34
Corresponding Address
35
BOARD OF PROFESSORS
Prof. Dr. Ir. Widodo W. Purwanto, DEA
[email protected] (Ir, ITS; DEA and Dr, ENSIGC-INP Toulouse, France): Sustainable energy.
Prof. Dr. Ir. Mohammad Nasikin, M.Eng
[email protected] (Ir, ITS; M.Eng, Tokyo Institute of Technology, Japan; Dr, UI): Heterog- enous catalyst.
Prof. Ir. Sutrasno Kartohardjono, M.Sc, PhD
[email protected] (Ir, UI; MSc, UTM, Malaysia; PhD, University of New South Wales, Aus- tralia): Gas absorption and desorption in hollow fiber membrane contractor, utilization of hollow fiber membrane for efficient biomass production.
Prof. Dr. Ir. Anondho Wijanarko, M.Eng
[email protected](Ir, UI; M.Eng, Tokyo Institute of Technology, Japan; Dr, UI): Bioprocess engineering.
Prof. Dr. Ir. Setijo Bismo, DEA
[email protected](Ir, ITB; DEA and Dr, ENSIGC Toulouse, France): Ozone and plasma technol- Prof. Dr. Ir. Slamet, MTogy.
[email protected] (Ir, UGM; MT, UI; Dr, UI): Photocatalysis.
Prof. Ir. Dr.-Ing. Misri Gozan, M.Tech
[email protected] (Ir, UI; M.Tech, Massey University, New Zealand; Dr.-Ing, TU Dresden, Germany): Environmental bioprocess engineering, waste to energy.
Prof. Dr. Ir. Heri Hermansyah, M.Eng
[email protected] (ST, UI; M.Eng and Dr, Tohoku University, Japan): Reaction process engineer- ing, bioprocess and biocatalysis.
Prof. Ir. Mahmud Sudibandriyo, M.Sc., Ph.D
[email protected] (Ir, ITB; M.Sc and PhD, Oklahoma State University, USA): Thermodynamics adsorption & coalbed methane.
Prof. Dr. Ir. Nelson Saksono, MT
[email protected] (Ir, UI; MT, UI; Dr, UI): Elelctrolysis Plasma Technology FULL-TIME FACULTY
Abdul Wahid [email protected] (Ir, UI; MT, UI; Dr, UTM): Modeling and simulation.
Andy Noorsaman Sommeng [email protected] (Ir, UI; DEA UTC, France; Dr, Ecole Centrale de Paris, France): Process system engineering.
Asep Handaya Saputra [email protected] (Ir, UI; M.Eng and Dr, Tokyo Institute of Technology, Japan): Composite material, natural gas transportation.
Bambang Heru [email protected] (ST, UI; MT, UI; Dr, UI): Bioconversion (biofuel), process computation.
Dewi T. Budi [email protected] (Ir, UGM; MT, ITB; PhD, Chalmers University, Sweden): Process catalysis.
Dianursanti [email protected] (ST, UI; MT, UI; Dr, UI): Biomass production and CO2 fixation of microalgae.
Dijan Supramono [email protected] (Ir, ITB; M.Sc, UMIST, UK): Fluid mechanics in combustion.
Eva Fathul Karamah [email protected] (Ir, UI; MT, UI; Dr, UI): Wastewater treatment by advanced oxidation processes.
Eny Kusrini [email protected] (S.Si, UGM; Dr, USM, Malaysia): Lanthanide, nanocomposites, catalyst.
Kamarza Mulia [email protected] (Drs, ITB; M.Sc and PhD, Colorado School of Mines, USA):
Controlled release of drug and bioactive compounds, fluid phase equilibria, teaching-learning methods.
Muhammad Ibadurrohman [email protected] (ST, UI; MT, UI; MScEng, NTUST, Taiwan; Dr, Imperial College London, UK): Hydrogen production via photocatalysis.
Muhamad Sahlan [email protected] (S.Si, ITB; M.Eng and Dr, TUAT, Japan): Protein Engineering, protein vehicles for nutraceuticals, and biocatalysis.
CHEMICAL ENGINEERING
36
Praswasti PDK Wulan [email protected] (Ir, UI; MT, UI; Dr, UI): Sustainable energy.
Rita Arbianti [email protected] (Ir, UI; M.Si, UI): Natural product.
