7e70e21827dfa36b08220f0ba6a2a8b5

(1)

Unofficial translation

MINISTERIAL REGULATION OF TRADE OF REPUBLIC OF INDONESIA NUMBER: 89/M-DAG/PER/10/2015

ON

EXPORT PROVISIONS OF INDUSTRY FORESTRY PRODUCT

WITH THE BLESSING OF THE ONE AND ALMIGHTY GOD

THE MINISTER OF TRADE OF THE REPUBLIC OF INDONESIA,

Considering: a. that in order to increase competitiveness of national industry, it is

need to do a simplification of licensing in the fields of trade, especially exports of industry forestry products;

b. that the provisions on the export of products of the forestry

industry in the Ministerial Regulation of Trade Number 97/M.DAG/PER/12/2014 on the export of Industry Forestry Products, as amended by the Ministerial Regulation of Trade Number 66/M-DAG/8/2015 is considered to be irrelevant;

c. that based on the consideration as referred to in paragraph b, it is

necessary to revoke the Ministerial Regulation of Trade Number 97/M-DAG/PER/12/2014 on Export Provisions of Industry Forestry Products as amended by the Ministerial Regulation of Trade Number 66/M-DAG/PER/8/2015 and re-arrange the export provisions of Industry Forestry Products;

d. that based on the considerations as referred to in paragraph a,

paragraph b, and paragraph c, it is necessary to stipulate Ministerial Regulation of Trade on Export Provisions of Industry Forestry Products.

In view of: 1. Law Number 7 Of 1994 On Ratification of the Agreement

Establishing the World Trade Organization (the Agreement Establishing the World Trade Organization) (State Gazette of the Republic of Indonesia Year 1994 Number 57, Supplement to the State Gazette of the Republic of Indonesia Number 3564);

2. Law Number 10 Of 1995 On Customs (State Gazette of the Republic of Indonesia Number 4412);

4. Law Number 39 Of 2008 On State Ministry (State Gazette of the

Republic of Indonesia Year 2008 Number 166, Supplement to the State Gazette of the Republic of Indonesia Number 4916);

(2)

of Indonesia Year 2014 Number 4, Supplement to the State Gazette of the Republic of Indonesia Number 5492);

6. Law Number 7 Of 2014 On Trade (Official Gazette of the Republic

of Indonesia Year 2014 Number 45, Supplement to the State Gazette of the Republic of Indonesia Number 5512);

7. Government Regulation Number 6 Of 2007 On Forest Management

and Forest Management Planning, and Forest Utilization (State Gazette of the Republic of Indonesia Year 2007 Number 22, Supplement to the State Gazette of the Republic of Indonesia Number 4696) as amended by Government Regulation Number 3 of 2008 (Official Gazette the Republic of Indonesia Year 2008 Number 16, Supplement to the state Gazette of the Republic of Indonesia Number 4814);

8. Presidential Regulation Number 10 Of 2008 On the Use of

Electronic System in respect to Indonesia National Single Window;

9. Presidential Decree Number 121/P Of 2014 On the Establishment

of the Ministry of Labor Cabinet Minister and Appointment Period 2014-2019;

10. Presidential Regulation Number 7 Of 2015 On the Organization of

State Ministries;

11. Presidential Regulation Number 48 Of 2015 On the Ministry of

Trade;

12. Presidential Decree Number 79/P Of 2015 on Reshuffle of Several

State Minister of Working Cabinet of 2014-2019 period;

13. Ministerial Regulation of Industry Number

41/M-IND/PER/6/2008 regarding Provisions and Procedures for Granting Industrial, Expansion Permit and Industrial Registered Permit;

14. Ministerial Regulation of Trade Number 28/M-DAG/ PER/6/2009

concerning Provisions on Export and Import Licensing Services with Electronic System through INATRADE within the framework of Indonesia National Single Window;

concerning Organization and Administration of the Ministry of Trade as amended by the Trade Minister Regulation Number 57/M-DAG/PER/ 8/2012;

16. Ministerial Regulation of Trade Number 35/M-DAG/PER/11/2011

on the export of rattan and rattan products;

on general provisions in the export sector;

on Goods Prohibited Exports;

