The Assessment of BRT Trans Semarang Service Quality

(1)

LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH : PROSIDING

Judul Karya Ilmiah (Paper) : The Assessment of BRT Trans Semarang Service Quality Jumlah Penulis : 2 Penulis

Status Pengusul : AN Adibah, Okto Risdianto Manullang

Identitas Jurnal Ilmiah : a. Judul Prosiding : InCeas International Conference on Engineering and

Applied 2019

b. ISBN/ISSN : eISSN : 1755-1315| pISSN : 1755-1307 c. Tahun Terbit : Volume 771 (2020) 012045

d. Penerbit/ Organiser : IOP Publishing Ltd.

f. Alamat Repository :

https://iopscience.iop.org/article/10.1088/1757-899X/771/1/012045/pdf g. Terindeks di (jika ada) : Scimagojr; Publons; dan Scopus

Kategori Publikasi Makalah : Prosiding Forum Ilmiah Internasional (beri pada kategori yang tepat) Prosiding Forum Ilmiah Nasional Hasil Penilaian Peer Review :

Komponen Yang Dinilai

Nilai Maksimal Jurnal Ilmiah

Nilai Akhir Yang Diperoleh Internasional Nasional

a. Kelengkapan unsur isi artikel (10%) 1,5 0,75

b. Ruang lingkup dan kedalaman

pembahasan (30%) 4,5 2,5

c. Kecukupan dan kemutahiran

data/informasi dan metodologi (30%) 4,5 3,25

d. Kelengkapan unsur dan kualitas

terbitan/jurnal (30%) 4,5 2,5

Total = (100%) 15 9

Nilai Pengusul :

Catatan Penilaian artikel oleh Reviewer :

a) Kesesuaian dan kelengkapan unsur artikel: Artikel sesuai dengan tema prosiding, unsur artikel (abstract, introduction, methodology, result, discussion, recommendation).

b) Ruang lingkup dan kedalaman pembahasan: Ruang lingkup artikel relevan dengan topik prosiding, analisis dan pembahasan kurang jelas dan detail dan langsung hasil table tanpa ada penjelasan, tidak ada dialog dengan literatur, hasil dan diskusi sangat singkat tidak memberikan interpretasi hasil assessment.

c) Kecukupan dan kemutakhiran data/informasi dan metodologi: Data kurang, metode kurang mutakhir untuk operasionalisasi analisis. Referensi sangat kurang dan tidak digunakan dalam analisis.

d) Kelengkapan unsur dan kualitas terbitan: Unsur dan kualitas prosiding terindex scopus.

Similarity index Turnitin 14%. Sebagai penulis kedua, dapat digunakan sebagai prasyarat untuk pengusulan kenaikan jabatan fungsional Lektor Kepala.

Semarang, Reviewer 1,

Dr. Ir. Rina Kurniati, MT NIP.196608221997022001 Departemen PWK FT.Undip 15

(2)

LEMBAR

Identitas Jurnal Ilmiah : a. Judul Prosiding : InCeas International Conference on Engineering and

Applied 2019

Nilai Maksimal Jurnal Ilmiah

Nilai Akhir Yang Diperoleh Internasional Nasional

e. Kelengkapan unsur isi artikel (10%) 1,5 ^1,0

f. Ruang lingkup dan kedalaman

pembahasan (30%) 4,5 ^2,5

g. Kecukupan dan kemutahiran

data/informasi dan metodologi (30%) 4,5 ^3,5

h. Kelengkapan unsur dan kualitas

terbitan/jurnal (30%) 4,5 ^2,5

Total = (100%) 15 ^9,5

Nilai Pengusul :

Catatan Penilaian artikel oleh Reviewer : a. Kelengkapan unsur isi artikel:

Unsur isi artikel cukup lengkap sesuai dengan “Guide of Author” (abstract, introduction, method, results, discussion, recomendation, and references). Tidak terdapat acknowledgment. Isi artikel sesuai dengan bidang ilmu penulis.

b. Ruang lingkup dan kedalaman pembahasan:

