THE ZINC ANODE PERFORMANCE FOR SACP AN INVESTIGATION OF WARSHIP UNDERWATER STRUCTURES
7. ACKNOWLEDEMENT
Indonesian Naval Technology College, STTAL Postgraduate International Conference, Vol. 2 ICMST 2018 July, 26th 2018
100 Fig. 17. Plumbum Element
3.4.6 Plumbum (Pb) Element.
Base of theoritic graphics for Plumbum (Pb) element (fig. 17), showed that specimen A has 0,0087% in dry test and 0,000056% in wet test.
Speciment B has 0,0111% in dry test and 0,00007%
in wet test. Speciment C has 0,0422% in dry test and 0,00428% in wet test. In dry test, all of speciment not in category, but in wet test all of speciment include in category.
6. CONCLUSION.
a. The result of dry chemical composition test showed that speciment A have 99,8% (Zn), 0,121% (Al), 0,0141% (Cd), 0,0004% (Cu), 0,002% (Fe), 0,0087%
(Pb), 0,0007% (Si). Speciment B showed that 99,9% (Zn), 0,0045% (Al), 0,0001%
(Cd), 0,0026 % (Cu), 0,002% (Fe), 0,0111% (Pb), 0,0005% (Si). Speciment C showed that 99,6% (Zn), 0,102% (Al), 0,0023% (Cd), 0,077 % (Cu), 0,0272%
(Fe), 0,042% (Pb), 0,0008% (Si).
b. The result of wet chemical composition test showed that speciment A have 1,4502% (Zn), 0,163% (Al), 0,00311%
(Cd), 0,0000276 % (Cu), 0,00005% (Fe), 0,000056% (Pb). Speciment B showed that 1,4723% (Zn), 0,0096% (Al), 0,0002% (Cd), 0,000018 % (Cu),
0,0016% (Fe), 0,00007% (Pb).
Speciment C showed that 1,456% (Zn), 0,0896% (Al), 0,00065% (Cd), 0,005 % (Cu), 0,0156% (Fe), 0,00428% (Pb).
c. The result of corrosion potential test without Mild steel showed that 1,005V for speciment A, 0,977V for speciment B, 0,994V for speciment C. Zinc with Mild steel A showed 0,83V for speciment A, 0,87V for speciment B, 0,829V for speciment C
d. Based of chemical composition test, speciment A and B is accomplished from US Military Specifications standard, but speciment C doesn’t accomplish.
e. Based of corrosion potential measurement test, all of speciment can used for sacrifice anode.
Indonesian Naval Technology College, STTAL Postgraduate International Conference, Vol. 2 ICMST 2018 July, 26th 2018
101 Al-Himdani, FF, Mahdi, WI & Khuder, AWH 2005, 'Corrosion Protection of Coated Steel Pipeline Structures using CP Technique', Journal of Engineering and Development.
Al-Sultani, KF. & Nabat, JN 2012, 'Protect of Underground Oil Pipelines by Using (Al-Sn-Zn) as Sacrificial Anode in Al-Qasim Region', Journal of American Science, pp. 158-165.
Andrade, C, Gulikers, J, Polder, R & Raupach, M 2003, 'Half-cell potential measurements – Potential mapping on reinforced concrete structures ', RILEM, pp. 461-471.
Baere, KD, Verstraelen, H, Rigo, P, Passel, SV, Lenaerts, S & Potters, G 2013, 'Reducing the cost of ballast tank corrosion: an economic modeling approach', vol 32.
Basham, DL, Wright, JW, Ferguson, K & Moy, GW 2003, Operation and Maintenance : Cathodic Protection, UFC.
Briggs, T & Eseonu, YM 2014, 'Efficiency of Corrosion Inhibitors on Cathodic Protection System', International Journal of Engineering Trends and Technology (IJETT).
Cassinath, Z 2013, Development of Twin Screw Rheo Extrusion Technology, Brunel Centre for Advanced Solidification Technology (BCAST).
Deborde, J, Refait, P, Bustamante, P & Caplat, C 2015, 'Impact of Galvanic Anode Dissolution on Metal Trace Element Concentrations in Marine Waters', vol 226.
Emami, MRS 2012, 'An Experimental and Theoritical Investigation of Corrosion Mechanism in a Metallic Stack', Iranian Journal of Materials Science &
Engineering, vol 9, no. 3, pp. 58-66.
Fontana, MG 1987, Corrosion Engineering, McGraw Hill,Inc, Singapore.
Hafizh, MM, Sunhaji, A, Norhayati, S & Noriyati, S 2015, 'Performance Analysis of 99.5% Alumunium Alloy as a Sacrificial Anode', vol 11.