19. Ministerial Regulation of Forestry Number P.18/Menhut-II/2013 of

Timber Legality Verification Information Portal Through Timber Legality Information System (SILK) and the issuance of V-Legal Documents;

20. Ministerial Regulation of Forestry Number P.43/ Menhut-II/2014

on the Assessment of Sustainable Production Forest Management Performance and Timber Legality Verification [for Permit Holders or in Right Forests, as amended by Regulation of the Minister of Environment and Forestry Number P.95/Menhut-II/2014;

(3)

HAS DECIDED

To stipulate: MINISTERIAL REGULATION OF TRADE ON EXPORT PROVISION OF INDUSTRY FORESTRY PRODUCT.

Article 1

In this Ministerial Regulation what is meant by:

1. Forestry Industry Product is processed wood products and its derivatives as well as rattan

goods.

2. Timber is part of trunk containing of cambium (ligno cellulose) excluding bamboo and / or

the like.

3. V-legal document is a document stating that the timber products export timber legality

verification standards in accordance with the provisions of the law and legislation.

4. Timber Legality Certificate, hereinafter referred to as S-LK is a certificate given to the permit holder, management right holder, or private forest owner stating that permit holder, management right holder, or private forest owner has met the standard of legality of timber.

5. Timber Legality Verification Agency, hereinafter abbreviated LVLK Indonesia are legal

entities that verify the legality of timber and has been designated by the Minister of Environment and Forestry as publisher of V-Legal Documents.

6. Verification or Technical is the investigation and examination of Industry Forestry

Products made by the surveyor.

7. Surveyor is a survey company that is authorized to perform verification or technical

surveillance.

8. Timber Legality Information System Online is an information system that serves as an

information center TLAS and media publishing V-Legal Documents.

9. Minister is the minister who held government affairs in the field of trade.

10. Director General is the Director General of Foreign Trade, Ministry of Commerce.

Article 2

(1) Export of Industry Forestry Products shall be limited.

(2) Industry Forestry Products restricted exports shall be divided into Group A, Group B and

Group C as listed in Annex I, which is an integral part of this Ministerial Regulation.

Article 3

Exports of Industry Forestry Products as referred to in Article 2 may only be carried out by:

a. Forest industry companies have Industrial Registration (TDI) or Industrial Business Permit

(IUI) and Company Registration (TDP); and

b. Export trading company in the field of Industry Forestry Products which have a Business

Permit (SIUP) and Company Registration (TDP).

Article 4

(1) Exports of Industry Forestry Products as referred to in Article 2 paragraph (2) included in

Group A shall be equipped with a V-Legal Documents issued by LVLK.

(2) Exports of Industry Forestry Products as referred to in Article 2 paragraph (2) included in

Group B is not equipped with a document V-legal but must be accompanied by documents which could prove that the raw materials derived from wood obtained from providers of raw materials that have been has S-LK or in accordance with the provisions of management of forest products under the provisions of the legislation.

(3) The provisions as referred to in paragraph (1) and paragraph (2) shall not apply to Group

C.

(4) V-Legal Documents as referred to in paragraph (1) shall be used as a complementary

(4)

Article 5 Article 4 (paragraph 1), must also meet the technical criteria.

(2) Technical criteria as referred to in paragraph (1) shall be listed in Annex II, which is an integral part of this Ministerial Regulation.

(3) Products Forestry Industry from coconut and palm wood in the form surfaced Four Side

(S4S) or subsequent processing can be exported and shall exempted from the technical criteria as referred to in paragraph (2).

Article 6

(1) The Industry Forestry Products as referred to in Article 5 (1) of doubtful fulfillment of technical criteria referred to in Article 5 (2) can be exported after being approved in a meeting of the Coordination Team.

(2) Coordination Team as referred to in paragraph (1) shall be determined by the Director

General on behalf of the Minister.

Article 7

(1) Each 1 (one) V-Legal Documents as referred to in Article 4 paragraph (1) may only be used

for 1 (one) time delivery of export customs notification.

(2) V-Legal Documents as referred to in paragraph (1) shall be sent by LVLK through SILK

Online to Indonesia National Single Window (INSW) portal electronically through http://inatrade.kemendag.go.id.