Setiadi [email protected] (Ir, ITS; M.Eng, Tokyo Institute of Technology, Japan; Dr, UI): Reaction engineering, catalyst and catalysis for renewable, hydrocarbon chemicals/petrochemicals.
Sukirno [email protected] (Ir, ITB; M.Eng, Tokyo Institute of Technology, Japan; Dr, UI): Tribol- ogy, lubricant, biolubricant.
Tania Surya Utami [email protected] (Ir, UI; MT, UI; Dr, UI): Bioprocess.
Yuliusman [email protected] (Ir, UI; M.Eng, UTM, Malaysia; Dr, UI): Liquid-liquid extraction, gas and polluttan adsorption, and purification of smoke.
Yuswan Muharam [email protected] (Ir, UI; MT, UI; Dr.rer.nat, University of Heidelberg, Ger- many): Modeling and simulation of chemical process.
PART-TIME FACULTY
Prof. Dr. Ir. Roekmijati WS., M.Si (Ir, UGM; M.Si, UI; Dr, IPB): Industrial waste management, catalysis, polimer.
Tilani Hamid [email protected] (Ir, ITB; M.Si, UI): Material and corrosion science.
Elsa K. Mulia [email protected] (S.Si, ITB; PhD, Colorado School of Mines, USA): Applied chemistry, biomass conversion, teaching-learning methods.
CHEMICAL ENGINEERING
37
1.5.7. DEPARTMENT OF INDUSTRIAL ENGINEERINGGENERAL
Industrial Engineering Education is an answer to a growing need of industrial engineers who have the capabilities of managing production or operations process efficiently and effectively to achieve excellence. Industrial Engineers should be one of the backbones for transforming our national industry to be more competitive and contribute to our nation’s welfare. The scope of the term industry is for both service and manufacturing industry.
Industrial Engineering Program was actually formed in the mid 1970s as a part of Mechanical Engineering Department, due to the market needs for a specialized mechanical engineers which defines the current definition of industrial engineers. In 1998, based on Decree by Higher Educa- tion Director No 207/DIKTI/Kep/1998 dated June 30 1998, the Industrial Engineering Department was born. With the new status as department, the program had more autonomy and opportunity to enhance the Industrial Engineering Discipline in
Indonesia.
After 10 years as an independent Department, Industrial Engineering has been recognized by the national public and industry as one of the forefronts industrial engineering education in Indonesia.
This is shown by the high demand and acceptability of our graduates. Today, our graduates have been accepted not only in the manufacturing industry but also service industry such as govern- ments, hospital, financial service, consulting, information technology and many others. In the manufacturing area, we have graduates in charge of production or operations management, hu- man resource development, maintenance, inventory and logistics, and many more.
Corresponding Address
Department of Industrial Engineering Faculty of Engineering Universitas Indonesia Kampus UI Depok 16424, Indonesia
Telp: +62-21-78888805 Fax: +62-21-78885656 Email: [email protected] http://www.ie.ui.ac.id
VISION and MISSION Vision
“ To be a premier industrial engineering higher education institution with good national and inter- national reputation in providing high quality graduates and researches.”
Mission
• Establishing education to provide high quality graduates accepted by national and international industry
• Fostering researches to answer the needs of national industry
• Harnessing the knowledge of industrial engineering for the welfare of the society STAFF OF THE DEPARTMENT OF INDUSTRIAL ENGINEERING
Head of Department:
Dr. Akhmad Hidayatno, ST, MBT Vice Head of Department:
Dr.-Ing. Amalia Suzianti, ST., M.Sc.
Head of Laboratory
Head of Manufacturing System Laboratory:
Prof. Dr. Ir. T. Yuri M. Zagloel, MEngSc Head of Human Factors Laboratory:
Ir. Boy Nurtjahyo, MSIE
INDUSTRIAL ENGINEERING
38
Head of System Engineering Modeling and Simulation Laboratory:
Dr. Akhmad Hidayatno, ST, MBT
Head of Statistics and Quality Engineering Laboratory:
Prof. Ir. Isti Surjandari P., MT, MA, PhD
Head of Product Development and Innovation Laboratory:
Dr.-Ing. Amalia Suzianti, ST, MSc.
Head of Management Information System and Decision Support Laboratory:
Dr. Ir. M. Dachyar, MSc
BOARD OF PROFESSORS
Prof. Dr. Ir. Teuku Yuri M. Zagloel, MengSc.