Ivanov, H 2016, Corrosion Protection System in Offshore Structure, University of Akron, Ohio.
Javadi, M, J.Javidan & Salimi, M 2104, 'Cathodic Protection of an underground Pipeline by Photovoltaic Power System using Intelligent Method', International Journal of Renewable Energy Research, pp. 267-274.
Jeong, JA, Choo, YG, Jin, CK & Park, KW 2014, 'Numerical Analysis Result of The Cathodic Protection for The Underground Steel Pipe by Anode Installation Method', vol 38.
Jeong, JA & Jin, CK 2014, 'The effect of Cathodic Protection System by Means of Zinc Sacrifial Anode on Pier in Korea', Journal of the Korean Society of Marine Engineering, pp. 1206-1211.
Khavasfar, A, Moayed, MH & Attar, MM 2007, 'An Investigation on the Performance of an Imidazoline Based Commercial Corrosion Inhibitor on CO2 Corrosion of Gas-well Tubing steel by EIS Technique ', Iranian Journal of Materials Science and Engineering, vol 4, no. 3, pp. 1-8.
Kumar, GM, I., N & Ajitha, AMVU 2014, 'Inductively Coupled Plasma Atomic Emission Spectroscopy : An Overview', International Journal of Pharmaceutical Research & Analysis, pp. 470-477.
Kumar, S, Rajalingam, K & G.R.Kannan 2014, 'Numerically Analysis of Corrosion Resistance and Control Plate'.
Loto, CA & Popoola, API 2011, 'Effect of Anode and Size Variation on The Cathodic Protection of Mild Steel in Sea Water and Sulphuric Acid ', vol 6.
Mahasiripan, A, Tangtermsirikul, S & Sancharoen, P 2014, 'A study of Different Sacrificial Anode Materials to Protect Corrosion of Reinforcing Steel in Concrete', vol 19, no. 4.
Masli, AB 2011, Interaction Between Cathodic Protection and Microbially Influenced Corrosion, University of Manchester, Manchester.
Indonesian Naval Technology College, STTAL Postgraduate International Conference, Vol. 2 ICMST 2018 July, 26th 2018
102 McCafferty, E 2010, Introduction to Corrosion Science, Springer , New York.
NACE 2002, NACE Corrosion Engineer's Reference Book, NACE International The Corrosion Society, Houston.
Nguyen, CV, Lambert, P, Mangat, P, O'Flaherty, F &
Jones, G 2012, 'The Performance of Carbon Fibre Composites as ICCP Anodes for', ISRN Corrosion, p. 9.
Panah, MB & Ajani, N 2016, 'Synthesis and Study of Corrosion Performance of Epoxy Coating Containing Multi-walled Carbon Nanotube/Polyortho Aminophenol Nanocomposite', Iranian Journal of Materials Science & Engineering , vol 13, no. 1, pp.
1-10.
Ramesh, SPM & Periasamy, V 2014, 'Synergic effect of Thiomalic acid and Zinc ions in Corrosion control of Carbon Steel in Aqueous Solution', Research Journal of Chemical Sciences, pp. 41-49.
Rehman, A, Amin, F & Abbasm, M 2014, 'Sacrificial Protection Method During Disinfection to Avoid Corrosion', vol 34.
Roberge, PR 1999, Handbook of Corrosion Engineering, Mc Graw Hill Company, Highstown, United State.
Rogers, TH 1974, Marine Corrosion, Science and technology, George, London.
Ryan, J & Clark, ML 2010, 'Trace metal determination in tobacco and cigarette ash by inductively coupled plasma-atomic emission spectroscopy', Concordia College Journal of Analytical Chemistry 1, pp. 34-41.
Susilo, AK, Ahmadi, Suharyo, OS & Pratisna, P 2017, 'Applied of Impressed Current Cathodic Protection Design for Fuel Pipeline Network at Naval Base', International Journal of Materials Science &
Engineering , vol 14, no. 2, pp. 41-52.
Talbot, D & Talbot, J 1998, Corrosion Science and Technology, CRC Press, Florida.
Trejo, D, Reinschimdt, K & Halmen, CI 2009, Corrosion Performance Tests For Reinforcing Steel in Concrete : Technical Report, Texas Transportation Institute, Texas.
Yazdani, A, Soltanieh, M & Aghajani, H 2009, 'Study on Corrosion Properties of plasma Nitried Pure Aluminium', Iranian Journal of Materials Science and Engineering, vol 6, no. 4.
Postgraduate International Conference, Vol. 2 ICMST 2018 July, 26th 2018
103