(3) Costs incurred on services publishing activity V-legal documents as referred to in

paragraph (1) shall be charged to the exporters with the amount determined by the cost-benefit principle.

Article 8

(1) The Industry Forestry Products as referred to in Article 5, paragraph 1 (a) may only be exported after verification or technical surveillance prior to loading.

(2) The verification or technical search as referred to in paragraph (1) shall be done by the surveyor appointed by the Minister.

(3) To be designated as the executor of Verification or Technical Export of Industry Forestry Products, Surveyor must fulfill the following requirements:

a.has a Letter of Permit Survey Services (SIUJS);

b.has been accredited as Inspection Board of the National Accreditation Committee (KAN);

c.have obtained a waiver of competence as a surveyor recognized technical capacity in the

field of verification or technical surveillance of Industry Forestry Products; and

d.has an extensive branch network in Indonesia.

(4) The verification or technical surveillance of Industry Forestry Products include:

a.administrative verification activities to:

1. industrial Registration (TDI) or Industrial Business Permit (IUI), for the

company's forestry industry;

2. business Permit (SIUP), for trading companies in the field of export of products of

the forestry industry;

3. company Registration (TDP); and

4. V-Legal Documents.

b. physical verification activities to;

(5)

2. quantity of goods;

3. type of wood;

4. fulfillment of technical criteria;

5. conformity examination between the description of goods with Tariff/HS;

6. supervision of loading into containers, if the shipment of containerized; and

7. installation of the seals on the container if all the goods in the containers are inspected by the Surveyor.

(5) Verification or technical surveillance as referred to in paragraph (4) shall be written in the

form of Surveyor Report (LS) to be used as customs complementary document required for the submission of export customs declarations to the customs office.

Article 9

LS as referred to in Article 8 paragraph (5) shall include a statement of truth on the results of verification or technical surveillance and become Surveyor's responsibility.

Article 10

(1) The Surveyor shall convey LS which had been issued through

http://inatrade.kemendag.go.id portal that will be forwarded to the INSW.

(2) For Surveyor who publishes LS in the port shall submit the mandatory LS as referred to in

paragraph (1) after LS was issued.

(3) For the Surveyor who issues LS in addition to the mandatory port shall submit the LS as

referred to in paragraph (1) no later than 1 (one) week after the issuance.

Article 11

(1) The Surveyor shall submit a written report on the activities of verification or technical surveillance of the implementation of every month.

(2) The written report as referred to in paragraph (1) shall be submitted not later than 15 (fifteen) of the following month to the Director General with a copy to the Director General of the Ministry of Agro Industry and Director General of Sustainable Forest Management Ministry of Environment and Forestry.

Article 12

Costs arising from the activities of verification or technical surveillance as referred to in Article 11 shall be charged to the Government.

Article 13

(1) Company as referred to in Article 3 shall report:

a. plans and realization of annual production, and plans and realization of forestry

export for industry forestry company; or

b. plans and realization of annual exports, for the export trading company in the field of

Industry Forestry Product.

(2) The report as referred to in paragraph (1) shall be submitted no later than the end of February to:

a. realization of production and exports of the previous year, and the planned production

and export of the current year, the company's forestry industry; or

b. previous year export realization and export plan of the current year, for trading

companies in the field of export of Industry Forestry Products.

(6)

(4) The report as referred to in paragraph (1) shall be submitted to the Director General of

electronically via http://inatrade.kemendag.go.id with a copy to the Director General of the

Ministry of Agro Industry and Director General of Sustainable Forest Management Ministry of Environment and Forests.

Article 14

(1) Companies that do not implement the obligations as referred to in Article 13, shall be sanctioned by revocation of permits:

a.Industrial Registration Number (TDI) or Industrial Business Permit (IUI), for the

company's forestry industry.

b. Trading Business Permit (SIUP), for trading companies in the field of export of

Industry Forestry Products.

(2) The imposition of sanctions as referred to in paragraph (1) shall be carried out by the official publisher of permitting based on the competent authorities of permit fostering agency.

Article 15

Surveyor who does not carry out obligations:

a. as referred to in Article 9 sanction of revocation of the right to receive a fee for the Verification or Technical Export of Industry Forestry Products.

b. as referred to in Article 10 and Article 11 sanctioned revocation determination as executors

of verification or technical surveillance of Export of Industry Forestry Products.