Substansi artikel sesuai dengan ruang lingkup The Assessment of BRT Trans Semarang Service Quality yang dibahas dengan cukup lengkap. Bagian metode sudah dijelaskan secara lengkap. Kedalaman pembahasan kurang karena hanya didukung dengan 7 referensi.

c. Kecukupan dan kemutahiran data/informasi dan metodologi:

Metode yang digunakan yaitu deskriptif kuantitatif menggunakan Kano Model. Data dan metode yang digunakan cukup mutakhir Turnitin Similiarity Index 14 %.

d. Kelengkapan unsur dan kualitas terbitan/jurnal:

15

(3)

Artikel ini tergolong Prosiding Internasional Bereputasi (IOP proceeding series: Earth and Environmental Science, terindeks di scopus/SJR=0,18 (2019). Beberapa Gambar belum dirujuk di dalam text (Figure 2). Referensi yang digunakan dari 7 referensi dan hanya 4 daftar pustaka yang besumber dari artikel jurnal yang merupakan terbitan kurang dari atau sama dengan 10 tahun terakhir.

Semarang, Reviewer 1,

Prof. Dr. Sunarti, S.T., M.T.

NIP.196704291994032002 Departemen PWK FT.Undip

(4)

LEMBAR

Identitas Jurnal Ilmiah : a. Judul Prosiding :InCeas International Conference on Engineering and

Applied 2019

Nilai Reviewer

Reviewer I Reviewer II Nilai Rata-rata

a. Kelengkapan unsur isi artikel (10%) 0,75 ^1,0 0,87

b. Ruang lingkup dan kedalaman pembahasan (30%)

2,5 ^2,5 2,5

c. Kecukupan dan kemutahiran

data/informasi dan metodologi (30%)

3,25 ^3,5 3,37

d. Kelengkapan unsur dan kualitas terbitan/jurnal (30%)

2,5 ^2,5 2,5

Total = (100%) 9 ^9,5 9,25

Semarang,

Reviewer 1, Reviewer 2,

Dr. Ir. Rina Kurniati, M.T. Prof. Dr. Sunarti, S.T., M.T.

NIP.196608221997022001 NIP. 196704291994032002

Departemen PWK FT.Undip Departemen PWK FT.Undip

(5)

Scanned with CamScanner

(6)

1 of 2

◅ Back to results Next ▻

 Download  Print  E-mail  Save to PDF ⋆ Save to list More...▻

IOP Conference Series: Materials Science and Engineering • Open Access • Volume , Issue • March • Article number • nd International Conference on Engineering and Applied Sciences, InCEAS • Yogyakarta • November

• Code

Document type

Conference Paper • Gold Open Access Source type

Conference Proceedings ISSN

DOI

. / - X/ / /

View less Publisher

Institute of Physics Publishing Original language

English Volume Editors Haryanto null

Views count View all metrics

The Assessment of BRT Trans Semarang Service Quality

Adibah, Amalia Nur ; Manullang, Okto Risdianto Save all to author list

a b

University of Muhammadiyah Malang, Malang, Indonesia Diponegoro University, Semarang, Indonesia

a b

View PDF Full text options Export

Abstract

SciVal Topics Metrics

Abstract

Semarang city is one of the metropolitan cities that has congestion problems. The existence of BRT Trans Semarang becoming an alternative to reduce city congestion problems. Besides the service performance of BRT Trans Semarang, the service quality is also important in considering the travel modes choice. Tangibles are assessed based on the condition of the facility, the existence of

information boards, the presence of officers, and the availability of information. Empathy is assessed based on the existence of accident insurance. Reliability is assessed based on service personnel.

Responsiveness is assessed based on officer responsiveness. Assurance is assessed based on the level of knowledge and politeness of the officers. The main purpose of this research is to assess the service quality of BRT Trans Semarang related to tangibles, empathy, reliability, responsiveness, and assurance

Cited by 0 documents

Inform me when this document is cited in Scopus:

.

⁼

Calculated on May,

CiteScoreTracker

.

