GUID-42931885-4194-4E80-93A9-AA1E41237E77
SPA2074
The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch . When the Intelligent Key battery is discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operating range becomes narrower, and the Intelligent Key may not function properly.
The operating range is within 80 cm (31.50 in) from each request switch .
If the Intelligent Key is too close to the door glass or door handle, the request switches may not function.
When the Intelligent Key is within the operating range, it is possible for anyone, even someone who does not carry the Intelligent Key, to push the request switch to lock/unlock the doors.
USING INTELLIGENT KEY SYSTEM
GUID-090D67B5-5C36-4958-817D-467781DAF44FSPA2408
The request switch will not function under the following conditions:
. When another Intelligent Key is left inside the vehicle
. When the Intelligent Key is not within the operational range
. When any door is open or not closed securely
. When the Intelligent Key battery is dis- charged
. When the ignition switch is in the “ACC” or
“ON” position
The Intelligent Key system (opening/closing doors with the door handle request switch) can be set to remain inactive. (See “Settings”
(P.2-20).)
SPA2407
. Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the Intelligent Key is outside the vehicle.
. After locking the doors using the door handle request switch, make sure that the doors have been securely locked by oper- ating the door handles.
. When locking the doors using the door handle request switch, make sure to have the Intelligent Key in your possession before operating the door handle request switch to prevent the Intelligent Key from being left in the vehicle.
. The door handle request switch is opera- tional only when the Intelligent Key has been detected by the Intelligent Key sys- tem.
Pre-driving checks and adjustments
3-7
3-8
Pre-driving checks and adjustments . Do not pull the door handle before pushingthe door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door.
SPA2710
SPA2545
When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver’s or front passenger’s) or back door request switch within the range of operation.
When you lock or unlock the doors or open the back door, the hazard indicator will flash and the outside chime will sound as a confirmation.
For details, see “Hazard indicator and horn operation” (P.3-12).
Welcome light and farewell light func- tion
GUID-5B7D808A-F3B3-43AD-8A5F-1F1C6BC842A4When you lock or unlock the doors, the clearance lights, tail lights and the license plate lights will illuminate for a period of time.
Locking doors
GUID-0585D1D2-94DD-4821-B668-85476915C5CE1. Push the ignition switch to the “OFF”
position.
2. Carry the Intelligent Key with you.
3. Close all doors.
4. Push the door handle request switch (driver’s or front passenger’s door) or the back door request switch .
5. All doors will be locked.
6. Operate door handles to confirm that the doors have been securely locked.
Lockout protection:GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To prevent the Intelligent Key from being accidentally locked in the vehicle, lockout protection is equipped with the Intelligent Key system.
. When the Intelligent Key is left in the vehicle while the driver’s door is opened and you try to lock the door using the power door lock switch after getting out of the vehicle, all the doors will unlock automatically after the power door lock switch is operated.
CAUTION:
The lockout protection may not function under the following conditions:
. When the Intelligent Key is placed on top of the instrument panel.
. When the Intelligent Key is placed inside of the glove box.
. When the Intelligent Key is placed inside of the door pockets.
. When the Intelligent Key is placed inside or near metallic materials.
The lockout protection may function when the Intelligent Key is outside the vehicle but is too close to the vehicle.
Unlocking doors
GUID-41D1264F-3D48-4A20-93EA-68F6FB8CE9B11. Carry the Intelligent Key with you.
2. Push the door handle request switch or the back door request switch .
3. All doors will be unlocked.
If a door handle is pulled while unlocking the doors, that door may not be unlocked. Return- ing the door handle to its original position will unlock the door. If the door does not unlock, after returning the door handle, push the door handle request switch to unlock the door.
Automatic relock:GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
All doors will be locked automatically unless one of the following operations is performed within 30 seconds after pushing the request switch while the doors are locked.
. Opening any doors.
. Pushing the ignition switch.
If during the preset time period the “UNLOCK”
button on the Intelligent Key is pushed, all doors will be locked automatically after the next preset time.
Opening back door
GUID-3DAB1324-4117-44B2-B47C-C81B887E79571. Carry the Intelligent Key with you.
2. Push the back door opener switch . 3. The back door will unlock and open. (All the
other doors are unlocked.)
BATTERY SAVER SYSTEM
GUID-1DD3EA15-7EDC-4776-8084-CBD01D7D4450When all the following conditions are met for a period of time, the battery saver system will cut off the power supply to prevent battery dis- charge.
. The ignition switch is in the “ACC” or “ON”
position, and
. All doors are closed, and
. The shift lever is in the “P” (Park) position.
WARNING AND AUDIBLE REMINDERS
GUID-A2F06DAE-6F5E-4B74-A6D5-EC6F6C7C5FA8The Intelligent Key system is equipped with a function that is designed to minimize improper operations of the Intelligent Key and to help prevent the vehicle from being stolen. A chime or beep sounds inside and outside the vehicle and a warning message appears in the vehicle information display.
