Bibliography

Johansson, R. (1993). System Modeling and Identification, Prentice Hall, Englewood Cliffs, New Jersey.

Knudsen, M. (2004). Experimental Modelling of Dynamics Systems, Department of Control Engineering, Aalborg University

Ljung, L. (1995). System Identification, Sweden, Department of electrical Engineering, Linkoping University

Ljung, L. (1997). Nonlinear Black-Box Modelling on System Identification, Sweden, Department of electrical Engineering, Linkoping University

Ljung, L. (1999). System Identification: Theory for the User, Prentice Hall, Upper Saddle River NJ

Ljung, L. (2002). Prediction Error Estimation Methods, Circuits Systems Signal Processing, Vol. 21, No. I. pp. 11 - 21

Ljung, L. (2008). Perspectives on System Identification, Division of Automatic Control, Linköping University Sweden

Ljung, L. (2009). Perspectives on System Identification. Sweden, Report no.: LiTH- ISY-R-2900, Division of Automatic Control

Ljung, L. (2010). Approaches to Identification of Nonlinear Systems, Division of Automatic Control, Linköping University Sweden

Ljung, L., Hjalmarsson H., Ohlsson H. (2011). Four Encounters with System Identification, Sweden, Division of Automatic Control, Linkoping University Ljung, L. (2011). Approaches to Identification of Nonlinear System, Sweden,

Division of Automatic Control, Linkoping University

Qingchang, R. (1990). Prediction Error Method for Identification of a Heat Exchanger, Eindhoven University of Technology Research Reports, 1990 Raymond Chong and Shao Fen. (1995). Manual Book of QAD Model BDT 921/M3;

Boiler Drum and Heat Exchanger Process Control Training System, Unpublished

Shah R. K. and Sekulic D. P. (2003). Fundamentals of Heat Exchanger Design, John

Wiley & Sons, Inc.

36

Soderstrom, T. and Stoica, P. (2001). System Identification, New York, Prentice Hall Tatang Mulyana, Mohd Nor Mohd Than, Parametric and Nonparametric Identification of Shell and Tube Heat Exchanger Mathematical Model, UTHM Thesis, 2014

Tatang Mulyana, Mohd Nor Mohd Than, Modeling and Simulation of Co Current Shell and Tube Heat Exchanger Model HE158C, International Journal of Integrated Engineering (IJIE), UTHM, 2011

Tatang Mulyana, Mohd Nor Mohd Than, Dirman Hanafi and Afrodi Ali, Digital Control Design for the Boiler Drum BDT921, Journal of Mechanics Engineering and Automation (JMEA), David Publishing Company, 2011 Tatang Mulyana, Mohd Nor Mohd Than and Dirman Hanafi, A Discrete Time Model

of Boiler Drum and Heat Exchanger QAD Model BDT 921, Asian Journal of Mechanical Engineering (AJME) Part A: Fluid, Thermal and Energy System, 2011

Tatang Mulyana, Mohd Nor Mohd Than, Intan Najiha Mohd Shukri, Identification of Heat Exchanger Plant, Book Project: "MATLAB", ISBN 979-953-307-774- 0, 2011

Tatang Mulyana, Mohd Nor Mohd Than, Dirman Hanafi, Shafura Shariff, Lecture Notes in Computer Science: Identification of Heat Exchanger QAD Model BDT921 based on Various Model Approach: ARX, ARMAX, BJ and OE Models, Second International Conference on Recent Trends in Information Processing & Computing – IPC 2011

Tatang Mulyana, Mohd Nor Mohd Than, Dirman Hanafi, Afrodi Ali, Digital Control Design for the Boiler Drum BDT921, Proceeding of Conf. on Industrial and Appl. Math. (CIAM2010), Indonesia 2010

Tatang Mulyana, Mohd Nor Mohd Than, Dirman Hanafi, A Discrete Time Model of Heat Exchanger Types HE158C, 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2010), 19-21 July 2010, Antalya, Turkey