[email protected] (Ir, UI; MEngSc., University of New South Wales, Australia ; Dr, UI), Introduction to Industrial Engineering, Total Quality Management, Lean Operations, Sustainable Manufac- turing and Innovation, Manufacturing Facilities Planning and Analysis, Manufacturing System.
Prof. Ir. Isti Surjandari P., MT., Ph.D
[email protected] (Ir, UI; MT, ITB; MA, Ohio State University, USA; Ph.D, Ohio State University, USA) Introduction to Economics, Industrial Statistics, Multivariate Analysis, Data Mining, Deci- sions, Uncertainties and Risks, Service Engineering, Advanced Statistics.
FULL-TIME FACULTY
Akhmad Hidayatno, [email protected] (Ir, UI; MBT, Univ. Of New South Wales, Australia, Dr, UI) System Modelling, Quality System, Industrial Simulation, System Engineering, Technology Management, System Dynamics, Interpersonal Skills, Advance Modelling, System Thinking.
Amalia Suzianti, [email protected] (ST, UI; MSc., BTU Cottbus, Germany; Dr.-Ing., TU-Berlin, Germany – University of Luxembourg) Product Design, Industrial Engineering Design, Industri- al Technology Management, Product Lifecycle Management, Sustainable Manufacturing and Innovation, Knowledge Management, Industrial System Design, Technology Entrepreneurship.
Armand Omar Moeis, [email protected] (ST, UI; MSc, TU Delft, The Netherlands; Cand Dr., UI) System Modelling, System Engineering, Industrial Simulation, System Dynamics, Advanced Modelling, System Thinking.
Arian Dhini, [email protected] (ST, ITB; MT, UI; Cand Dr, UI) Statistics and Probability, Industrial Statistics, Cost Accounting, Multivariate Analysis, Advanced Statistics.
Arry Rahmawan, [email protected] (ST, UI ; MT, UI) System Modelling, System Engineering, Industrial Simulation, System Dynamics
Billy M. Iqbal, [email protected] (SDs, ITB ; MT, UI) Cognitive Ergonomics, Human Digital Modelling and Simulation, Human Factors in Industrial Design, Product Design
Boy Nurtjahyo Moch, [email protected] (Ir, UI; Wayne State University, USA) Methods, Stan- dards and Work Design, Macro Ergonomics, Cognitive Ergonomics, Human Digital Modelling and Simulation, Human Factors in Industrial Design, Safety Engineering and Management.
Dendi P. Ishak, [email protected] (BSIE ; MSIE, Wayne State University, USA; Cand Dr, University of Malaya, Malaysia) Introduction to Industrial Engineering, Maintenance System, Customer Relationship Management, Competitive Analysis, Information System, Industrial Project Mana- gement, Safety Engineering and Management.
Djoko S. Gabriel, [email protected] (Ir, ITB; MT, ITB; Dr, UI) Plant Layout Design, Industrial Feasibility Analysis, Supply Chain Management, Technology Management.
Erlinda Muslim, [email protected] (Ir, ITB; MEE, UTM Malaysia) Cost Accounting, Product Design, Industrial Feasibility Analysis, Competitive Analysis, Industrial Psychology and Organization, Industrial Strategic Design, Human Capital Management, Technology Policy, Industrial Policy, Industrial System Design.
Fauzia Dianawati, [email protected] (Ir, UI; MSi, UI; Cand Dr, ISSTIA, France) Industrial Psychology and Organization, , Industrial Project Management, Industrial Strategic Design, Human Capital Management.
Farizal, [email protected] (SMIA, UI; MSc, Oklahoma State University, USA ; PhD. University of Toledo, USA) Engineering Economics, Linear Programming, Finance and Investments, Opera- tions Research, Advanced Operations Research, Advanced Optimization, Interpersonal Skills.
Inaki M. Hakim, [email protected] (ST, Universitas Sebelas Maret Surakarta ; MT, ITB) Production Process, Industrial Psychology and Organization, Sustainable Manufacturing and Innovation, Reconfigurable Manufacturing System
Komarudin, [email protected] (ST, UI; MEng. UTM, Malaysia; Dr, VU, Brussel, Belgium) System Modelling, Advanced Operations Research, Advanced Optimization, Game Theory, Liniear and