Article 16

(1) To the export of Industry Forestry Products which are examples of goods, materials research, and consumer goods exhibitions abroad shall be exempted from the provisions of this Ministerial Regulation after obtaining the approval of the Director General.

(2) Approval as referred to in paragraph (1) shall be issued on the recommendation of the technical ministries.

Article 17

Exports of Industry Forestry Products as referred to in Article 2 which includes Group A in the form of Pulp and Paper raw materials used paper and / or non-timber shall be exempted from this Ministerial Regulation after obtaining recommendation of the Director General of Agro-Industry, Ministry of Agriculture.

Article 18

Technical manual implementation of this Ministerial Regulation shall be determined by the Director General.

Article 19

At the time this Ministerial Regulation shall comes into force:

a. The provisions concerning the obligation to obtain recognition as a Registered Exporter

Industry Forestry Products (ETPIK) in the Minister of Trade Number 35/M-DAG/PER/ 11/2011 on the export of rattan and rattan products; and

b. Ministerial Regulation of Trade Number 97/M-DAG/PER/ 12/2014 on Export of Industry

Forestry Product as amended by the Ministerial Regulation of Trade Number 66/M-DAG/PER/8/ 2015,

shall be revoked and declared invalid.

(7)

This Ministerial Regulation shall come into force since 30 (thirty) days from the date of promulgation.

For public cognizance, this Ministerial Regulation shall be promulgated by placing in the State Gazette of the Republic of Indonesia.

Enacted in Jakarta On October 19, 2015

MINISTER OF TRADE OF THE REPUBLIC OF INDONESIA,

signed.

THOMAS TRIKASIH LEMBONG

Copies of the original Secretariat General Ministry of Trade Head of Legal,

signed.

LASMININGSIH

(8)

MINISTERIAL REGULATION OF TRADE OF THE REPUBLIC OF INDONESIA NUMBER 89/M-DAG/PER/10/2015

ON

INDUSTRY FORESTRY PRODUCTS THAT IS EXPORT RESTRICTED

GROUP A

Wood in chip or particles.

2. Ex. 4404.10.00.00 all four sides so that the surface becomes flat and smooth with a thickness exceeding 6 mm (S4S); processed timber obtained by connecting sawn timber that has been dried and planed four sides after the process of finger jointed with a thickness exceeding 6 mm.

4. Ex. 4408.10.10.00 to

Ex. 4408.90.90.00

Veneer sheets (jointed or not) and timber sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm.

5. Ex. 4409.10.00.00 to

Ex. 4409.29.00.00

Timber (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges or faces, whether or not planed, sanded or finger-jointed.

6. Ex. 4410.11.00.00 to

Ex. 4410.90.00.00

Particle board and similar board of timber or other ligneous materials, whether or not agglomerated with resins or other organic binding substances.

7. Ex. 4411.12.00.00

Plywood, veneered panelsand similar laminated timber.

9. Ex. 4413.00.00.00 Densified timber, in blocks, plates, strips or profiles.

10. Ex. 4415.10.00.00 Ex. 4415.20.00.00

(9)

11. Ex. 4418.10.00.00 to

Ex. 4418.90.90.00

Builders’joinery and carpentry of wood, including cellular wood panels, assembled parquets panels, shingles and shakes.

12. Ex. 4421.90.20.00 Match splints.

13. Ex. 4421.90.99.00 Paving blocks, of wood.

14. 4701.00.00.00 Mechanical wood pulp.

15. 4702.00.00.00 Chemical wood pulp, dissolving grade.

16. 4703.11.00.00

Chemical wood pulp, sulphit, other than dissolving grade.

18. 4705.00.00.00 Wood pulp obtained by a combination of mechanical and chemical pukping processes.

19. Ex. 4802.10.00.00 to

Ex. 4802.69.00.00

Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non perforated punch-card and punch tape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading 48.01 0r 48.03; hand-made paper and paperboard, derived from wood.