⁼

Last updated on April, • Updated monthly

Source details

IOP Conference Series: Materials Science and Engineering

Scopus coverage years: from to

ISSN: - E-ISSN: - X

Subject area: Engineering: General Engineering Materials Science: General Materials Science

Source type: Conference Proceeding

View all documents ▻ Set document alert  Save to source list Source Homepage

CiteScore

.

^

SJR

.

^

SNIP

.

^

CiteScore CiteScore rank & trend Scopus content coverage

i Improved CiteScore methodology

CiteScore counts the citations received in - to articles, reviews, conference papers, book chapters and data papers published in - , and divides this by the number of publications published in - . Learn more▻

×



, Citations - , Documents -



, Citations to date , Documents to date

CiteScore rank

Category Rank Percentile

Engineering

/ rd

Materials Science

/ th



General Engineering

General Materials Science

View CiteScore methodology▻ CiteScore FAQ▻ Add CiteScore to your site🔗 Brought to you byUniversitas Diponegoro

(8)

IOP Conference Series: Materials Science and Engineering

PAPER • OPEN ACCESS

Editorial Team

To cite this article: 2020 IOP Conf. Ser.: Mater. Sci. Eng. 771 011002

View the article online for updates and enhancements.

Macroscopic Flow Models of State Highway Midblocks under Mixed Traffic Flow Conditions: Ramon Magsaysay

Boulevard Case Study

M S Delos Santos^1,*, A R Alzona¹, M A Taguba¹, C M Vahdanipour¹

1Department of Civil Engineering, National University-Manila, 551 M F Jhocson St., Manila, Philippines.

*[email protected], [email protected]

Abstract. Macroscopic flow modelling has been fundamentally used to characterize and predict the traffic flow parameters of a continuous road utilizing the analogy for one- dimensional fluid flow. In the Philippines, Ramon Magsaysay Boulevard is a major arterial road that links Manila City to various important cities in the Metropolis. Due to its noticeable deteriorating performance in addressing the increasing traffic flow demand, this work investigated the corridor capacity and characterized the key traffic elements along the major mid blocks using Greenshields model. It is assumed that road users behave uniformly and continuously distributed over the highway to choose a path to minimize their total travel time based on instantaneous traffic information. Investigation shows volume demands exceeding the design traffic capacities equivalent to 0.7429, 1.7959, 0.7226, and 1.4726 VCR ratios.

1. Introduction

The macroscopic flow of models that are currently used and further utilized today originated from the fundamental assumption that there is a degree of relationship among vehicle positions and their velocities [1]. Elementary principles of fluid motion for one-dimensional flow such as the equation of continuity and the equation of motion have been adapted to traffic modelling, arriving with the general equation

du

dk= −ckⁿ⁻¹² (1) where u = speed

k = density

c, n = arbitrary constants.

On the other hand, Greenshields [2], after assessment of recorded vehicle speeds and densities along a continuous road, conjectured that there is a linear relationship between the two traffic variables, shown as

u = u_f[1 − ^k

k_jam] (2) where uf = free-flow speed

kkam = jam density.

(18)

1

Application of nanopowders in industrial production of mixed feed

M Chkalova^1,*, V Shahov¹, V Pavlidis¹, S Solovyov²

1Orenburg State Agrarian University, Chelyuskintsev str., 18, 460014, Orenburg, Russian Federation.

2Russian Academy of Sciences, Leninsky prosp., 14, 119991, Moscow, Russian Federation.

*e-mail: [email protected]

Abstract. One of the main directions of the feed manufacturing industry development is the improvement of the output product quality that ensures its efficacy in modern agricultural production. Some international experience in using the essential microelements in the form of nanopowders in the diets of farm animals has been gained. The article is devoted to the development and justification of a technical solution to the problem of dispensing ultrafine (nano) powders in the industrial production of combined feeds. The authors carried out theoretical and experimental studies of the influence of the conditions of functioning of industrial-technological equipment on the properties of several nanopowders of micro metals.