Tatang Mulyana, Mohd Nor Mohd Than, Dirman Hanafi, Intan Najiha Mohd Shukri, Identification of Co Current Plate Heat Exchanger Model HE158C, Proceeding of Conf. on IEEE Student Conference on Research and Development (IEEE SCOReD 2010), UNITEN, Bangi, Malaysia 2010 D73 - 1

Tatang Mulyana, Mohd Nor Mohd Than, Modeling and Simulation of Co-Current Shell and Tube Heat Exchanger Model HE158C, Proceeding on Post Graduate Seminar (PGS 2010), UTHM Johor, Malaysia 2010, EE01-1 Tatang Mulyana, Aini Azilah Ramli, Mohd Nor Mohd Than, Modeling and

Simulation of a Double Pipe Heat Exchanger Model HE158C by using GUI MATLAB, Accepted paper for the 12th International Conference on Quality in Research (QiR) 2011, 4-7 July Bali Indonesia, Paper code: bd4d340ca6 Symposium: VIII. Electrical Engineering 2012-12-12

Tatang Mulyana, Farah Najaa Suhaimi, Dirman Hanafi, Mohd Nor Mohd Than, ARX Model of Four Types Heat Exchanger Identification, Malaysian Technical Universities International Conference 2011 (MUiCET 2011), 13 - 15 November 2011, Batu Pahat, Johor

Tatang Mulyana, Mohd Nor Mohd Than, Dirman Hanafi, Nuur Rusilawati,

Identification NLARX Model of Four Types Heat Exchanger HE158C based

on the MATLAB System Identification Toolbox, International Conference

37

on Advance Computer Science and Information System 2011 (ICACSIS 2011), Hotel Mercure Ancol, Jakarta

Tatang Mulyana, Mohd Nor Mohd Than, Noor Adzmira Mustapha, Identification of Heat Exchanger QAD Model BDT 921 Based on Hammerstein-Wiener Model, International Seminar on the Application of Science & Mathematics 2011 (ISASM 2011), 1 - 3 November 2011, Putra World Trade Centre, Kuala Lumpur, Malaysia

Tatang Mulyana, Mohd Nor Mohd Than, ARX Model of QAD BDT 921 Heat Exchanger Identification, International Conference on Mathematics and Science 2011 (ICOMSc 2011), 12-13 October 2011 at Majapahit Hotel, Surabaya, Indonesia

Dirman Hanafi, Mohd Nor Mohd Than, Abdulrahman A.A. Emhemed, Tatang Mulyana, Amran Mohd Zaid and Ayob Hj. Johari, Heat Exchanger‘s Shell and Tube Modeling for Intelligent Control, 2011 International Conference on Industrial and Intelligent Information, April 1-3, 2011, Bali, Indonesia

Tatang Mulyana was born in Bandung, Indonesia, in 1962. He

received Physic degree from Padjadjaran University (UNPAD), Bandung, Indonesia,

in 1987. He received M.Tech degree in Nuclear Engineering with Instrumentation

and Control System Program Study from Bandung Institute of Technology (ITB),

Indonesia, in 1996, and Ph.D. degree in Electrical Engineering from Universiti Tun

Hussein Onn Malaysia (UTHM), in 2014. In 1988-2000, he joined Nuclear

Engineering Research Center, the National Atomic Energy Agency (PPTN-

BATAN), Bandung, Indonesia, as a Researcher with field research of Physic and

Metallurgy and Design of Nuclear Power Plant. In 2000-2004, he joined Universiti

Teknologi Malaysia–Kolej Legenda Langkawi (UTM-KLL), as a Lecturer in

Computer Science School. In 2004-2014, he joined Universiti Tun Hussein Onn

Malaysia (UTHM), as a Lecturer in Electrical and Electronic Engineering Faculty,

and since 2014, he has been working in Telkom University, Bandung, Indonesia, as a

Lecturer in Department of Industrial Engineering, Faculty of Industrial & System

Engineering. His current research interests include heat exchanger and boiler drum

system identification, power plant control design and implementation, manufacturing

production system and automation.

38

39