20. Ex. 4803.00.30.00 Ex. 4803.00.90.00

Toilet or facial tissue stock, towel or napkin stock and similar paper of a kind used for household or sanitary purposes, cellulose wadding and webs of cellulose fibres, whether or not creped, crinkled, embossed, perforated, surface-coloured, surface-decorated or printed, in rolls or sheets, derived from wood.

21. Ex. 4804.11.00.00

- Sack kraft paper, unbleached of a type that is used to produce cement sack, which are derived from wood.

(10)

24. Ex. 4806.10.00.00 to

Ex. 4806.40.00.00

Vegetable parchment, greaseproof papers, tracing papers and glassine paper as well as glazed transparent or other translucent papers, in rolls or sheets, derived from wood,

25. Ex. 4807.00.00.00 Composite paper snd paperboard (made by sticking flat layers of paper or paperboard together with an adhesive), uncoated or impregnated surface, whether or not internally reinforced, in rolls or sheets, derived from wood.

26. Ex. 4808.10.00.00 flat surface sheets0, creped, crinkled, embossed or perforated, in rolls or sheets, other than papers described in post 48.03, derived from wood.

27. Ex. 4808.40.00.10 Sack kraft paper, derived from wood.

28. Ex. 4809.20.00.00 to

Ex. 4809.90.90.00

Carbon paper, other copying or transfer papers (including coated or impregnated paper for duplicator stencils or without bound material, and without other coating, whether or not coloured, decorated or printed on its surface, in rolls or rectangular (including square) sheets of variables size, derived from wood.

30. Ex. 4811.10.21.00 to

Ex. 4811.90.99.00

Paper, paperboard, cellulose wadding and webs of cellulose fibres, coated, impregnated, covered, coloured on its surface, decorated or printed on its surface, in rolls or rectangular (including square) sheets, of variable sizes, other than goods decribed in post 48.03, 48.09 or 48.10, derived from wood.

31. Ex. 4812.00.00.00 Filter blocks, slabs and plates, of pulp paper, derived from wood.

32. Ex. 4813.10.00.00 to

Ex. 4813.90.90.00

Cigarette paper, whether or not cut to size, in the form of booklets or tubes, derived from wood.

33. Ex. 4814.20.00.00 Ex. 4814.90.00.00

Wallpaper and similar wall coverings; window transparencies paper, derived from wood.

(11)

35. Ex. 4817.10.00.00 to

Ex. 4817.30.00.00

Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery, derived from wood.

36. Ex. 4818.10.00.00 to

Ex. 4818.90.00.00

Toilet paper and similar paper, cellulose wadding or webs of cellulose fibres, of a kind used for household or sanitary purposes, in rolls of a width not exceeding 36 cm, or cut to certain size or shape; handkerchiefs, cleansing tissues, towels, tablecloths, serviettes, bed sheets and similar household, sanitary or hospital articles, articles of apparel and clothing accessories, of paper pulp, paper, cellulose wadding or webs of cellulose fibres, derived from wood.

37. Ex. 4821.10.10.00 to

Ex. 4821.90.90.00

Paper or paperboard labels of any kinds, whether or not printed, derived from wood.

38. Ex. 4822.10.10.00 to

Ex. 4822.90.90.00

Bobbins, spools, cops and similar supports of paper pulp, paper or paperboard (whether or not perforated or hardened), derived from wood.

39. Ex. 4823.20.10.00 to

Ex. 4823.90.99.00

Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape; other articles of paper pulp, paper, paperboard, cellulose wadding or webs of cellulose fibres, derived from wood.

40. 9406.00.92.00 Prefabrication building, derived from wood.

GROUP B.

NO NUMBER TARIFF POST (HS)

GOODS DESCRIPTION

1. Ex. 4414.00.00.00 Wooden frames for paintings, photographs, mirrors or similar objects.

2. Ex. 4414.00.00.00 Ex. 4416.00.90.00

Casks, barrels, vats, tubs and other cooper’s products and parts thereof, made of wood, including staves for casks.

3. Ex. 4417.00.10.00 Ex. 4417.00.90.00

Tools, tool bodies, tool handles, broom or brush bodies and handles of wood; boot or shoe lasts and tress, of wood.

(12)

5. 9401.61.00.00 Other seats with wooden frames, upholstered.

6. 9401.69.00.10 9401.69.00.90

Other (other seats with wooden frames, other than upholstered).