See the troubleshooting guide on the next page and “Vehicle information display (models with color display)” (P.2-19).
CAUTION:
When the chime or beep sounds or the warning message appears, be sure to check both the vehicle and the Intelligent Key.
Pre-driving checks and adjustments
3-9
3-10
Pre-driving checks and adjustmentsTROUBLESHOOTING GUIDE
GUID-8046F183-0177-43C0-9B8B-E0B87481924ESymptom Possible cause Action to take
When pushing the ignition switch to stop the engine
The Shift to Park warning appears in the vehicle information display and the inside warning chime sounds continuously or for a few seconds.
The shift lever is not in the “P” (Park) position.
Shift the shift lever to the “P” (Park) position.
When shifting the shift lever to the P (Park) position
The inside warning chime sounds continuously.
The ignition switch is in the “ACC” or
“ON” position.
Push the ignition switch to the
“OFF” position.
When opening the driver’s door to get out of the vehicle
The inside warning chime sounds continuously.
The ignition switch is in the “ACC”
position.
Push the ignition switch to the
“OFF” position.
When closing the door after getting out of the vehicle
The No Key Detected warning ap- pears on the display, the outside chime sounds 3 times and the inside warning chime sounds for a few seconds.
The ignition switch is in the “ACC” or
“ON” position.
Push the ignition switch to the
“OFF” position.
The Shift to Park warning appears in the vehicle information display and the outside chime sounds continuously.
The ignition switch is in the “ACC” or
“OFF” position and the shift lever is not in the “P” (Park) position.
Move the shift lever to the “P” (Park) position and push the ignition switch to the “OFF” position.
When pushing the request switch or the “LOCK” button on the Intelligent Key to lock the door
The outside chime sounds for a few seconds and all the doors unlock.
The Intelligent Key is inside the
vehicle. Carry the Intelligent Key with you.
When closing the door with the inside lock knob turned to “LOCK”
The outside chime sounds for a few seconds and all the doors unlock.
The Intelligent Key is inside the
vehicle. Carry the Intelligent Key with you.
When pushing the door handle request switch to lock the door
The outside chime sounds for a few seconds.
The Intelligent Key is inside the
vehicle. Carry the Intelligent Key with you.
A door is not closed securely. Close the door securely.
The door handle request switch is pushed before the door is closed.
Push the door handle request switch after the door is closed.
Symptom Possible cause Action to take
When pushing the ignition switch to start the engine
The Key Battery low warning ap- pears in the vehicle information display.
The battery charge is low. Replace the battery with a new one.
(See “Battery” (P.8-18).) The No Key Detected warning ap-
pears in the display and the inside warning chime sounds for a few seconds.
The Intelligent Key is not in the
vehicle. Carry the Intelligent Key with you.
When pushing the ignition switch
The Key System Error warning ap- pears in the vehicle information display.
It warns of a malfunction with the electrical steering lock system or the Intelligent Key system.
Contact a NISSAN dealer.
Pre-driving checks and adjustments
3-11
3-12
Pre-driving checks and adjustmentsUSING REMOTE KEYLESS ENTRY SYS- TEM
GUID-DF9A5FE7-42F8-4685-B4C4-BAA45A6FB4F3SPA2349
LOCK button UNLOCK button
Operating range
GUID-723F4C54-0341-43BF-AABF-FF16D12D5CDFThe remote keyless entry system allows you to lock/unlock all doors including the back door.
The operating distance depends upon the conditions around the vehicle. To securely operate the lock and unlock buttons, approach the vehicle to about 1 m (3.3 ft) from the door.
The remote keyless entry system will not function under the following conditions:
. When the Intelligent Key is not within the operational range.
. When the Intelligent Key battery is dis- charged.
For information regarding the replacement of a battery, see “Intelligent Key battery” (P.8-20).
Locking doors
GUID-BD2B6C1A-1036-485E-A231-E3D872C58A861. Place the ignition switch in the “OFF”
position.
2. Carry the Intelligent Key with you.
3. Close all doors (including the back door).
4. Push the “LOCK” button on the Intelligent Key.
5. All doors will be locked.
6. Operate the door handles to confirm that the doors have been securely locked.
CAUTION:
. After locking the doors using the Intelli- gent Key, be sure that the doors have been securely locked by operating the door handles.
. When locking the doors using the Intelli- gent Key, be sure not to leave the key in the vehicle.
Unlocking doors
GUID-550F90C5-CBB7-4387-96DF-4F16AC5FBC691. Push the “UNLOCK” button on the Intelligent Key.
2. All doors (including the back door) will be unlocked.
Automatic relock:GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
All doors will be locked automatically unless one of the following operations is performed within 30 seconds after pushing the “UNLOCK”
button on the Intelligent Key while the doors are locked. If during this 30-second time period, the “UNLOCK” button on the Intelligent Key is pushed, all doors will be locked automatically after another 30 seconds.
. Opening any door or back door.
. Pushing the ignition switch.