The parametric model of the proposed pneumatic dispenser of bulk nanomaterials allows taking into account various structural and technological changes in the dosing process during the preparation of feed mixtures. The author presents a methodology for calculating the oscillatory system of a pneumatic dispenser, including an annular membrane with fixed edges, based on the equivalent replacement of a system with distributed parameters (membrane) with a system with lumped parameters, which allows replacing the oscillatory model with a translational motion model. An engineering-mathematical model that describes forced membrane oscillations, the dispenser oscillation system and the behaviour of the ultrafine material in the working chamber was constructed on its basis. Practical implementation of the results made it possible to obtain a prototype of bulk ultrafine materials dispenser.

1. Introduction

The industrial production of mixed feed is an established industrial sector in the Russian Federation. In modern conditions, the production of mixed feeds is becoming an increasingly important link in the agro-industrial complex [1]. Qualitative and quantitative parameters of livestock production are largely determined by the efficiency of the technological processes of feed production organisation and innovative methods to improve their basic characteristics.

The development of the mixed feed industry and improving combined feeds quality is a prerequisite for the rapid and economically viable livestock production growth, as well as one of the main factors in agricultural production development [1]. The solution to the problem of increasing the efficiency of industrial production of combined feeds is becoming more relevant than ever.

The purpose of the study is to establish the possibilities and conditions for the use of ultrafine materials in a feed production line; development of a technical solution to the problem of dispensing ultrafine powders during feed preparation. To achieve this goal, it is necessary to develop a methodology for experimental studies of the influence of the operating conditions of technological

(19)

IOP Conference Series: Materials Science and Engineering

PAPER • OPEN ACCESS

Determinants factors toward the performance of the employee in the crude palm oil industry in West Sumatera, Indonesia

To cite this article: Hendy Tannady et al 2020 IOP Conf. Ser.: Mater. Sci. Eng. 771 012066

View the article online for updates and enhancements.

Determinants factors toward the performance of the employee in the crude palm oil industry in West Sumatera, Indonesia

Hendy Tannady¹, Johanes Fernandes Andry², Filscha Nurprihatin³

1Department of Management, Universitas Pembangunan Jaya, Indonesia

2Department of Information System, Universitas Bunda Mulia, Indonesia

3Department of Industrial Engineering, Universitas Bunda Mulia, Indonesia corresponding e-mail:^*1[email protected], ²[email protected],

3[email protected]

Abstract. Human resources are the most important part in achieving organisational goals and improving organisational performance, in completing its work human resources require an adequate working environment and compensation as a reward for providing maximum work results. The purpose of this study is to examine and analyse the effect of compensation (X1) and work environment (X2) on employee performance (Y), especially in the crude palm oil industry in West Sumatra. Observations were made on three companies, research conducted in March to June 2019 showed that between compensation and work environment has a positive and significant effect on employee performance. With the structural equation modelling approach and Lisrel 8.8 application assistance, the coefficient of estimated of compensation toward performance is 0.37 while the estimated coefficient of work environment toward performance is 0.42. Compensation and work environment simultaneously have a positive influence on employee performance of 0.65.

1. Introduction

Human resources are the most important part in achieving the goals of an organisation, both large and small organisations, as well as companies as an organisation [4]. Equipment owned by organisations or companies with various levels of technology will be meaningless if not handled properly by appropriate human resources [3]. Human resources are an important element in improving the performance of an organisation [5], [24]. Every leader needs to ensure that every employee who works in their organisation has a high commitment toward his work and provides the best work results for the achievement of organisational goals [12]. It is easier for management to influence the work performance of production equipment because production equipment will work according to instructions and manuals, production equipment also does not require compensation or additional incentives to spur its work performance, but human resources require a combination of various factors both physical and psychologically to increased their work performance [18]. The purpose of this study is to look at the model of the relationship between compensation and work environment toward employee performance.

