An N2 adsorption-desorption analysis for the sample showed that the BET surface area of the activated carbon was 1336 m2 g-1. The porosity properties of CP-based activated carbon were investigated using the N2 adsorption-desorption method. Diffraction patterns were obtained using a diffractometer (Bruker AXS D8 advance) using CuK radiation with a range of 2 from 0o to 70o. The performance of the fabricated supercapacitor cells was investigated by an electrochemical impedance spectroscopy measurement using a Solartron 1286 performed at a 10 mV frequency range from 100 kHz to 10 mHz.
The presence of CNTs should improve the resistive and capacitive properties of the CP-based activated carbon electrode and will be discussed in detail in the cell properties discussion section. From Table 3, the influence of CNTs on the CP-based activated carbon electrode clearly improves the electrical properties of the cells. Using a relation Csp = -1/Z” [8], the specific capacitance of the composite electrodes can be obtained from the Nyquist plot (Fig. 4).
The addition of CNTs as additive conductive materials has also shown a great improvement for resistive and capacitive properties of the CP-based activated carbon electrode. The improvement of the resistive and capacitive properties of the electrode showed that the CP-based activated carbon electrode by adding CNTs has increased significantly. Composite electrodes of activated carbon derived from cassava peel and carbon nanotubes for supercapacitor applications (Conference Paper).
A N adsorption-desorption analysis for the sample indicated that the BET surface area of the activated carbon was 1336 m g.
I Made Joni, Camellia Panatarani, Darmawan Hidayat, Setianto, Bambang Mukti Wibawa, Anton Rianto and Husni Thamrin. Preparation of a binder-free activated carbon monolith from rubber wood sawdust prior to carbonization by controlling carbonization and activation conditions. Bis(1,2,5-thiadiazolo)-p-quinobis(1,3-dithiol) (BTQBT) templating effect on the structure and performance of organic solar cells.
Synthesis of (Pb,Ni)-doped multiferroic systems via a sol-gel method and their magneto-electric properties. Fabrication and characterization of dye-sensitized solar cells (DSSCs) with sol-gel-derived gel electrolytes. Effects of nanoanatase-rutile volume fraction with natural dye containing anthocyanin on the dye-sensitized solar cell performance.
Characterization of the physical properties of Porong Sidoarjo mud and its potential as CO gas absorbing materials. Preparation of ZnO nanoparticles for P3HT:ZnO:PCBM nanoparticle blend thin film and charge carrier dynamics characterization. Synthesis and characterization of PVP-capped ZnO particles and its blend with poly(3-hexylthiophene) for hybrid solar cell application.
Effect of the flame temperature on the properties of zirconium oxide fine particles synthesized by flame-assisted spray pyrolysis. Application of spectrometer cropscan MSR 16R and Landsat imagery for the identification of the spectral characteristics of land cover. Temperature modeling for analysis and design of the sinter furnace in HTR fuel ball type.
Bambang Mukti Wibawa, Abdul Al Mujahid, Jajat Yuda Mindara, Camellia Panatarani, I Made Joni dan Rustam Efendi Siregar. Sifat optik titik kuantum silikon amorf (a-Si QDs) dengan ukuran titik berbeda menggunakan teori Hückel yang diperluas. Setiato, Liu Kin Men, Ferry Faizal, Bambang Mukti Wibawa, Doy Hardoyo Hardjo, Camellia Panatarani dan I Made Joni.
Padjadjaran International Physics Symposium 2013
Book of Abstract
Preface
Content
Symposium Program
1 st Day: May 7, 2013
2 nd Day: May 8, 2013
3 rd Day: May 9, 2013
Advisory Board
Organizing Committee
Chairperson
Secretary
Program
Publication and Documentation
Transportation and Accommodation
Logistics
Sponsorship
Consumption
Proceeding
Secretariat
Keynote Speakers
Invited Speakers
Contributed Speakers Material Science
Raman Spectra of Mixtures of Regioregular Poly(3-. Hexylthiophene) (P3HT) and [6,6]-Phenyl-C61-Butyric Acid Methyl Ester (PCBM). Infrared Photoinduced Absorption by Thin Films of Regiopoly(3-hexylthiophene) (P3HT), [6,6]-Phenyl-C61-Butyric Acid Methyl Ester (PCBM) and ZnO Nanoparticles. Charge carrier dynamics in poly(3-hexylthiophene): Blend of zinc oxide nanoparticles for hybrid solar cell active material.
MS - 21 Study the doping properties of Nano Ag and TiO2 in polyvinyl alcohol using electrospinning. Magnetic properties at room temperature of Bi-2212 and (Bi,Pb)-2212 nanosuperconductors synthesized by solution mixing method. Preparation of ZnO nanoparticles for a mixture of P3HT:ZnO nanoparticles:PCBM thin film and the characterization of the charge carrier dynamics.
MS - 31 Effects of Ni impurities on the cu-spin dynamics of electron-doped superconducting cuprates. The technique of Lloyd-Mirror interference for fabricating 1D and 2D gratings using hybrid polymer material. Effect of driving current on emission spectra and color coordinates of DCM-doped hybrid polymer-based hybrid LED.
Instrumentation and Theory
Panagpada ti koriente ti tunnel kadagiti n-p-n a bipolar a transistor babaen ti panagusar ti armchair graphene nanoribbon ken zigzag graphene nanoribbon. Tuti Aryati Demen - Liu Kin Men - Dwindra Wilham Maulana mp3
Geophysics
Afterslip displacement around Banda Aceh after two large earthquakes in North Sumatra 2004–2005 based on surface deformation. Electrode Selection on Physical Modeling of Time Domain Induced Polarization (TDIP), Case Studies of Homogeneous Isotropic Medium. Determination of deoxygenation rate based on the physical condition of the river body (case study of the Citepus River).
Virtual and Super – Virtual Refraction Method: Application to Synthetic Data and 2012 of Karangsambung Survey Data.
Padjadjaran International Physics Symposium 2013 Contribution of Physics on Environmental and
Cobalt ferrite oxide (CoFe2O4) has been successfully prepared by a sol-gel method using methaoxyethanol as solution and diethanolamine as catalis. Magnetization and their hysteresis properties were measured by a vibrating sample magnetometer to investigate residual magnetization, coercive field and uniaxial anisotropy field. Detailed descriptions of the effect of the pH of a methaoxyethanol solution on their structure and magnetic properties of CoFe2O4 will be discussed.
The preparation of ferrite materials has received much attention due to their significant importance to the industries of electronic materials, magnetic rubber and plastic bonded magnet, magneto-optical (MO)/magnetic disk recording, millimeter wave filters, Devices with frequency tuning provided by an external magnetic field device, coplanar waveguide (CPW) from microwave integrated circuits (MIC) and monolithic microwave integrated circuits (MMIC) [1-5],. The optimal structure for enhanced magnetic properties of Co ferrite is perfect inverse spinel (oxygen layers and six Fe3+ ions) [8], in which the octagonal B sites are occupied by 8 Co2+ and 8 Fe3+. Main advantage: good control of ferrite particle formation, reduction of baking temperature and.
The magnetic characterization is also increased by adding the pH of methoxyethanol solution to the sample Co2+: Fe3+= 33.67 (CFO1 and CFO5) 5.
A bstract
FTIR M easurement
CERTIFICATE
ABSTRACT