7. 9403.30.00.00 Wood furniture of a kind used in offices.

8. 9403.40.00.00 Wood furniture of a kind used in kitchen.

9. 9403.50.00.00 Wood furniture of a kind used in bedrooms.

10. 9403.60.00.00 9403.60.90.00

Other wood furniture.

11. 9403.90.90.00 Part of furniture made of wood

GROUP C

NO. NUMBER TARIFF POST (HS)

GOODS DESCRIPTION

1. 4601.22.00.00 Mats and screens made of rattan.

2. 4601.12.00.00 Basketwork and wickerwork made of rattan.

3. 9401.51.00.10 Seats made of rattan.

4. 9403.81.00.10 Bedrooms, dining rooms or family rooms furniture made of rattan.

Signed.

LASMININGSIH

ANNEX II

(13)

ON

EXPORT PROVISION OF FORESTRY INDUSTRIAL PRODUCT

TECHNICAL CRITERIA USED TO DETERMINE CERTAIN INDUSTRY FORESTRY PRODUCTS THAT CAN BE EXPORTED

1. The size and level of processed

a. Processes timber in the form of S4S (surfaced four sides) which included HS.4407:

Processed timber product that is levelled on four sides so that the surface becomes flat and smooth.

- derived from merbau timber with the provisions of cross-sectional area not exceed than 10,000 mm2.

- derived from other than merbau timber with the provisions of cross-sectional area of not more than 4,000 mm2.

b. Processed timber in the form of E2E or E4E included HS.4409:

Processed wood products derived from S4S by curved corner on two (2) corner (E2E) or four (4) point (E4E) with the provisions of the curved angle of at least 3 mm (R3).

- derived from merbau timber with the provisions of cross-sectional area of not more than 10,000 mm2.

- derived from other than merbau timber with the provisions of cross-sectional area of not more than 4,000 mm2.

c. Finger Jointed which included HS.4407:

Processed wood products are produced by connecting lumber dried and planed four sides after the finger jointed with the provisions of the length of each keeping connected is not more than 1,000 mm.

d. Laminated board (Jointed Board) which included HS 4412: Processed wood products resulting from incorporation of wood chips toward the wide cross-section by means of compressed (pressed) using adhesive, provided the cross sectional area of each keeping no more than 4,000 mm2.

e. Laminated Block which includes HS 4412:

Processed wood products resulting from incorporation of wood chips toward the thick cross-section by means of compressed (pressed) using adhesive, provided the cross sectional area of each keeping no more than 6,000 mm2.

f. Decorative Profile that includes HS.4409:

Processed timber products are produced by forming a timber by moulder machine, such that display the beauty function (decorative function) and can be used directly without changing the form, but cut it to the size required length, with the following conditions:

1) The size of cross-sectional area of not more than 12,750 mm2. 2) For Decorative Home Profile width:

- Decorative at least half (1/2) the face width on one side;

(14)

3) for the heavy face Decorative Profile:

- Decorative at least half (1/2) thick face on one side;

- Width of not more than 50 mm, decorative depth of at least 3 mm; - A width of more than 50 mm s.d. 80 mm, decorative depth of at least 6

mm.

- A width of more than 80 mm s.d. 100 mm, decorative depth of at least 15 mm.

- A width of more than 100 mm, decorative depth of at least 20 mm.

Decorative Profile for the size of the cross-sectional area of less than 1,000 mm2 is not exposed to the provisions of the size and depth of its decorative.

When there is a profile on a two (2) sides of the depth of the profile is the sum of two (2) sides.

g. Wood Profile to frame doors (Door Jamb) or Frame Window (Window Jamb) is included HS.449:

With the provision of cross-sectional area of not more than 7,200 mm2.

h. Wood Frame profile for doors (Door Frame) or Frame Window (Window Frame) were included HS.4409:

With the following conditions: -Thickness of no more than 40 mm;

-Cross-sectional area of not more than 6,600 mm2.

i. Wall panels are included HS.4409:

Having a thick size of not more than 20 mm in cross-sectional area of not more than 4,000 mm 2 in the form of a tongue and groove (tongue and groove), the

j. Flooring which included HS.4409:

Having a thick size of no more than 35 mm cross-sectional area of not more than 7.000 mm2 in the form of a tongue and groove (lidah and alur), the groove and the groove (alur and alur) or shiplap, with the following conditions:

-Width of not more than 50 mm high and has a tongue in groove or shiplap at

k. Decking is included HS.4409:

Having a thick size of not more than 45 mm and cross-sectional area of not more than 9,000 mm2, with the following provisions:

-The type of wood merbau, keruing kempas, bangkirai, lime, ironwood, and chaos;

(15)

-More than 20 mm thick s.d. 35 mm has the reeded / groove on the broad side of at least 3 mm.

-More than 35 mm thick s.d. 45 mm has the reeded / groove on the broad side of at least 5 mm.

When there reeded / groove at 2 (two) sides of the depth reeded / groove is the sum of two (2) sides.

At least half the width of the surface should be reeded or by 2 (two) groove with a distance proportional to the whole timber.

l. Flooring for Truck, Container, Ship Deck and Wagon that included HS.4409: In the form of a tongue and groove (lidah and alur) or shiplap, with the following conditions:

-of merbau, keruing kempas, and bangkirai timber type; -thickness is no exceedre than 50 mm;

-cross-sectional area is not exceed than 12 000 mm2; -groove and tongue high and shiplap is at least 5 mm depth.

Special pole, main sill, cross sill and truck body must be submitted by an image that contains completely technical specifications (picture sets installed) and must be exported along with its flooring.

m. Pallet boxes and pallet board (HS.4415): Must be in the installed form.

n. Building elements of wood which is a unit of the unity of the building (HS.4418); Must be in the form of a set of building elements with pictures containing complete technical specifications without changing the shape and cut.

o. Prefabricated buildings of wood (HS.9406):

Must be in the form of prefabricated buildings set along with images containing SCARA complete technical specifications without changing the shape and cut.

p. Post and Beam shall included HS.4409:

Processed timber products in the form of E4E and is reeded/grooved, with the following provisions:

-cross-sectional area is not exceed than 4,500 mm2, reeded/grooved on 2 (two) sides, with a depth on each side of at least 2 mm;

-cross-sectional area is not exceed than 8,100 mm2, reeded/grooved at 4 (four) sides, with a depth on each side of at least 2 mm.

-cross-sectional area is above 8.100 mm2 up to 14,400 mm2, reeded/grooved at 4 (four) sides, with a depth on each side of at least 4 mm.

q. Window Board which is included HS.4409: With the following provisions:

-one of the thick side shall be shaped with bullnose profile (curved semicircle); -thick size is not exceed than 30 mm;

-cross-sectional area is not exceed than 7.800 m2.

2. Tolerance for size and defect.

a. all sizes of exported processed timber shall be provided a size tolerance as follows:

(16)

b. defect due to machining (machine-defect) allowed no more than 5% of the total exported volume.

MINISTER OF TRADE

OF THE REPUBLIC OF INDONESIA

Signed.

Signed

LASMININGSIH

ANNEX III

(17)

ANNUAL PLAN PRODUCTION REPORT YEAR:

Name of Company:

No. Description of Goods Total of Goods

Amount Unit

TOTAL

Signed.

LASMININGSIH

ANNEX IV

(18)

ANNUAL REALIZATION PRODUCTION REPORT YEAR:

Name of Company:

No. Description of Goods Total of Goods

Amount Unit

TOTAL

Signed.

LASMININGSIH

ANNEX V

(19)

NUMBER 89/M-DAG/PER/10/2015 ON

ANNUAL EXPORT PLAN REPORT YEAR:

Name of Company:

No. Tariff Post

(HS)

Description of Goods

Number of Goods Destination Country

Total Unit

TOTAL

Signed.

LASMININGSIH

ANNEX VI

ON

(20)

ANNUAL REPORT OF EXPORT REALIZATION YEAR:

Name of Company:

No. Tariff Post (HS)

Description of Goods

Number of Goods

Value of Goods Destination Country

Total Unit Value MTU*)

TOTAL Note:

*) MTU : Currency Country Code

THE MINISTER OF TRADE OF REPUBLIC OF INDONESIA

signed.

Signed.