Research conducted by Akter & Husain on the garment industry in Bangladesh concluded that the provision of appropriate compensation has a positive impact on the work performance of employees [2]. Darma & Supriyanto, in their research at one of the telecommunication company in Indonesia, concluded that the provision of appropriate compensation could play an important role in improving employee performance and job satisfaction [7]. Regarding the impact of a supportive work environment, Malik et al. who conducted a study of 115 employees in telecommunication companies in Pakistan concluded that management could improve the work performance of employees by providing a conducive work environment [13]. In line with Malik et al., a study conducted by Samson

(21)

Submission date: 01-Mar-2021 03:14PM (UTC-0800) Submission ID: 1521720192

File name: Adibah_2020_IOP_Conf._Ser.__Mater._Sci._Eng._771_012045.pdf (560.3K) Word count: 2409

Character count: 12585

The Assessment of BRT Trans Semarang Service Quality

by Okto Manullang

(22)

(23)

(24)

(25)

(26)

(27)

(28)

(29)

14 ^%

SIMILARITY INDEX

14 ^%

INTERNET SOURCES

8 ^%

PUBLICATIONS

9 ^%

STUDENT PAPERS

1 6 ^%

2 3 ^%

3 1 ^%

4 1 ^%

5 1 ^%

6 1 ^%

7 1 ^%

8 < 1 ^%

9 < 1 ^%

Adibah_2020_IOP_Conf._Ser.__Mater._Sci._Eng._771_012045.…

ORIGINALITY REPORT

PRIMARY SOURCES

repository.uin-malang.ac.id

Internet Source

www.researchgate.net

Internet Source

umpir.ump.edu.my

Internet Source

Submitted to Universitas Sebelas Maret

Student Paper

en.wikipedia.org

Internet Source

en.m.wikipedia.org

Internet Source

mafiadoc.com

Internet Source

github.com

Internet Source

ELISA ADELL SALES. "Material particulado y

bioaerosoles en el aire de granjas de aves y

(30)

10 < 1 ^%

11 < 1 ^%

Exclude quotes On Exclude bibliography On

Exclude matches Off

conejos: cuantificación, caracterización y

medidas de reducción", Universitat Politecnica de Valencia, 2014

Publication

download.atlantis-press.com

Internet Source

www.rsisinternational.org

Internet Source

The Assessment of BRT Trans Semarang Service Quality

Scanned with CamScanner

The Assessment of BRT Trans Semarang Service Quality

.

.

Source details

IOP Conference Series: Materials Science and Engineering

.

.

.

Editorial Team

Table of contents

Macroscopic Flow Models of State Highway Midblocks under Mixed Traffic Flow Conditions: Ramon Magsaysay

Boulevard Case Study

Application of nanopowders in industrial production of mixed feed

Determinants factors toward the performance of the employee in the crude palm oil industry in West Sumatera, Indonesia

Determinants factors toward the performance of the employee in the crude palm oil industry in West Sumatera, Indonesia

The Assessment of BRT Trans Semarang Service Quality

by Okto Manullang

14 %

14 %

8 %

9 %

1 6 %

2 3 %

3 1 %

4 1 %

5 1 %

6 1 %

7 1 %

8 < 1 %

9 < 1 %

Adibah_2020_IOP_Conf._Ser.__Mater._Sci._Eng._771_012045.…

repository.uin-malang.ac.id

www.researchgate.net

umpir.ump.edu.my

Submitted to Universitas Sebelas Maret

en.wikipedia.org

en.m.wikipedia.org

mafiadoc.com

github.com

ELISA ADELL SALES. "Material particulado y

bioaerosoles en el aire de granjas de aves y

10 < 1 %

11 < 1 %

conejos: cuantificación, caracterización y

medidas de reducción", Universitat Politecnica de Valencia, 2014

download.atlantis-press.com

www.rsisinternational.org

14 ^%

14 ^%

8 ^%

9 ^%

1 6 ^%

2 3 ^%

3 1 ^%

4 1 ^%

5 1 ^%

6 1 ^%

7 1 ^%

8 < 1 ^%

9 < 1 ^%

10 < 1 ^%

11 < 1 ^%