
19. Su KH, Lin JH, Lin CC. Influence of reprocessing on the mechanical
properties and structure of polyamide 6. J of Materials Processing Technology
2007. 192-193: 532-538.
20. Ratta, V. Stancik, E.J. Ayambem, A. Parvatareddy, H., McGrath, J.E. and
Wilkes,G.L. Submitted to polymer.
21. Harper CA. Handbook of plastics, elastomers, and composites. 4th ed. The
22. Hamad K, Kaseem M, Deri F. Recycling of waste from polymer materials: An
overview of the recent works. Journal Elseiver 2013: 2801,2810.
23. Noort RV. Dental Materials. 3th ed. Elseiver: Philadelphia, 2007: 37-40.
24. Peydró MA, Juárez D, Selles MA, dkk. Study of mechanical behavior of
reprocessing polyamide. Fascicle of Management and Technological
Engineering 2011; 10(20): 1-4.
25. Page IB. Polyamides as Engineering Thermoplastic Materials. Rapra Review
Reports 2000; 11(1): 25.
26. Takabayashi Y. Characteristics of denture thermoplastic resins for non-metal
clasp dentures. Dent Material J 2010; 29(4): 353.
27. Ardelean L, Bortun C, Podaraju A, dkk. Manufacture of different types of
thermoplastic. University of Medicine and Pharmacy Timisoara Romania:
1-2.
28. Ariyani, Tamin H, Indra M. Pengaruh penambahan fiber glass reinforced
terhadap penyerapan air dan stabilitas warna bahan basis gigitiruan nilon
termoplastik. Dentika dent J 2013; 17(3): 239-45.
29. Thakral GK, Himanshu A, Bhupinder Y, dkk. Flexible partial dentures - a
hope for the Challenged Mouth. People’s Journal of Scientific Research 2012;
5(2): 55-59.
30. Prashanti E, Jain N, Shenoy VK, dkk. Flexible dentures: a flexible option to
treat edentulous patients. J of Nepal Dental Association 2010: 11(1); 85-7.
31. Kutsch VK,Whitehouse J, Schermerhorn C, dkk. The evolution and
advancement of dental thermoplastics.. DentalTown Magazine 2003: 54.
32. Krzyżak1 A, Gąska J, Duleba B. Water absorption of thermoplastic matrix
composites with polyamide 6. Scientific Journals Maritime University of
Szczecin 2013: 33(105); 62–68.
33. Tuna SH, Keyf F, Gumus HA, Uzun C. The evaluation of water
sorption/solubility on various acrylic resins. European J of Dentistry 2008; 2:
34. Shah J, Bulbule N, Kulkarni S, Shah R, Kakade D. Comparative evaluation of
sorption, solubility and microhardness of heat cure polymethylmethacrylate
denture base resin & flexible (thermoplastic polyamide nylon) denture base
resin. J of Clinical and Diagnostic Research 2014; 8(8): 9-12.
35. Al-Habahbeh R. Water absorption and solubility of provisional crown and
bridge : the effect of the inclusion of polyethlene fibers. JRMS 2007; 14(1) :
22-25.
36. M Al-Bader R, M.Ziadan K ,S Al-Ajely M. Water adsorption characteristics
of new dental composite. Int J Med Res Health Sci 2015; 4(2): 281-286.
37. Rejab LT. The effect of the thermopress curing technique on the water
sorption and solubility of the cold and heat–cured acrylic resins. Al–Rafidain
Dent J 2008; 8(1); 11–17.
38. Wienaah MM. Sustainable plastic waste management – a case of Accra,
Ghana. TRITA-LWR Master Thesis 2007: 2,4,7,10-14.
39. Odior A , Oyawale FA , Odusote JK. Development of a polythene recycling
machine from locally sourced materials. Industrial Engineering Letters 2012;
2 (6): 42-3
40. Ming DWS. An experimental study of nylon recycling and its modification
using halogen based material. Dissertation submitted in partial fulfilment of
the requirements for the Bachelor of Engineering (Hons) (Chemical
Engineering) 2013: 4,10.
41. Silva E. Recycled polyamides, a literature review and research opportunities.
College of Textiles, NCSU, 2008: 2-7,14.
42. Dimone D, Socoteanu R, Pop Simona, et al. Overview on
mechanicalrecycling by chain extensionof POSTC-PET bottles.Research and
Development national Institute for Chemistry and Petrochemistry –ICECHIM,
Spl.Independentei, sector 6, Bucharest, Romania : 93.
43. Hopewell J, Dvorak R, Kosior E. Plastics recycling: challenges and
44. Worrel E, Reuter MA. Handbook of recycling state of the art for the
practicioners, analyst. 1st ed. Elsevier: USA, 2014 : 184.
45. Crespo JE , Parres F, Peydró MA, dkk. Study of rheological, thermal and
mechanical behavior of reprocesses polyamide 6. 53(4): 1-3, 10-15.
46. Kuram E, Tasci E, Altan AI, dkk. Investigating the effects of recycling
number and injection parameters on the mechanical properties of glass-fibre
reinforced nylon 6 using Taguchi method. Journal Elseiver 2013: 150.
47. Maspoch ML, Ferrando HE, Velasco JI. Characterisation of filled and
recycled PA6. Macromol. Symp 2003. 301-2.
48. Lem P, Bates P, Baylin B, dkk. Crystallization behaviour of post-industrial
waste nylon composites. Society of Plastic Engineers 2012: 1.
49. Baschek G, Hartwig G, Zahradnik F. Polymer. 1999: 3433.
50. McCabe JF, Walls A WG. Applied dental materials. 9th ed. Wiley-Blackwell,
2008: 110.
51. Goodship V. Management, recycling, and reuse waste of composites.
Woodhead Publishing Limited: Oxford, 2010 : 258-260.
52. M. Buccella, A. Dorigato, E. Pasqualini. Thermo-mechanical properties of
Polyamide 6 chemicallymodified by chain extension with Polyamide/
Polycarbonate blend. J Polym Res. 2012: 1.
53. BASF The Chemical Compamy. Upgrading of recycled plastic by additives.
Symposium: Plastic Forever Delft, November 2,2012: 6-7.
54. Achilias DS. Recent advances in the chemical recycling of polymers (PP, PS,
LDPE, HDPE, PVC, PC, Nylon, PMMA). Laboratory of Organic Chemical
Technology, Department Of Chemistry,Aristotle University Of Thessaloniki,
Thessaloniki, Greece. 2012: 3-4.
55. Dutta SS. Water absorption and dielectric properties of Epoxy insulation.
Norwegian University of Science and TechnologyDepartment of Electrical
