7
ABSTRAK
Dalam produksi aluminium proses elektrolisa membutuhkan media larutan elektrolit
yaitu berupa bath (kriolit). Bath memiliki komposisi diantaranya AlF3 dan CaF2 yang dapat mempengaruhi keasaman bath (Sa). AlF3 merupakan komponen penting di dalam bath untuk menurunkan titik lebur bath dan juga sebagai katalis. Keasaman bath pada operasi tungku
reduksi berkisar antara 8,5% - 11,5%. Keasaman bath yang tinggi akan menyebabkan liquid
temperatur turun dan kemampuan melarutkan alumina (Al2O3) berkurang ini akan mengganggu produktivitas aluminium yang menyebabkan efisiensi arus berkurang. Oleh karena itu, komposisi
keasaman bath harus dikontrol untuk efisiensi arus yang optimal.
8
THE CONTENT EFFECT OF AlF3 AND CaF2 IN COMPOSITION BATH
TO CURRENT EFFICIENCY AT PT INALUM KUALA TANJUNG
ABSTRACT
In the production of aluminum electrolysis process requires medium is an electrolyte
solution bath (cryolite). Bath has a composition such as AlF3 and CaF2 which can affect the acidity of the bath (Sa). AlF3 is an important component in the bath to lower the melting point bath and also as a catalyst. Acidity of the bath on the reduction furnace operation ranged
between 8.5% - 11.5%. High acidity of the bath which will cause a decrease in
liquid temperature and the ability to dissolve the alumina (Al2O3) is reduced this will reduce the productivity of aluminum which causes the current efficiency decreases. Therefore, the
composition of the acidity of the bath should be controlled for optimum current efficiency.